226 Feeding Machine In India 2026

Provision of ring protection for 24v dc (external) supply and 110v ac supply for track feed battery charger at station yard, along with provision of power supply redundancy as per tan for bpac system 1 and system 2 in the mim-subr section, and replacement of overaged or worn-out point machines over ljn division.

For complete deion and other details, please refer to tender

Tender EMD: 2.26 Lakh

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: February 05, 2024 23:34

Place: Gorakhpur

Due Date: Expired 967 days ago

Repairing 02 nos feed chain sprocket, sprocket fork, and 02 nos. motor drive sprocket and replacement of broken and cracked glass and repairing of operator seat and back rest of idm 30 drill sl. no. 201506863 at antst-jg ocp, lodna area, bccl.

1. oval pin hole of feed chain sprocket and motor drive sprocket welding by suitable electrode. 2. after welding the hole machining as per pin size.

Tender EMD: 626

Organisation: Coal India Limited (CIL)

Start Date: July 26, 2023 15:30

Place: Office of area manager(excvn), lodna area

Due Date: Expired 1178 days ago

Engagement of one dozer machine (beml make model no bd-155 or equivalent with operator and lube oil on hourly rental basis

Engagement of one dozer machine (beml make model no bd-155 or equivalent or above capacity) with operator and lube oil etc. (excluding sel) on hourly rental basis for compacting/feeding/shifting etc. of coal in coal yard of chp btps(2x210 mw), ner

Tender EMD: 30586

Tender Fee: 1180

Organisation: UP Rajya Vidyut Utpadan Nigam Ltd | State Govt. and UT

Start Date: November 29, 2025 21:30

Place: Ptpp parichha

Due Date: Expired 307 days ago

Mig/mag welding machine with self adjusting arcs (specs :output current of 400 a at 60 percentage and 309 a at 100 percentage duty cycle with input voltage 415 /- 15 percentage volt, 3 phase, 50 hz ac supply, efficiency 86 percentage or better, power factor 0.9 or better, protection class ip21, open circuit voltage 16-34 volts suitable for wire diameter 0.8- 1.6 mm and wire feed speed 1-25 mtrs. per minute, weight 50 kgs approx)

For complete deion and other details, please refer to tender

Tender EMD: 0

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: November 28, 2024 21:59

Place: Guwahati

Due Date: Expired 683 days ago

Kmc/dg(m)/asp/gg/m-20/2024-25

Contractual operation of plastic feeding machine in connection with hot mix plant under asphaltum goragacha.

Tender EMD: 10000

Tender Fee: 0

Organisation: KOLKATA MUNICIPAL CORPORATION | State Govt. and UT

Start Date: September 11, 2024 22:30

Place: Goragacha

Due Date: Expired 762 days ago

Badminton racket match quality,badminton racket pratice quality,badminton shuttle cock feather,badminton shuttle cock nylon made,badminton racket grip,badminton net,badminton pole movable,badminton shuttle cock feeding machine,badminton synthetic flooring,badminton wooden flooring,badminton gutt,badminton referee chair,boxing gloves 10 oz,boxing gloves 12 oz,boxing gloves 16 oz,boxing head guard,boxing punching bag,boxing punching gloves,boxing punching pad,boxing abdominal guard for men,boxing chest guard for women,boxing bandage,boxing gum shield,boxing brass bell,boxing speed ball with stand,boxing dummy,boxing boxing timer,boxing ring cover canvas,boxing ring complete set,boxing coach vest chest punching pad,boxing jab stick,boxing target paddle pad,boxing for protector groin protector,boxing wall pad wall punching pad,boxing reflex ball focus,boxing suit case shield,chess board with coins,chess clock,chess demonstration board,chess chess table,hockey stick,hockey ball,hockey shin guard,hockey goal keeper

