211 Plate Flange In India 2026

Dismantling and fabrication of base plate for 500 gpm motor pump including supply and fixing nut and bolt, flange,bend, short piece, laying and dismantling 6 inch and 8 inch pipeline, cutting, welding and fixing pipeline intake no. 02 and 03 of iwss

Tender EMD: 10700

Tender Fee: 0

Organisation: Central Coalfields Limited | Public Sector Undertakings

Start Date: July 26, 2024 16:30

Place: Gm unit, nk area

Due Date: Expired 808 days ago

Repairing of o/p cabin mountings, engine hood, side plates, steering tie rod mountings, uj assy and flange, foot plate both side tilt cylinders steel pipe, engine and transmission guard tilt guard of d355 dozer sl.no. d21 of piparwar patch, at asho

Tender EMD: 2300

Organisation: Coal India Limited (CIL)

Start Date: September 09, 2023 22:30

Place: Office of po ashok

Due Date: Expired 1132 days ago

Tyre defect gauge for bg wagons of steel plate-3.2 mm thick (min)conforming to is: 226, fe 410-s, all dimensions are in mm, marks to be stamped on both sides of gauge as per drawing at plate 52 of irca enclosed, having condemning thin flange 16mm & flat places 60 mm along with calibration certificate from government certified firm

For complete deion and other details, please refer to tender

Tender EMD: 0

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: June 26, 2024 22:09

Place: Bilaspur

Due Date: Expired 836 days ago

Assy clutch master cyl,universal joint kit,ball joint,handle door rh,flange rear,strap belt kit,oil filter,air filter,dool lock lh outer,water reservoir container,front wheel brg,clutch repair kit,ram assy rep kit,pressure plate,ball bearing,oil seal

Organisation: Indian Army | Department of Military Affairs

Start Date: October 05, 2026 18:52

Due Date: Expired 6 days ago

Flange item no. 6 as per drawing no 4111110190 rev d ( mat code 241111107),guide bar item no. 12 as per drawing no 4111110190 rev d ( mat code 241111113),support plate item no. 13 as per drawing no 4111110190 rev d ( mat code 241111114)

Organisation: Alloy Steel Plant | Steel Authority of India Limited

Start Date: October 07, 2026 18:31

Due Date: Expired 5 days ago

Repairing of oval/damaged holes of hoist drum flange mounting holes by welding and boring of be-195 (sl no-4) shovel and repairing , line boring, fitting of boom bush of shipper shaft assembly , welding of boom wear plate and ring gear teeth repairin

Tender EMD: 12300

Tender Fee: 0

Organisation: Northern Coalfields Limited | Public Sector Undertakings

Start Date: July 25, 2024 15:00

Place: Nigahi project

Due Date: Expired 806 days ago

Making of base plate for pl-3a pump with 400 kw for, welding of 40 nos. 6 inch dia flange in 20 inch m.s. pipe and making of 06 nos. pipe pole 8 mtr. with old and used pipes with other miscellaneous works under a.d.i.c.

Tender EMD: 1200

Tender Fee: 0

Organisation: Bharat Coking Coal Limited | Public Sector Undertakings

Start Date: March 05, 2025 16:30

Place: Adic

Due Date: Expired 590 days ago

Changing of corroded/rusted/ top flange plate, bottom main angle and changing of loose/corroded rivets of bridge no. 2up &amp dn, 6up &amp dn, 7up &amp dn, 8up &amp dn, 10up and 16up &amp dn in kir-bju section under sse/br/mgr in see division.

For complete deion and other details, please refer to tender

Tender EMD: 4.36 Lakh

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: February 29, 2024 19:56

Place: Hazipur

Due Date: Expired 944 days ago

Replacement of top flange plate of girder, cross frame at br. no. 222a (2x12.2m) on mb-gzb section &amp strengthening of rail &amp cross girder, providing screen over web of corss girder on br. no. 36 up (3x30.5m) &amp 36 dn (4x30.5m) on gzb-sre section under jurisdiction of axen/bl/tkj.

For complete deion and other details, please refer to tender

Tender EMD: 2.19 Lakh

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: July 16, 2024 21:11

Place: New delhi

Due Date: Expired 801 days ago

Replacement of top flange plate of girder, cross frame at br. no. 222a (2x12.2m) on mb-gzb section &amp strengthening of rail &amp cross girder, providing screen over web of corss girder on br. no. 36 up (3x30.5m) &amp 36 dn (4x30.5m) on gzb-sre section under jurisdiction of axen/bl/tkj.

