Similar Tenders

• Set of spares for hrc fuse unit 6 amps, to use on 25 kv ac elec locos. each consists of the following as per the clw specn no.clw/es/f8/alt-c or with latest alteration. s.no. (1) fuse base qty/1 no. (2) fuse link qty/1 no. (3) fuse carrier qty/2 nos. (4) gauge piece qty/1 no. (5) collar ring qty/1 no.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Secunderabad Closes 22/11/2024

  View tender →

• Fabrication & supply of 12 layer pcb as per name : ecs2520 pcb pcb size : 244 x 144 x 1.6mm other important technical information minimum trace width: 4-6mil minimum through hole dia:0.3m std:ipc 6012 e-class 3,qap 121 processor: smobc:enig:bbt material: fr4-tg-170 test report required a. microsection report b. enig report technical specifications mentioned in annexure-t1 to ecil-hyderabad. qty: 30no s.

  Electronics Corporation of India Limited | Public Sector Undertakings · HYDERABAD Closes 12/08/2025

  View tender →

• Set of spares for hrc fuse unit 35 amps, to use on 25 kv ac elec.locos. each consists of the following as per the clw specn no.clw/es/f8 alt e or with latest alteration and confirming to els/bza drawing no.b/trs/lgt/4/51. each consisting of the following items.1 ) fuse base -qty-1 no, 2 ) fuse link -qty - 1 no, 3) fuse carrier -qty - 2 nos, 4 ) gauge piece percent u2013qty- 1 no,5 ) collar ring percent u2013qty- 1 no

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Secunderabad Closes 10/09/2024

  View tender →

• Set of gauges for wag-7 loco tm shaft pinion 16 teeth [mating bull gear 65 teeth] as per rdso drawing no. skdl 4372 or latest & rdso-mp-mi-129/86 or latest and material tool steel to is: 3748/90, hardness: 50/55 hrc. set consisting of 03 items as follows, [1] profile deviation checking gauge [p value] with feeler gauge sizes 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm. qty/set. - 01 no. [2] tooth spacing k value checking go gauge size: 95.881 mm/ 96.019 mm. qty/set. - 01 no. [3] tooth spacing k val

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Secunderabad Closes 22/11/2024

  View tender →

• Set of gauges for wag-5 loco tm shaft pinion 15 teeth [mating bull gear 62 teeth] as per drawing no. ddo-296 & rdso mp-mi no: 129/86 or latest and material tool steel to is: 3748/90, hardness: 50/55 hrc. set consisting of 03 items as follows. [1] profile checking gauge [p value] with feeler gauge sizes 0.20 mm, 0.25mm, 0.30mm, 0.35mm, 0.40 mm. qty/set. = 01 no. [2] tooth spacing k-value checking (go) gauge size :95.589 mm/ 95.713 mm. qty/set. = 01 no. [3] tooth spacing k value ch

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Secunderabad Closes 07/05/2024

  View tender →

• (1) set of master gauge for setting of snap dial gauges for od of shafts thickness-40mm, material-cold work tool steel, hardness-60/65 hrc, accuracy (/- 0.002 mm). a set consists of 8 items as follows- (i) 319 mm, (ii) 305 mm, (iii) 214 mm, (iv) 205 mm, (v) 184 mm, (vi) 179 mm, (vii) 105 mm, (viii) 100 mm, qty- 01 no of each size . calibration certificate from nabl approved laboratory to be submitted along with material. (2) set of master setting ring gauges for zero setting of bore gauges fo

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closes 18/01/2024

  View tender →