Construction of high-level platform from existing rail level platform, dismantling & re-fixing of paver blocks, fixing of chequered tiles at gonpura, construction of protection wall retaining wall and other miscellaneous works in connection with construction of new line from neora to jat dumri of danapur division of east central railway in bihar, india.

Custom bid for services - total 07 quantity of mobilization and demobilization for deployment and erection of boring craft & rig at each borehole location including gst as per sow,custom bid for services - total 280 running meter of boring of minimum 150 mm diameter boreholes up to 10 meters minimum from existing ground level (egl) including setting, dismantling, shifting of rigs & machineries etc including gst as per sow,custom bid for services - total 175 quantity of conducting standard penetration tests as per is 2131 2025 to bored borehole at all depths (interval of 1 dot 5 meters) as required including gst as per sow,custom bid for services - total 175 quantity of disturbed sample (interval of 1 dot 5m) including gst as per sow under geotechnical investigations,custom bid for services - total 91 quantity of undisturbed sample (interval of 3m) including gst as per sow under geotechnical investigations,custom bid for services - total 28 quantity of water sample including gst as per sow under geotechnical i

Ttps mechii tm i unitiii removal of deteriorated cladding over the inner surface of condenser east west cooling water inlet spool piece and outlet bends and rebuild the cladding with special epoxy putties to the required level including cost of

Periodical painting of steel girder bridge of br. no.06- east line (rail viaduct composite girder spans 16x31.6m+23x29.776m+5x31.458m+1x31.708m) at km-08/32-10/24 between stations ppta - phlg and ten(10) spans (span no. 01 to 10) of bridge no. 07(2x64+36x119.6m) at km 10/42-15/24 between stations ppta - phlg of danapur division under dy.ce/brl/hjp.

Fuse,adaptor,adaptor,adaptor 1 by 4,adaptor g5 by 4a,adaptor male,adaptor tee,banjo bolt,bolt 1 inch,cap screw m5,circlip,circlip,circlip item 5 tobe fitted,clamp,clevis right hand thread,clip worm drive,clip worm drive 59 by 83 mm,clip hose,clip jublee,gasket fuel level sensor,grommet 24 mm,kit shim 64 x 57,kit shim 72 x 65,kit shim 79 x 72,relay head light,nut side differential,nut male 1 inch

Electrical work in c/w provision of minimum essential amenities at various stations of bkn div to recoup shortfall in the jurisdiction of den/east/bkn, provision of high level island passenger platform & other passenger amenities between line no. 9 & 10 & extension of platform no.6 at hisar station, raising of pf no. 1 at lahli & bamla station to high level & extension to accommodate full length trains & raising of pf no. 1 at dhana ladanpur halt station & extension

Tiruchchirappalli division : 1). proposed raising of pfs to high level at 12 stations (nsg6- 2, hg3- 9, hg2-1) (13 pfs) in sr.den/east jurisdiction 2).raising of pfs to high level at 8 stations ( nsg6- 5, hg3- 1, hg2- 2) (11pfs) in sr.den/north jurisdiction 3).augmentation of facilities for divyangjan passengers - raising ofexisting ll/ml pfs to hl pf s in tpe (hg-2-pf 1), tom (hg3-pf 2) & mcj (hg-2, pf 1) - electrical general arrangements - works contract.

Level crossing fittings on psc sleepers bg for 60 kg as per rdso drg no. t-4916 (alt-3) including fittings c.i. brackets, c.i. distance bracket, turn bolts, single coil spring washer, plate screw with latest corrigendum issued up to 15 days before the date of opening of tender. list of quantity of one set fittings for level crossing psc sleepers 60 kg as per rdso drg. no. t-4916 (alt-3) is as under : (1 ) c. i. bracket to rdso drg. no. t-4917 and speci. irs:t-10 , qty. 2 nos. (2) c. i. distanc

Level crossing fittings on psc sleepers bg for 60 kg as per rdso drg no. t-4916 (alt-3) including fittings c.i. brackets, c.i. distance bracket, turn bolts, single coil spring washer, plate screw with latest corrigendum issued up to 15 days before the date of opening of tender. list of quantity of one set fittings for level crossing psc sleepers 60 kg as per rdso drg. no. t-4916 (alt-3) is as under : (1 ) c. i. bracket to rdso drg. no. t-4917 and speci. irs:t-10 , qty. 2 nos. (2) c. i. distanc

Drive belt orginal hberg mc,ina nk 35 30,adn-32-30-a-pp5-a 572659,pnu cyl advu-50-15-p-a, festo,apms,aevu-25-5-p-a 156945 p608,dnc-63-40-ppv 163416,dnc-20-40-ppv,pn. cylinder dnc-40-40-ppv 163352,timing belt 630 h 492 , width 25 mm,hex spanner 6 mm to 27 mm,allen key 2.5 mm to 18 mm,dsnu-20-20-ppva 1908291,festo cassette cpv10-m1h-5js-m7 161415,pn cyl. smc mgpm25tf-20,pn cyl. smc ecq2wf32-10dm,pn cyl.smc cq2b20-10s,belt hpd 525 5m,1778 14 m timing belt width 40 mm,power grip 210l timing belt width-10mm,air hose pipe id - 16 mm od - 19 to 22 m,air hose pipe id - 25 mm od - 28 to 32 m,air hose pipe id - 0.75 inch od - 42 mm,air hose pipe id - 1.5 inch od - 42to50,air hose pipe id - 0.5 inch od - 15to18,pipe cutter pvc pu ratchet cutting actio,timingbelt_380 h 100_epp,timing belt - 360 t5 w-10 mm, teeth 72,a 48 13 x 1220 li,htd 400 5m, 8 mm width,small sprit level bottle,v belt a 83,a 13 x 1220 li,a32 13 x 815 li,v belt a 56,v belt b 58,v belt b-54,v belt a 43 new wing,v belt b 52,timing belt 2800 8m,tim