Cable thimble to drg. 45380401076 rev 01, item# 002. pvc ratio- 1: 1.6 qty: - 25 nos

Supply of unsaturated polyester resin along with suitable catalyst and accelerator as per att. specs,supply of chopped strand fiber glass mat for fiber reinforced polyester as per att. specification,application of unsaturated poly. resin, catalyst, accelerator and fiber glass mat as per att. specs

Gem schedule - 1 defelector servomotor as per drawing no. 02031622802 (rev. 01) and purchase specifi,gem schedule - 2 set of spare as per sl. no. 1.2 of purchase specification doc: hte/cha/20316/01.,gem schedule - 3 tools as per sl. no. 1.2. 1 of purchase specification doc: hte/cha/20316/01.

Erection of box type scaffolding by using available scaffolding pipes fixing of scaffolding pipes with nuts and bolts etc,documentation and careful removal or dismantling of bulged out or cracked portion of the fort walls adjacent to the breaches,removal of loose earth inside the breach and disposal of the surplus excavated earth away from the monument etc,careful removal of disturbed random rubble base stones below the fort wall and stacking them for reuse,earth work excavation for foundation in trenches to a depth of more than 3 meters,providing and laying lime concrete mixed with 50 percent lime,providing rr masonry footings in cm one in four ratio in stepped manner over the pcc bed with hard granite stones,construction of rr masonry gravity retaining wall in in lime mortar,reconstruction of rr masonry base with available stones in lime mortar,reconstruction of the fallen fortification wall in lm,back filling the breach with gravelly earth mixed with boulders with proper compaction,providing stone pitching

Erection of box type scaffolding by using available scaffolding pipes fixing of scaffolding pipes with nuts and bolts etc for 226.80 sq mtr,documentation and careful removal or dismantling of bulged out or cracked portion of the fort walls adjacent to the breaches for 24.30 cu mtr,removal of loose earth inside the breach and disposal of the surplus excavated earth away from the monument etc for 277.38 cu mtr,careful removal of disturbed random rubble base stones below the fort wall and stacking them for reuse for 35.64 cu mtr,earth work excavation for foundation in trenches to a depth of more than 3 meters for 219.51 cu mtr,providing and laying lime concrete mixed with 50 percent lime for 33.21 cu mtr,providing rr masonry footings in cm one in four ratio in stepped manner over the pcc bed with hard granite stones for 25.92 cu mtr,construction of rr masonry gravity retaining wall in in lime mortar for 283.50 cu mtr,reconstruction of rr masonry base with available stones in lime mortar for 35.64 cu mtr,reconstr

Base oil o ppm 400ml,hydranal water std 1.o - 10 x 4ml -1000ppm,hydranal water std 0.1- 10 x 4 ml-100 ppm,hydranal coulomat cg catholyte for coulometric kf -50ml,hydranal coulomat oil - 100 ml,window cleaner 200 ml,standard oil - 50 ppm 200 ml,standard oil - 20 ppm 200 ml,standard oil - 5 ppm 200 ml,standard oil -1 ppm 200ml,standard oil - 10 ppm 200ml,standard oil - 100 ppm 200ml,m99913 kimwipes ex-l 4.5x8.5inch 1-ply 280 per box,m99914 pipettes transfer 8ml 400 per bx,p-10524 sample holder high temperature 1000 per pkg,m97009 graphite rod .242x6inch agksp pkg 50,m97008 graphite disc d-2 agksp 500 per box,pmkit -kfc cell - refer technical specification sheet for details,base oil o ppm 400ml,base oil o ppm 400ml,hydranal water std 1.o - 10 x 4ml -1000ppm,hydranal water std 1.o - 10 x 4ml -1000ppm,hydranal water std 0.1- 10 x 4 ml-100 ppm,hydranal water std 0.1- 10 x 4 ml-100 ppm,hydranal coulomat cg catholyte for coulometric kf -50ml,hydranal coulomat cg catholyte for coulometric kf -50ml,hydranal coulomat oi

Spherical bearing auto bush rotating part no mh02950307,fuel water separator part no mh36313378,filter element orf elofic ek3246 part no mh02012102,eng.pa fg lf16061 oil filter part no mh36313214,cable -engine item code part no mh02643045,v-belt cogged 1450 long item code- part no mh36313409,rod end part no mh 02319564,sheave part no mh 02205153,cable accelerator part no mh 36500070,elbow,air cleaner part no mh 02640821,cable fwd rev-hi-low- part no mh 59076399,universal joint assy. part no mh 02098793,bush part no mh 02644642,side thrust roller part no mh 02340436,assembly turbo charger part no mh36313383,alternator 12v,35 amps part no mh02551964,pump main part no mh97549660,gasket control cover housing part no mh02014391,hose tlv to tilt cylinder rh rear part no mh39550876,taper roller bearing outer part no mh55300001,knuckle pin part no mh02644639,starter motor part no mh36312241,filter part no mh2318497,thrust bearing on knuckle part no mh54080773,air cleaner donaldson part no mh36500050,maste

Winter route markers with technical specification as per appx a of ts,pcc cement 43 grade in hdpe bag of 50 kg each conf to is 269 to 1976,coarse sand,40mm stone aggregates,quick setting compound,50mm nominal bore gi pipe 3 mtr long 3 point 65mm thick wt 5 point 10 mtr per rm,50mm gi socket nominal bore gi pipe 100mm long internal and external thread thick 3 point 65mm,ms plate 6mm thick size 150mm into 150mm with 4 hole 10mm dia for u clip,250mm long flat iron stiffeners size 25mm into 3mm,8mm dia u shape rod as per drawing,pp rope 12mm dia specified colour,flurescent tape 3 inch thick size 25 mtr long red yellow and white,anti corrosive primer paint,enamel paint og colour,th,2 feet roller brush,open jaw double ended spanner size 10 into 12mm,2 inch pvc water levelling pipe 100 mtr long,masson trowel 150mm,5 kg hammer,brick line,gurmala 200mm wide and 600mm long,plumb bob,iron bucket 10 ltr capacity,iron tasala pan mortor,kassies,showel

Winter route markers with technical specification as per appx a of ts,pcc cement 43 grade in hdpe bag of 50 kg each conf to is 269 to 1976,coarse sand,40mm stone aggregates,quick setting compound,50mm nominal bore gi pipe 3 mtr long 3 point 65mm thick wt 5 point 10 mtr per rm,50mm gi socket nominal bore gi pipe 100mm long internal and external thread thick 3 point 65mm,ms plate 6mm thick size 150mm into 150mm with 4 hole 10mm dia for u clip,250mm long flat iron stiffeners size 25mm into 3mm,8mm dia u shape rod as per drawing,pp rope 12mm dia specified colour,flurescent tape 3 inch thick size 25 mtr long red yellow and white,anti corrosive primer paint,enamel paint og colour,th,2 feet roller brush,open jaw double ended spanner size 10 into 12mm,2 inch pvc water levelling pipe 100 mtr long,masson trowel 150mm,5 kg hammer,brick line,gurmala 200mm wide and 600mm long,plumb bob,iron bucket 10 ltr capacity,iron tasala pan mortor,kassies,showel