1743 3 Phase Motor Starter In India 2026

Nail file,neck tray,re-bonding boards,vacuum suction,divider spring,growler,function generator,immersion heater,inverter 1 kva,plane smoothing,soldering iron copper bit,cut out relays,,reverse current relays,motor ac single phase 230 v,transformer single phase, 1 kva, 240 and 415v 50 hz core type, air cooled .,stepper motor with digital control,shaded pole motor fractional hp,,wiring board on stand 3 meters x 1meter,hammer extractor type,caliper inside spring,drill hand brace,ac starter resistance type starter,star delta strater soft starter,soldering iron,led lighting system measurement of power, voltage, current, power factor and light output performance of different lighting products like led,,ventilation system,spanners ,clyburn,measuring tape,thread cutter,hammer sledge,multi angle magnetic clamp set,anvil 24 sq. inches working area with stand,solid state solar base single phase energy meter,wall jumper octagonal,coil winding machine,earth copper plate,safety belt with,rubber gloves,solar charge controll

Organisation: Directorate of Employment & Training | Labour and Employment Department Gujarat

Start Date: October 07, 2026 16:32

Due Date: 4 days left

3 phase induction blower motor, suitable for use in lhb type rmpu ac coaches, as per rdso specification no. rdso/pe/spec/ac/0089-2008 (rev.-0) with amendment no. 1 & 2

Organisation: Ministry of Railways

Start Date: October 13, 2026 16:02

Due Date: 2 days left

Complete repairing/rewinding of 3 phase marathon make induction motor, 6.6 kv, 750 kw, 1492 rpm, sl. no. 3f660895/2 failed during operation in the deep mine pumping zone of rajmahal ocp.

Tender EMD: 11000

Organisation: Eastern Coalfields Limited | ECL_Rajmahal area

Start Date: October 09, 2026 22:30

Place: Rajmahal area

Due Date: 2 days left

Submersible pump motor set capacity 20 hp , isi marked motor 415 volt,3 phase,50 hz, 4 star rating ,discharge capacity 900-1400 lpm , discharge head 55-60 meter. nominal speed 2900 rpm,5 stage or multistage, bore well 200 mm suitable discharge pipe 100 mm, motor totally enclosed copper wound squirrel induction type, water cooled & water lubricated.

Organisation: Ministry of Railways

Start Date: October 16, 2026 16:47

Due Date: 16 days left

Blower for oil cooling unit with casing including 30 kw motor (wound with corona resistance wire) to rdso specification no. rdso/2016/el/spec/0123 rev 1 or latest and clw drawing no. clw/es/3/sk-3/0647 alt b or latest for 3 phase locomotive. clw approved sources only.

Organisation: Ministry of Railways

Start Date: September 30, 2026 17:33

Due Date: 1 days left

Replacement by way of providing, fitting, installation, testing and commissioning of 10 cusec discharge 18 m head hc pump (raw water) compatible with existing 3-phase induction motor with allied works at lis manda-i

Tender EMD: 10800

Tender Fee: 500

Organisation: I and FC | CE- I and FC Jammu | Mechanical I and FC Circle Jammu | MID Akh-Now

Start Date: October 16, 2026 23:30

Place: Jammu and kashmir, lis manda-i

Due Date: 18 days left

Complete repairing and overhauling of one (01) no. submersible starter 550 volt 175 h.p.sl. no.48 local id. no. bar/sub/str/04 sb make and rewinding of auto transformer 3 phase at 6 pit bararee colliery of amal.joyrampur colliery under lodna area.

Tender EMD: 1190

Organisation: Bharat Coking Coal Limited | BCCL_LODNA AREA

Start Date: October 15, 2026 23:30

Place: Lodna area

Due Date: 9 days left

Set of resistance elements consists of 02 nos of resistance elements for temperature sensor of 3 phase traction motor type 6fra6068 as per abb doc.no. 3ehm 311882 alt-4, conforming to clw specn. no. 4tms.096.087 rev-1

