Set of six items required for modified wheel set earthing equipment housing as per rcf drg. no.sked-945 and the description of items are attached in the annexure-1. (procurement as per approved vendors uvam rcf item id:2400031.)

Hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles

Insulating rod assembly for positive & negative support insulator for hitachi tm type hs-15250a to drg.no. skel-4439, alt-1, ref: 1 to 4. note: one sample set should be got approved before effecting bulk supply. (as per uvam id:2101199).

Bend pipe 90 deg 200 nb is 4771 (item no1 of pdf),bend pipe angle45 deg size200 nb end plain thickness 20mm id 200 mm is 4771( item no 2 of pdf),fitting lateral 45 deg thickness 20 mm size 200 nb end plain is 4771 ( item no 3 of pdf)

Inductive shunt assembly (sj) type nr 59 a1 to clw drg. no. 2twd.133.021 alt-3 and confirming to specification no. 4tes.133.001 alt-6 or latest. note:-this item is reserved for clw approved sources as per clw item id: - 2100735.

Green rubber hose pipe for mrb and sctmb [green rubber hose pipe for mrb and sctmb of size id:10 mm, od:20 mm, length- 800 mm. as per clw drg. no- 1209-11.344-046 alt-3 or latest. material is to be procured from clw approved source or their authorised dealers only. clw item id- 2101221.one sample to be got approved before effecting bulk supply.]

Pvc flooring roll 2 x 1850 x 14000 mm, colour as per sample no. nacflg-02, as per drawing/specification: rdso/200 6/cg-12, rev.2 of sept-2023 or latest, with pvc welding electrode dia 4mm=12 mtrs. per roll. item to be procured from rcf approved sources only. rcf item id: 2400073

End frame driving end with air outlet net for traction motor type 6fra 6068 of wap7/ wag9 locos as per ref. no.4 of clw drawing no. 1twd.096.005, alt.11 and clw specification no.4tms.096.068 rev-2, alt-2 or latest. air outlet net as per clw drawing no. 2twd.096.078, alt.3 or latest with the following conditions: 1.the square punch to be 12mm x 12mm as against 11mm x 11mm square. 2.the thickness of the sheet to be 2.5 mm as against 1.6 mm(as per uvam id:2100501)

Capacitor 0.22 mfd+/-10 percent 2000 v of icar italy make type a-11-b- 0.22-210 or epcos make type b 25990-51224-x 007 or similar for wag-9 loco use as per abb id no. hies 309976p0001 (note- this item is reserved for purchase from clw approved source only).

Set of stainless steel pipe fittings as [set of stainless steel pipe fittings as per clw specification no. clw/ms/3/053 alt.21. one set consists of 5 items 8 nos. as per annexure attached. note:- material to be procured from clw approved source or their authorized dealers only as per clw item id 2100097.]