The nitinol core coronary wire - width should be 0.014 in diameter and length of 180 cm or more. the tip weight should be less than one gram. should have hydrophilic coating. should have 1:1 torquability. should be compatible with dock extension wire

Pvc soft rubber tubing 8mm diameter, unsterile used for suction. should be 25 meter length in a single pack, pvc soft rubber tubing 6mm diameter, unsterile used for suction should be 180 meter length in a single pack

Needle for inside-out meniscal repair with eye for thread.1. standard-length stainless steel with a 38cm or more in length and diameter should be 0.8 mm or less. 2. should be made up of high strength, flexible stainless steel, 3. needle should have eye on non-sharp end to pass minimum 2-0 suture. 4. needles can be used with other meniscal repair systems. (as per detailed specifications attached)

Printing and supply of electric locomotive schedule card ia/ib (enclosed for reference). schedule card record consisting of 34 pages (17 leaves) (english only) note:- (1) paper quality should be minimum 75 gsm. (white) (2) printing should be done on both sides of the paper. (3) after printing, schedule card should be supplied in booklet form either tag (or) pinned. (4) the firm should contact the consignee to collect the updated/finalised schedule form before printing.

Reducing nipple of size 1/2 x 3/8 bsp threading (parallel) on both sides, total length - 40mm; 1/2 threaded length -15 mm; 3/8 threaded length-15mm, hex. head thickness-10mm, width af27mm, 3/8 ends inside should have tapered profile (cone type). material: carbon steel astm-a108 & grade a1018 with zinc coated. note: material should be machined from forged planks & not to be casted.

Set of standardized registers consists of (a3 with printing & binding of 757 registers (14 different types of registers), a4 with printing & binding of 2314 registers (59 different types of registers) & a5 with printing & binding of 1049 registers (14 different types of registers) as per the details enclosed in annexure: i, ii & iii). . printing as per sample enclosed. quality of paper should be 70 gsm & front cover page should be 80 gsm & properly binded. one printing proof should be got appr

Grooved rubber profile for safety strap of retention tank as per drawing no. icf/sk3-6-3-201 alt.-nil. note- length of each unit should be 3370 mm + - 10 mm.

Grooved rubber profile for safety strap of retention tank as per drawing-no. icf/sk3-6-3-201 alt.-nil. the rubber profile should be supplied in length of 2.00 meter.

1) hemoclip rotatable should be a) pre-loaded ready to use b) multiple times reopening capability c) wide jaw span greater than and equal to 16mm d) length 150 to 200cm and 360 degree rotation and 1:1 movement, 2) injection gold probe consists of : a) 7fr injection gold probe combined with sclerotherapy needle and firm catheter shaft b) should have separate irrigation channel, compatible with a 2.8mm working channel c) working length more than 160cm and have a ceramic and gold tip, 3) hemospra

Polyester double layered heavy duty duplex webbing sling reinforced eye at both end (loop) capacity - 2ton, length - 3 meters, having anti abrasive sleeve 0.5 meter long against protection from rough surface as per is:15041-2025. (note - sling should be tested by govt. approved laboratory. certificate to be provided at the time of supply. all sling should have individual metal tag on which mfg year and serial number must be punch