Floor end profile,l=2000mm, as per drawing: lw41112, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation.the item should be packed with adequate strength.

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Pin for curve roll of fiat bogie to rcf drg no. lw05124 alt. nil. packing instruction: the item should be collectively packed in wooden box of sufficient strength .

Ring complete (welding joint of this item should be leakage proof)

5.1 make/brand of the item should be embossed in supplied material without hampering the functionality of the item.

Plate spring dia 160 x dia 82 x 6 mm as per drg. no. 1268801 ver. 05r1, item no. 25. packing instruction - pi001 (suitably packed in jute bags)

Trough floor assembly complete for 3 phase memu/dmc coach note:- 1.0 extra channels are to be provided on suitable location of trough floor assembly for lifting/transporation purpose ., as per drawing: em11545 alt b item no. 6 to be supplied as loose in seprate packing, packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any sh

Trochanteric femur nail advanced system one set. spec: (1) 9 mm to 12 mm diameter with inbuilt set screw. (2) should be capable of allowing cannulated screw or blade (one) with same hole in proximal part. (3) end of blade and screw should be porous to allow augmentation with 5 mm distal locking option (two). (4) material should be titanium molybdenum. (complete range of size shape and side specific implant with instrumentation should be available at the time of surgery).[ item code no.:s6155

Tissue valve (bovine) aortic of different sizes (aortic bovine tissue valve with latest anti calcification treatment with adequate size soft and pliable sewing cuff. the valve should have low profile with narrow commisure post giving more space for knot tying with simple one cut release of valve holder). eyery sizes of the valve should be available with the suppling firm and all sizes of the valve to be provided before procedure.[item code no.:s62286 ,ai/2026-27 ]

Top side bearer liner for blcs wagons as per drawing no. wd-15011-s-08, alt.03, item no.17. (note: the dimension of the material should be as per the drawing wd-15011-s-08, alt.3, item no.17 and specification of the material should be confirming to is:3885 pt.1,gr.4 with hardness 380-420 bhn).