For complete deion and other details, please refer to tender

🚂 Procurement Notice: Railway Infrastructure Upgrade 🛠️ The Ministry of Railways, under the Central Government, has issued a tender for the replacement and strengthening of critical components of railway bridges on the MB-GZB and GZB-SRE sections. 🪦🏗️ 📍 Location: New Delhi 📅 Last Date for Submission: May 13, 2024, 3:00 PM 💸 EMD: INR 218700 Interested contractors are advised to review the complete tender document for detailed specifications, scope of work, and submission guidelines. This project is a part of the ongoing efforts to enhance the safety and reliability of the railway infrastructure. Keywords: Railway Infrastructure, Bridge Repair, Ministry of Railways, Tender, Civil Construction, EMD, Government Contract

Tender EMD: 2.19 Lakh

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: April 19, 2024 21:54

Place: New delhi

Due Date: Expired 892 days ago

Results for: Plate Flange

Dismantling and fabrication of base plate for 500 gpm motor pump including supply and fixing nut and bolt, flange,bend, short piece, laying and dismantling 6 inch and 8 inch pipeline, cutting, welding and fixing pipeline intake no. 02 and 03 of iwss

Dismantling and fabrication of base plate for 500 gpm motor pump including supply and fixing nut and bolt, flange,bend, short piece, laying and dismantling 6 inch and 8 inch pipeline, cutting, welding and fixing pipeline intake no. 02 and 03 of iwss

Repairing of o/p cabin mountings, engine hood, side plates, steering tie rod mountings, uj assy and flange, foot plate both side tilt cylinders steel pipe, engine and transmission guard tilt guard of d355 dozer sl.no. d21 of piparwar patch, at asho

Repairing of o/p cabin mountings, engine hood, side plates, steering tie rod mountings, uj assy and flange, foot plate both side tilt cylinders steel pipe, engine and transmission guard tilt guard of d355 dozer sl.no. d21 of piparwar patch, at asho

For complete deion and other details, please refer to tender

Assy clutch master cyl,universal joint kit,ball joint,handle door rh,flange rear,strap belt kit,oil filter,air filter,dool lock lh outer,water reservoir container,front wheel brg,clutch repair kit,ram assy rep kit,pressure plate,ball bearing,oil seal

Assy clutch master cyl,universal joint kit,ball joint,handle door rh,flange rear,strap belt kit,oil filter,air filter,dool lock lh outer,water reservoir container,front wheel brg,clutch repair kit,ram assy rep kit,pressure plate,ball bearing,oil seal

Flange item no. 6 as per drawing no 4111110190 rev d ( mat code 241111107),guide bar item no. 12 as per drawing no 4111110190 rev d ( mat code 241111113),support plate item no. 13 as per drawing no 4111110190 rev d ( mat code 241111114)

Flange item no. 6 as per drawing no 4111110190 rev d ( mat code 241111107),guide bar item no. 12 as per drawing no 4111110190 rev d ( mat code 241111113),support plate item no. 13 as per drawing no 4111110190 rev d ( mat code 241111114)

Repairing of oval/damaged holes of hoist drum flange mounting holes by welding and boring of be-195 (sl no-4) shovel and repairing , line boring, fitting of boom bush of shipper shaft assembly , welding of boom wear plate and ring gear teeth repairin

Repairing of oval/damaged holes of hoist drum flange mounting holes by welding and boring of be-195 (sl no-4) shovel and repairing , line boring, fitting of boom bush of shipper shaft assembly , welding of boom wear plate and ring gear teeth repairin

Making of base plate for pl-3a pump with 400 kw for, welding of 40 nos. 6 inch dia flange in 20 inch m.s. pipe and making of 06 nos. pipe pole 8 mtr. with old and used pipes with other miscellaneous works under a.d.i.c.

Making of base plate for pl-3a pump with 400 kw for, welding of 40 nos. 6 inch dia flange in 20 inch m.s. pipe and making of 06 nos. pipe pole 8 mtr. with old and used pipes with other miscellaneous works under a.d.i.c.

Changing of corroded/rusted/ top flange plate, bottom main angle and changing of loose/corroded rivets of bridge no. 2up &amp dn, 6up &amp dn, 7up &amp dn, 8up &amp dn, 10up and 16up &amp dn in kir-bju section under sse/br/mgr in see division.

For complete deion and other details, please refer to tender

Replacement of top flange plate of girder, cross frame at br. no. 222a (2x12.2m) on mb-gzb section &amp strengthening of rail &amp cross girder, providing screen over web of corss girder on br. no. 36 up (3x30.5m) &amp 36 dn (4x30.5m) on gzb-sre section under jurisdiction of axen/bl/tkj.

For complete deion and other details, please refer to tender

Replacement of top flange plate of girder, cross frame at br. no. 222a (2x12.2m) on mb-gzb section &amp strengthening of rail &amp cross girder, providing screen over web of corss girder on br. no. 36 up (3x30.5m) &amp 36 dn (4x30.5m) on gzb-sre section under jurisdiction of axen/bl/tkj.

For complete deion and other details, please refer to tender

Get new Plate Flange tenders

Need support responding to this opportunity?