Hiring of services for installation of indirect heater including fabrication and hooking up of flowline manifold with the heater laying of 100 mm nb flowlines and 50 mm nb fuel lines to the heaters at different locations of oils operational areas

Cast basalt lined m.s. pipes 406 mm o.d with standard length of 6 m with single end flanged end and double end flanged end - 2 items

Mtps i mill plant unit i fabrication of various length of dia 40 nb cooling water pipe line with flanges and assembling in the cooler cover of mill 1a to 1f and dismantling of seal air fan motor and overhauling reassembling setting the alignment

Bamboo ladders 24 feet long having 2.5 to 3 dia at bottom and 1.5 to 2.5 dia at the top. at least the cross pieces ie 16 nos. steps should be at distance of 17 and bamboo ladders should be tightened with g.i. wires 16 swg at least 6 places the

Providing and laying of water supply line of 100mm dia line at different locations and making connection of 900 mm dia with gmda water connection and submersible motors 12.5 hp, cable, panels, ms pipes etc. in ward no.26 ( new ward) under mcg.

Supply and installation of 04 nos. jetting pipe with joint flange both side and 2 nos. sluice valve for 01 no. 1000 gpm pontoon pump at quarry no. 06 of religara ocp

Drilling of 150/125/115 mm dia 120 mtr. deep telescopic tube well with installation of hand pump and construction of plateform in different villages of block ghughri district mandla (nos. of tube wells 55 nos)..

Laying of trenchless 1000 mm dia np-4 pipe and rcc jacking pipe with ms coller across ring road on drain no. 12 and connection of drain no. 12 and 12a near i.p. metro station under sub division-3 of division c and nd- roads, new delhi. 2nd recall

Shifting, laying and fitting of different dia. pipeline with flange welding and dismantling of old ms pipeline as well as dismantling and shifting of pumps at different sumps, delivery/ suction pipe extension or shortening with float etc

Flat type heavy duty bi-metallic clamp made of brass and aluminum it should have brass pad 50x50x10 mm with16 mm hole at center and aluminum on other side size 175x70x10 mm. having 12 nos. g.i. nut and bolt size7/15x5 mm with plain and spring washe