Spiral hose for cable of wap-4 & wag-7 loco size- id-15.2 mm, od-21.1 mm. as per clw drg.no - clw/es/3/0099 alt-g

Inductive shunt assembly (sj) type nr 59 a1 to clw drg. no. 2twd.133.021 alt-3 and confirming to specification no. 4tes.133.001 alt-6 or latest. note:-this item is reserved for clw approved sources as per clw item id: - 2100735.

Stainless steel seamless tube 1-1/2 inch(38.1 mm) o d x 3.40 m m w t as per clw specification no. clw/ms/3/029 with latest revision. material specification astm a-269, tp-304. note: material to be supply in 6 mtr length. (as per uvam id:2100105).

Braided rubber hose pipe id 100x od 110 x l 500 mm with 01 no. worm drive clip, size : 120 mm, as per spec : - is : 444-1987, type- 2, and spec : aisi-304

Pneumatic tool hose rubber (having id-12.5 mm and od-21.5 mm maxm.) two layer rayon braided conforming to specifcation is-446 type-iii minimum bursting pressure 56 kg/cm2, acceptable make: plasser, dunlop, indomaksson, pix, polyhose only.

Screw hex head m 10 x 45 mm to is:1364, s 8.8, with one nut to is: 1364 property class 8, two nos. flat washer to is: 2016 and one spring washer to din 127b is: 3063 for fixation of cable cleat of tm (restricted to be procured from clw approved sources).

Flexible reinforced high pressure rubber hose pipe for vcb having embedded steel wire braiding od- 17.5 mm, id -8 mm, length- 730 mm, end fitting provided with 3/8 inch metallic swivel nut both end. the metallic nut shuld confirm to is-226 g.i. coated sae - 100ri specification :- as per description

1(inch)x1200 hose connection for brake pipe (bp) of emu/ memu / demu to escorts drg. no. 3ep5971/1, alt.07 (or) wsf drg. no.ib70449/ 10(or) ftrtil drg.no. a37080632 (or) kbi drg no. c152942 and conforming to icf document no.icf/sk-10-2- 421, rev.5 and material specification of hose shall conform to sae-100r1at. note: firm should procure, hoses from rdso approved sources only and necessary documents in this regard to be produced along with supply of material.

Set of nipples required for pneumatic pipelines consisting of two items as follows. 1) 1/2 x 1/2 nipples both sides parallel threads as per drg. no. b/trs/pn.eqpt/3/56 or latest. qty/set. = 03nos. 2) 3/4 x 1/2 reducing nipple taper & parallel thread(nom dimension in mm on od: 27 x 21r & nom diameter in mm on id: 20.15 as per drg. no. b/trs/pn.eqpt/3/18, alt a or latest if any. qty/set. = 01no. note: ten sample sets should be got approved before effecting bulk supply.

For complete deion and other details, please refer to tender