108 Angle Fabrication In India 2026

Fabrication and erection of underflow tray, dismantle and new plate (1600 mm x 10 mm) and platform bracing angle 02 side supporting pipe fitting in unit no. 209 of sec-i in hms section at kathara washery

Tender EMD: 2138

Organisation: Coal India Limited (CIL)

Start Date: June 21, 2023 16:30

Place: Office of project office, kathara washery

Due Date: Expired 1206 days ago

Fabrication and erection/shifting and changing of vibrator tray and lining plate fitting of unit no. 109 and tail drum structure and its channel angle plate etc. of unit no. 180 in raw coal section of kathara washery

Tender EMD: 4300

Tender Fee: 0

Organisation: Central Coalfields Limited | Public Sector Undertakings

Start Date: June 13, 2024 16:30

Place: Kathara washery

Due Date: Expired 847 days ago

Set of items required for fabrication works in ac electric locomotives consisting of 04 items as follows. 1) c- channel size: 100 x 50 x 6mm & each channel length = 20 feets. qty/set. = 20 nos. 2) equal l- angle size: 50 x 50 x 6mm & each l-angle length = 20 feets. qty/set. = 30 nos. 3) equal l- angle size: 40 x 40 x 4mm & each l-angle length = 20 feets. qty/set. = 30 nos. 4) hex head bolt full threaded size: m14 x 55mm, grade: 8.8 as per is: 1364(part-2) along with suitable one

For complete deion and other details, please refer to tender

Tender EMD: 0

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: August 05, 2025 15:13

Place: Secunderabad

Due Date: Expired 412 days ago

Provision earthing arrangement for different shops, over head structure and sub station and replacement of old over head wired &amp angle type dsl by new type dsl with sleeve for mg inspection and fabrication shop of eot crane at workshop./izzatnagar.

For complete deion and other details, please refer to tender

🔧 Electrical Earthing Project for Ministry of Railways 🌩️ The Ministry of Railways, Central Government, invites tenders for the provision of earthing arrangements for various shops, overhead structures, and substations, as well as the replacement of old DSLs with new ones at the MG inspection and Fabrication shop of EOT cranes at the workshop in Gorakhpur. 📅 Submission Deadline: June 21, 2024, 3:30 PM Tender Fee: INR 0 EMD: INR 19400 Interested bidders should review the complete tender document for detailed specifications, project scope, and submission guidelines. This project is a critical part of enhancing safety and reliability in the railways' infrastructure. Keywords: Electrical Earthing, Ministry of Railways, Tender, Central Govt. Ministry/Department, Gorakhpur, DSL Replacement, EOT Crane, Workshop

Tender EMD: 19400

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: May 20, 2024 22:08

Place: Gorakhpur

Due Date: Expired 850 days ago

Fabrication of 33 kv v-cross arm, top clamp, d.c. cross arms 5 feet centre, single pole cut point channel, bracing/support angle for 5 feet , h.beam back clamps and other items required for 33 kv dharamkundi feeder bifurcation work

Tender EMD: 6500

Tender Fee: 885

Organisation: Madhya Pradesh Madhya Kshetra Vidyut Vitaran Company Limited | State Govt. and UT

Start Date: February 28, 2024 00:00

Place: Narmadapuram

Due Date: Expired 959 days ago

Fabrication of 33 kv v-cross arm, top clamp, dc cross arms 5 feet center to center, single pole cut point channel, bracing/support angle for 5 feet, h.beam back clamps flat and other items required for 33 kv sandiya and sankhani work

Tender EMD: 8300

Tender Fee: 885

Organisation: Madhya Pradesh Madhya Kshetra Vidyut Vitaran Company Limited | State Govt. and UT

Start Date: February 28, 2024 00:00

Place: Pipariya

Due Date: Expired 959 days ago

Repairing, fabrication and erection of screens tray, mounting base and strengthening of supporting structure by using 25 meters of 8 mm ms plate, joist 15 meters (300mm), channel 21 meters (150 mm x 150 mm) and angle 15 meters (65 mm x 65 mm x 6 mm

Repairing, fabrication and erection of screens tray, mounting base and strengthening of supporting structure by using 25 meters of 8 mm ms plate, joist 15 meters (300mm), channel 21 meters (150 mm x 150 mm) and angle 15 meters (65 mm x 65 mm x 6

Tender EMD: 1997

Organisation: Coal India Limited (CIL)

Start Date: June 23, 2023 16:30

Place: Office of project officer, kathara washery

Due Date: Expired 1204 days ago

Fabrication of tension plate 04 nos. along with tension bolt to top tumbler of 208 unit no. middling be and replacement of damaged/worn-out discharge chute liner plate along with mother base plate and base angle of 222,223,207 and 208 b/e of k/w

Tender EMD: 5800

Tender Fee: 0

Organisation: Central Coalfields Limited | Public Sector Undertakings

Start Date: September 08, 2025 15:30

Place: Kedla washery

Due Date: Expired 396 days ago

Fabrication and supply of 60 kg 1 in 8.5 , cms obtuse angle crossings for diamond on psc sleepers conforming to rdso drg. no t-6495, alt. no. 1 or latest alteration and as per specification irs t-29( revised -2023 ) for cast manganese steel (latest alteration) and all fittings as listed drawing excluding fish plates , fish bolts, gr pads, metal liner, gfn liner, erc.