Organisation: Ministry of Railways

Start Date: August 31, 2026 16:00

Due Date: 18 days left

45 w led street light fittings pin type,45 watts led street light fittings,constant current led driver is 15885, r-71012530,4 core x 50 sqmm pvc insulated ug aluminium armoured cable,4 core x 25 sqmm pvc insulated ug aluminium armoured cable,2 core x 10 sqmm pvc insulated ug aluminium armoured cable 90 m coil,4 core x 4 sqmm pvc insulated copper cable 100 m coil,16 sqmm. 3.5 core aluminum armored cable,16 sqmm. 4 core unarmored copper cable,120 sqmm. trailing copper cable 4 core,25 sqmm. welding copper cable, 250amps.,10 hp star delta motor starter 3 wire,7.5 hp star delta motor starter 3 wire,d.o.l starter for 5 hp 3 phase electric water pump,star-delta er for 25 hp 3 phase electric water pump,6 liter 5 star geyser,12 v, 200 ah battery for invertor,18 watts solar gate light,12 watts solar compound wall light,6 watts solar wall washer light up and dowm,9 watts 18 m, 12 mm width tiranga rope light,250 amps pcc control panel, 415 v,750 va wall mounted type ups,smps with battery for intercom system,universa

Organisation: Andaman Lakshadweep Harbour Works (ALHW) | NA

Start Date: September 30, 2026 16:17

Due Date: 3 days left

Growler tester for 3-phase induction mot [growler tester for 3-phase induction motor, 230v, 50 hz) dual magnetization yoke with standard accessories (1) thermacol moulded carry case: 1 no. (2) astm test block: 1 no. (3) pie gauge: 01 no. (4) puffer bulb for powder spray: 1 no. (5) dry magnetic powder black water base: 1kg. (6) operational manual: 1 no. note: the firm will submit the warranty certificate, test certificate and calibration certificate along with the material.]

Organisation: Ministry of Railways

Start Date: October 16, 2026 17:39

Due Date: 30 days left

Results for: 3 Phase Motor Starter

3 phase induction blower motor, suitable for use in lhb type rmpu ac coaches, as per rdso specification no. rdso/pe/spec/ac/0089-2008 (rev.-0) with amendment no. 1 & 2

3 phase induction blower motor, suitable for use in lhb type rmpu ac coaches, as per rdso specification no. rdso/pe/spec/ac/0089-2008 (rev.-0) with amendment no. 1 & 2

Complete repairing/rewinding of 3 phase marathon make induction motor, 6.6 kv, 750 kw, 1492 rpm, sl. no. 3f660895/2 failed during operation in the deep mine pumping zone of rajmahal ocp.

Complete repairing/rewinding of 3 phase marathon make induction motor, 6.6 kv, 750 kw, 1492 rpm, sl. no. 3f660895/2 failed during operation in the deep mine pumping zone of rajmahal ocp.

Blower for oil cooling unit with casing including 30 kw motor (wound with corona resistance wire) to rdso specification no. rdso/2016/el/spec/0123 rev 1 or latest and clw drawing no. clw/es/3/sk-3/0647 alt b or latest for 3 phase locomotive. clw approved sources only.

Blower for oil cooling unit with casing including 30 kw motor (wound with corona resistance wire) to rdso specification no. rdso/2016/el/spec/0123 rev 1 or latest and clw drawing no. clw/es/3/sk-3/0647 alt b or latest for 3 phase locomotive. clw approved sources only.

Replacement by way of providing, fitting, installation, testing and commissioning of 10 cusec discharge 18 m head hc pump (raw water) compatible with existing 3-phase induction motor with allied works at lis manda-i

Replacement by way of providing, fitting, installation, testing and commissioning of 10 cusec discharge 18 m head hc pump (raw water) compatible with existing 3-phase induction motor with allied works at lis manda-i

Complete repairing and overhauling of one (01) no. submersible starter 550 volt 175 h.p.sl. no.48 local id. no. bar/sub/str/04 sb make and rewinding of auto transformer 3 phase at 6 pit bararee colliery of amal.joyrampur colliery under lodna area.

Complete repairing and overhauling of one (01) no. submersible starter 550 volt 175 h.p.sl. no.48 local id. no. bar/sub/str/04 sb make and rewinding of auto transformer 3 phase at 6 pit bararee colliery of amal.joyrampur colliery under lodna area.

Set of resistance elements consists of 02 nos of resistance elements for temperature sensor of 3 phase traction motor type 6fra6068 as per abb doc.no. 3ehm 311882 alt-4, conforming to clw specn. no. 4tms.096.087 rev-1

Set of resistance elements consists of 02 nos of resistance elements for temperature sensor of 3 phase traction motor type 6fra6068 as per abb doc.no. 3ehm 311882 alt-4, conforming to clw specn. no. 4tms.096.087 rev-1

Need support responding to this opportunity?

Get customized tender Recommendations for your Enterprise