Floor end profile,l=2000mm, as per drawing: lw41112, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation.the item should be packed with adequate strength.

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Pin for curve roll of fiat bogie to rcf drg no. lw05124 alt. nil. packing instruction: the item should be collectively packed in wooden box of sufficient strength .

5.1 make/brand of the item should be embossed in supplied material without hampering the functionality of the item.

Hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles

1. machined washer a25 as per drg.no. is:2016-67 table-1, coating as per mdts-057, packing instruction - pi042 as per drg.no. is:2016-67 table-1, coating as per mdts-057 specn: is:2016-67 table-1, coating as per mdts-057 2. set of punched washers for fiat bogie consisting of 03 items. item no.1. punched washer a14 (16nos)- is:2016-1967, material steel to is:2062, coating as per mdts-057.,item no.2. punched washer a18 (32 nos.)- is:2016-1967, material steel to is:2062-2011 reaffirmed 2021, coat

Plate spring dia 160 x dia 82 x 6 mm as per drg. no. 1268801 ver. 05r1, item no. 25. packing instruction - pi001 (suitably packed in jute bags)

Trough floor assembly complete for 3 phase memu/dmc coach note:- 1.0 extra channels are to be provided on suitable location of trough floor assembly for lifting/transporation purpose ., as per drawing: em11545 alt b item no. 6 to be supplied as loose in seprate packing, packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any sh

Trochanteric femur nail advanced system one set. spec: (1) 9 mm to 12 mm diameter with inbuilt set screw. (2) should be capable of allowing cannulated screw or blade (one) with same hole in proximal part. (3) end of blade and screw should be porous to allow augmentation with 5 mm distal locking option (two). (4) material should be titanium molybdenum. (complete range of size shape and side specific implant with instrumentation should be available at the time of surgery).[ item code no.:s6155

Tissue valve (bovine) aortic of different sizes (aortic bovine tissue valve with latest anti calcification treatment with adequate size soft and pliable sewing cuff. the valve should have low profile with narrow commisure post giving more space for knot tying with simple one cut release of valve holder). eyery sizes of the valve should be available with the suppling firm and all sizes of the valve to be provided before procedure.[item code no.:s62286 ,ai/2026-27 ]