Organisation: Directorate of Education | Education Department Delhi

Start Date: October 05, 2026 23:15

Due Date: Expired 3 days ago

Different type of engine bearing model 10 different types on board,different type of piston model 5 different types on board,engineers stethocope,fuel feed pump for diesel,fuel injection pump,injector two types multi hole type and pintle type,injector testing machine hand tester,oil pump for dismentling and assembling,radiator cut section cross flow,radiator cut section down flow,radiator pressure cap,spark lighter,spanner for sparking plug,timing lighter,turbocharger cut sectional view,lifter valve spring,valve spring compressor universal,automotive water pump for dismentaling and assembly

Organisation: Directorate of Employment & Training | Labour and Employment Department Gujarat

Start Date: September 30, 2026 14:28

Due Date: Expired 2 days ago

Tn-3088/chp

Manufacturing, machining and shrink fitting of rider rings and driven sprocket on old spiders of feed and discharge end of rotary breaker or primary crusher, at chp, stps, suratgarh.

Tender EMD: 88800

Tender Fee: 1090

Organisation: RRVUN - CMD | State Govt. and UT

Start Date: December 30, 2024 14:30

Place: Room no. 306 service bulding stps suratgarh

Due Date: Expired 646 days ago

Advanced life support skill trainer manikin,airways management trainer manikin,adult cpr training half torso manikin with cardiac feedback,adult cpr training full manikin with cardiac feed back,infant basci cpr training manikin full troso with cardiac feedback,anatomical torso traua manneuin with minimum 5 skin,anatomical neck trauma manikin,adult phlebotomy iv access trainer arm,pediatric phlebotomy iv access trainer arm,intrasseous access training adult,intrasseous access training setpediatric,central iv manikin with internal jugugular and subclavain,aed trainer,ecg simulator and rhythm generator,monitor defibrillator paper with aed,monitor defirillator capable of defibrillation,airway foreign trainer manikin,anatomic full spine model,portable ultrasouond machine,infusion syringe pump for 10 and 20 and 50ml,post partujm haemorrhage control training manikin

Organisation: Dean and Principal SCB Medical College Cuttack | Health and Family Welfare Department Odisha

Start Date: October 07, 2026 15:27

Due Date: Expired 1 days ago

Mfg. of rider ring and its shrink fitting on spider of primary crusher of chp atps anpara

Manufacturing and machining of rider rings and their shrink fitting on old spiders and drilling new holes and shifting the stiffener on feed and reject end spider of primary crusher of chp, atps, anpara.

Tender EMD: 65000

Tender Fee: 1180

Organisation: UP Rajya Vidyut Utpadan Nigam Ltd | State Govt. and UT

Start Date: July 28, 2025 15:30

Place: Chp atps anpara

Due Date: Expired 421 days ago

Results for: Feeding Machine

For complete deion and other details, please refer to tender

Repairing 02 nos feed chain sprocket, sprocket fork, and 02 nos. motor drive sprocket and replacement of broken and cracked glass and repairing of operator seat and back rest of idm 30 drill sl. no. 201506863 at antst-jg ocp, lodna area, bccl.

1. oval pin hole of feed chain sprocket and motor drive sprocket welding by suitable electrode. 2. after welding the hole machining as per pin size.

Engagement of one dozer machine (beml make model no bd-155 or equivalent with operator and lube oil on hourly rental basis

Engagement of one dozer machine (beml make model no bd-155 or equivalent or above capacity) with operator and lube oil etc. (excluding sel) on hourly rental basis for compacting/feeding/shifting etc. of coal in coal yard of chp btps(2x210 mw), ner

For complete deion and other details, please refer to tender

Kmc/dg(m)/asp/gg/m-20/2024-25

Contractual operation of plastic feeding machine in connection with hot mix plant under asphaltum goragacha.

Tn-3088/chp

Manufacturing, machining and shrink fitting of rider rings and driven sprocket on old spiders of feed and discharge end of rotary breaker or primary crusher, at chp, stps, suratgarh.

Mfg. of rider ring and its shrink fitting on spider of primary crusher of chp atps anpara

Manufacturing and machining of rider rings and their shrink fitting on old spiders and drilling new holes and shifting the stiffener on feed and reject end spider of primary crusher of chp, atps, anpara.

Get new Feeding Machine tenders

Need support responding to this opportunity?