Composite hoses 75mmx8.0 mtrs long (both end 3 flanges),composite hose 75 mm x 8.0 mtrs. long both end flanges(one end 3&4 and other end 3 )

High pressure hose pipe size 5/16 inch, length15 meters long with connector (both sides end fittings) end fittings with o ring type straight with 27 a/f nut both sides suitable for water jets.

Supply of air bellow duct set, each set of air bellow ducts consisting of : 01 no of supply air bellow duct, 02 nos. of fresh air bellow ducts & 2 nos return air bellow ducts. the bellow ducts should be made of meta aramid/para aramid fabric with silicon rubber coating on both sides and the metallic frames at both ends of the ducts i.e. rmpu side & coach shell side, shall be as per rdso specification no. rdso/pe/spec/ac/0197-2020 (rev.-1) & rdso drawing no. rdso/pe/sk/ac/0069-2004 (rev.3), sui

Heavy duty shunt fitted with lug on both side. lug hole 12 mm, size 1200mm long as per mgs drg. no.- sf-4-2009-19

One set consists 02 items (1) top flange as per rcf drg. no. le11284 alt. g .(2) top flange as per rcf drg. no. le11285 alt. h . material of both items must be ferritic stainless steel to rdso spec. ck-201 grade x2crni12.

Hose connection 3/8 x 1600 mm long to icf drg no icf/sk-3-5-517,alt-u/18 item no 2 .both end should be swivel end with three nylon washers to icf drg no icf/sk-3-5-263, alt-nil, item no 3.

Rail jumper with clamps at both ends 13 mtr long complete as per rdso drg. no.re/33/p-500. ( railclamp made of al.bronze is: 3091/1999 and pvc copper cable size: 248/0.45mm ) make:- pec, sdu,sst, im or equivalent.

Pipe 32 n.b. with flanges & sockets (welded assembly) for freight stock to rdso s drg. no. wd-80007-s-11, alt-12, item no. 2, 12 & 13. flanges and socket to rdso drg. no. wd-83062-s-07, alt.6, items 2 & 3. other technical requirements confirming to specification no. 04-abr-2019. material specification of pipes as under, pipes 32 nb:-seamless to is: 1239 (part-i):2004 with amendment 1 to 6, heavy grade or astm a-106 gr.a. socket & flange:-is: 2062-2011, amendment 1 of nov.2012, gr. e 250 a for

Kirschner wire 250 mm long x 1pnt0 mm dia both ends trocar point,kirschner wire 250 mm long x 1pnt5 mm dia both ends trocar point,kirschner wire 250 mm long x 2pnt0 mm dia both ends trocar point,kirschner wire 15cm x 2mm both ends trocar,headless compression screw 3pnt0mm pnttitaniumpnt,headless compression screwpnt 2pnt4 mm short thread pnttitaniumpnt,olecranon platepnt anatomical 3pnt5 mm right or left complete construct with 6 locking and 4 cortical screws pnttitaniumpnt,distal radius volar locking plate complete construct with 6 locking and 3 cortical screws titanium,clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws left or right side stainless steel 316l,clavicular anatomical plate 3pnt5 mm complete construct for left or right side with 6 cortical screws pntss 316lpnt,olecranon platepnt anatomical 3pnt5 mm right or left complete construct with 6 locking and 4 cortical screws pntstainless steel 316lpnt,quotproximal tibial lateral periarticular locking plate system

Set of nipples required for pneumatic pipelines consisting of two items as follows. 1) 1/2 x 1/2 nipples both sides parallel threads as per drg. no. b/trs/pn.eqpt/3/56 or latest. qty/set. = 03nos. 2) 3/4 x 1/2 reducing nipple taper & parallel thread(nom dimension in mm on od: 27 x 21r & nom diameter in mm on id: 20.15 as per drg. no. b/trs/pn.eqpt/3/18, alt a or latest if any. qty/set. = 01no. note: ten sample sets should be got approved before effecting bulk supply.