For complete deion and other details, please refer to tender

Tender EMD: 5.64 Lakh

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: January 23, 2024 17:21

Place: Kolkata

Due Date: Expired 969 days ago

Supply,erection, testing and commissioning of three pieces non-linear resister type lightning arrester confirming to is:3070(pat.1):1974,suitable for 3 wire 33kv over head lines rated voltage of 30 kv(rms)/42 kv(max) with a nominal discharge current rating of 10 ka,complete with all accessories including supply fabrication and erection structure of angle iron 50x50x6 mmand channels of 100x50x6 mm complete with all fixing arrangement.

For complete deion and other details, please refer to tender

Tender EMD: 0

Tender Fee: 0

Organisation: Ministry of Railways | Central Govt. Ministry/Department

Start Date: December 27, 2024 23:29

Place: Hazipur

Due Date: Expired 650 days ago

Results for: Angle Fabrication

Fabrication and erection of underflow tray, dismantle and new plate (1600 mm x 10 mm) and platform bracing angle 02 side supporting pipe fitting in unit no. 209 of sec-i in hms section at kathara washery

Fabrication and erection of underflow tray, dismantle and new plate (1600 mm x 10 mm) and platform bracing angle 02 side supporting pipe fitting in unit no. 209 of sec-i in hms section at kathara washery

Fabrication and erection/shifting and changing of vibrator tray and lining plate fitting of unit no. 109 and tail drum structure and its channel angle plate etc. of unit no. 180 in raw coal section of kathara washery

Fabrication and erection/shifting and changing of vibrator tray and lining plate fitting of unit no. 109 and tail drum structure and its channel angle plate etc. of unit no. 180 in raw coal section of kathara washery

For complete deion and other details, please refer to tender

Provision earthing arrangement for different shops, over head structure and sub station and replacement of old over head wired &amp angle type dsl by new type dsl with sleeve for mg inspection and fabrication shop of eot crane at workshop./izzatnagar.

For complete deion and other details, please refer to tender

Fabrication of 33 kv v-cross arm, top clamp, d.c. cross arms 5 feet centre, single pole cut point channel, bracing/support angle for 5 feet , h.beam back clamps and other items required for 33 kv dharamkundi feeder bifurcation work

Fabrication of 33 kv v-cross arm, top clamp, d.c. cross arms 5 feet centre, single pole cut point channel, bracing/support angle for 5 feet , h.beam back clamps and other items required for 33 kv dharamkundi feeder bifurcation work

Fabrication of 33 kv v-cross arm, top clamp, dc cross arms 5 feet center to center, single pole cut point channel, bracing/support angle for 5 feet, h.beam back clamps flat and other items required for 33 kv sandiya and sankhani work

Fabrication of 33 kv v-cross arm, top clamp, dc cross arms 5 feet center to center, single pole cut point channel, bracing/support angle for 5 feet, h.beam back clamps flat and other items required for 33 kv sandiya and sankhani work

Repairing, fabrication and erection of screens tray, mounting base and strengthening of supporting structure by using 25 meters of 8 mm ms plate, joist 15 meters (300mm), channel 21 meters (150 mm x 150 mm) and angle 15 meters (65 mm x 65 mm x 6 mm

Repairing, fabrication and erection of screens tray, mounting base and strengthening of supporting structure by using 25 meters of 8 mm ms plate, joist 15 meters (300mm), channel 21 meters (150 mm x 150 mm) and angle 15 meters (65 mm x 65 mm x 6

Fabrication of tension plate 04 nos. along with tension bolt to top tumbler of 208 unit no. middling be and replacement of damaged/worn-out discharge chute liner plate along with mother base plate and base angle of 222,223,207 and 208 b/e of k/w

Fabrication of tension plate 04 nos. along with tension bolt to top tumbler of 208 unit no. middling be and replacement of damaged/worn-out discharge chute liner plate along with mother base plate and base angle of 222,223,207 and 208 b/e of k/w

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender

Need support responding to this opportunity?

Get customized tender Recommendations for your Enterprise