Supply of 250nb 90 degree bend both side flanged ends suitable for ash slurry pumps of unit i and ii

High pressure hose pipe size 5/16 inch, length15 meters long with connector (both sides end fittings) end fittings with o ring type straight with 27 a/f nut both sides suitable for water jets.

Supply of transverse cross bond made of ms flat of size 40?6 mm, suitable for glued joints in crossover track-circuited areas, as per rdso drawing no. eti/ohe/g/05251, with holes at both ends and complete with gi bolts of size 16?50?38 mm along with nuts, spring washers and flat washers; and cross/transverse bond and special bond fabricated from ms (mild steel), complete with ms flats duly painted with one coat of red oxide primer and finished with black paint, suitable for ohe bonding and ret

Wooden slate for stacker,ms roller for stacker,carriage bolt for stacker with nut and washer complete,uhm slate for conveyor,counter sunk screw complete,uhm strip 50x6 mtr,uhm strip screw complete,split pin suitable for conveyor,sprocket 9 teeth,return roller,return roller shaft,dye pressed strip for stacker,driving chain for stacker pitch 1 inch dia 16mm

Supply and laying of 2 inch gi class c pipeline,supply and fixing of 2 inch gi elbow,supply and fixing of 2 inch ms ball valve,supply and fixing of 2 inch ms flange,supply and fixing of 2 inch gasket,supply and fixing 5 by 8 inch x 2.5 inch nut bolt,supply and fixing of 0.5 inch both side threaded ms coupling,supply and fixing 0.5 inch ms ball valve,supply and fixing of 0.5 inch gi hydraulic nipple,supply and fixing of 2 inch gi u-clamp with double nut washer

500a, 750v, jumper plug assembly to spec. rdso/pe/spec/ac/0177 (rev-0)-2013 or latest, assembled jumper plugs at both ends, duly crimped with cables and covered with flexible polyamide conduit nw70 length 1650 mm to rdso/pe/spec/ac/0138-2009 (rev-1) or latest and its fittings/accessories. as per icf drawing icf/sk3-7-1-095 alt b or latest.

3-pin socket, 6 amps, 250v ac, 2 modules without shutter, color: white suitable to fit in salzer make switch plate assembly for non-ac coaches conforming to is:1293-2019 or latest with isi mark. note: (1) sample to be supplied for approval before bulk supply. (2) fixing screw and nut has to be supplied along with socket

Bracket fan 225 mm sweep, 110 v ac conforming to rdso specification no. is:6680-92 with annexure h (december2005) for rc fan issued by rdso vide lr. no. qe/6.5.1 dated 10.03.2006. the fan base, motor body and bracket shall conform to icf drg.no. icf/sk-7-6-179 with elegant, compact, lightweight aluminium body, anti-corrosive and frp blade. the fan shall have ball bearings at both the ends with skf/nbf ball bearing. the guard shall be crashworthy design to drg.no. icf/sk 7-6-158 col.ii alt. g.

Supply of air bellow duct set, each set of air bellow ducts consisting of : 01 no of supply air bellow duct, 02 nos. of fresh air bellow ducts & 2 nos return air bellow ducts. the bellow ducts should be made of meta aramid/para aramid fabric with silicon rubber coating on both sides and the metallic frames at both ends of the ducts i.e. rmpu side & coach shell side, shall be as per rdso specification no. rdso/pe/spec/ac/0197-2020 (rev.-1) & rdso drawing no. rdso/pe/sk/ac/0069-2004 (rev.3), sui

13 pin uic coupler plug assembly with contact pin consists of i .3 meters cables and plyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 reva. note ulc plug as per clw drawing no. clw/es/3/sk- 4/0047/e similar to schatbau part no. ulc st 13 p eo d2 and conduit as eer rdso specification rdso/pe/spec/ac-0138-2009 reva or latest.