Tender Details
About Tender
🚂 Procurement Opportunity: Hydraulic Pipe Bending Machine 🛠️ The Ministry Of Railways, Specifically The Central Government Ministry/Department, Is Seeking Bids For The Procurement Of A Hand Operated Hydraulic Round Pipe Bending Machine. The Machine Should Have A Bending Capacity From 1/2 Inch To 2 Inches, A Bending Pressure Of 15 Tonne, And The Ability To Bend Pipes Made Of Ms, Ss, Aluminum, And G.I. Up To 90 Degrees. The Machine Must Include 6 Sets Of Bending Formers For Sizes 1/2, 3/4, 1, 1 1/4, 1 1/2, And 2 Inches. The Intended Use Is For Pipe Bending, With A Preference For A Make/Brand Such As Inder Or Similar. The Machine Will Primarily Be Used For Bending G.I. Pipes. 🗓️ Bid Submission Deadline: May 03, 2024, 11:30 Am Interested Bidders Are Advised To Review The Complete Tender Document For Detailed Specifications And Submission Guidelines. Keywords: Hydraulic Pipe Bending Machine, Pipe Bending, Ministry Of Railways, Central Government, Tender, Bid Submission, Gorakhpur| Particulars | Details |
|---|---|
| Title |
Hand Operated, Hydraulic Round Pipe Bending Machine As Per Spec. Bending Capacity From 1/2 Inch To 02 Inch, Bending Pressure 15 Tonne, For Use Ms, Ss, Aluminum, G.I. Pipe Bending, Pipe Bending Upto 90 Degree (Bending Formers 06 Sets Of Size 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 Inch), Make/Brand Inder Or Similar (Material Used For Bending G.I. Pipe)
|
| Description |
For Complete Deion And Other Details, Please Refer To Tender
|
| Organisation | Ministry of Railways | Central Govt. Ministry/Department |
| Tender Id | 106329182 |
|
Reference Number |
10246509 |
| Tender Fee | 0 |
| EMD | 0 |
| Tender Value | |
| Place | Gorakhpur |
| Link | https://www.ireps.gov.in/ireps/supply/pdfdocs/052024/106329182/viewNitPdf_4551366.pdf |
| Start Date | April 26, 2024 16:58 |
| End Date |
03/05/2024 ( Expired 354 days ago ) Search Similar tenders? |
|
Join for More Relevant Opportunities |
Similar Tenders
3 oblic 4 inch round pipe,1 inch round pipe,1.5 inch square pipe,2 inch square pipe,1 inch ms angle
Read more
Hydraulic hose pipe part no.- hs02, length (min.)-0.5 mtr., hose i.d.- 1/4 inch, working pressure 10000 psi with both end male fitting one side 3/8 inch-18 other side 1/4 inch-18 suitable for avlock make hand held unit. make: avlock/avdel or similar reputed brand.
For complete deion and other details, please refer to tender
Read moreSupply, installation, testing & commissioning of mobile work station suitable for stainless steel seamless tube fabrication work on electric locomotives of model no. jnx.el.pf.ssp.ver.1.2022 or its similar(for tube size 1/2 inch od, 15mm od, 3/4 inch od, 22 mm od, 1 inch od, 1 1/4 inch & 1 1/2 inch od). (1) swagelok make multi hydraulic swaging unit. (2) tube bending, cutting & deburring unit(jainex make, model no. jnxhydra - 2022 or its similar) as per els/vijayawada/scr specificat
For complete deion and other details, please refer to tender
Read more[ supply, installation and commissioning of hydraulic pipe bending machine as per following specification:- machine should be capable to bend round ms/gi & ss pipe of 10 to 50 mm diameter. motor capacity: 211p/415v/3 phase/50 hz and 1440 rpm. bending pressure up to 10 ton. tank capacity 30 lts. working pressure (approx.) 300 kg/cm2. machine to be supplied with 1 of seal kit, foot switch, limit switch, stand and stopper. with 10-meter power supply electric cable. make/brand: hydro bend/ va
For complete deion and other details, please refer to tender
Read moreSet of display boards consisting of 4 items (1) supply of uv flat bed digital printing on 3mm thickness aluminum composite panel sheet (acp) of size 5ft. x 4 ft., iron frame (ms) size 3/4 inch square pipe of 5 ft. x 4ft.- qty-06 nos, (2) supply of uv flat bed digital printing on 3mm thickness aluminum composite panel sheet (acp) of size 3ft. x 2 ft., iron frame (ms) size 3/4 inch square pipe of 3 ft. x24ft.- qty-22 nos, (3) ) supply of uv flat bed digital printing on 3mm thickness aluminum
For complete deion and other details, please refer to tender
Read moreCam operated rotary switch change over with centre off (90 degree) 1-0-11-o, 3 pole 2 way, 16 amps, as per following details: i) current rating: 16amps ii) operating voltage: 690 volts ac, iii) contact type: normally closed iv) terminal: screw type v) mounting code: b03 front mounting, standard mounting plate similar to l & t (salzer) make cat. no. 61153 (16a-s16-61153-b03-tdyr). make as per bom of rcf spec edts 355, rev.1 amdt. 6 i.e. siemens/l&t (salzer)/teknic/ge/kaycee.
For complete deion and other details, please refer to tender
Read moreSupply, installation and commissioning of hydraulic pipe bending machine as per following specification:- machine should be capable to bend round ms/gi & ss pipe of 10 to 50 mm diameter. motor capacity: 211p/415v/3 phase/50 hz and 1440 rpm. bending pressure up to 10 ton. tank capacity 30 lts. working pressure (approx.) 300 kg/cm2. machine to be supplied with 1 of seal kit, foot switch, limit switch, stand and stopper. with 10-meter power supply electric cable. make/brand: hydro bend/ vanko
For complete deion and other details, please refer to tender
Read moreHand operated, hydraulic round pipe bending machine as per spec.- bending capacity from 1/2 inch to 02 inch, bending pressure 15 tonne, for use ms, ss, aluminum, g.i. pipe bending, pipe bending upto 90 degree (bending formers 06 sets of size 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 inch), make/brand- inder or similar (material used for bending g.i. pipe)
For complete deion and other details, please refer to tender
Read moreHand operated, hydraulic round pipe ben [ hand operated, hydraulic round pipe bending machine as per spec. - bending capacity from 1/2 inch to 2 inch, bending pressure 15 tonne, for use ms, ss, aluminum, gi pipe bending, pipe bending upto 90 degree, (bending formers 6 sets of size 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 inch), hydrobend with stand make:- inder model 213b or similar]
For complete deion and other details, please refer to tender
Read more
Click
Here to Download Dockets
of your Industry type
of your Industry type