1) hexagon head screw m16 x 60 conforming 2) hexagon head screw m12 x 50 conforming 3) hexagon nyloc head bolt m10 x 50 conforming to is:1364 4) hexagon head screw m12 x 40 conforming to iso:4017 / is:1364 part 2, 5) hexagon head bolt m12 x 90 conforming to is:1364 6) hexagon head screw m16 x 60 conforming to iso:4017 / is:1364 part 2,

Hexagon nut - is 1364 : part-3 / iso 4032 - m12 - 8 to icf drawing no. wtac-0-1-304, alt k/0, item no. 19.

Set of hardware for three phase loco as [set of hardware for three phase loco as per is 1364 (part 1) iso 4014 consists of (1) m 24x120 mm, property class 8.8 for cbc foundation = 12 nos., (2) m 24x90/54 mm, property class 8.8 for cbc rest plate = 12 nos., (3) m 24x70/54 mm, property class 8.8 for draft gear rest plate & hood = 24 nos., (4) m 27x180 mm thread length 115 mm, property class 8.8 for side buffers = 16 nos., (5) m 20x80 mm, property class 8.8 for damper foundation = 8 nos., (6) m 1

Set of hardware items as per icf drg. no. emu/m-3-2-070, alt. c [01 set consist of 05 items] which are as follows : [1] hex. head screw, is:1364(part-2)/iso:4017-m8x65-8.8 (item no.2) -- 1 nos./set [2] hexagon nut-is 1364(part 3)/iso 4032-m8-8 (item no.3) -- 1 nos./set [3] spring lock washer b8 is 3063 (item no.4) -- 1 nos./set [4] split pin iso 1234-2.5x20-st (item no.5) -- 1 nos./set [5] plain washer od25/id9x2 (item no.6) -- 2 nos./set.

Hex. hd. bolt m16x130, grade 8.8 confirming to is:1364(p-1) as per icf drg. no. dmu/dpc5-0-5-510, alt. g/3, item no. 19 for motor coach.

Screw hex head m 10 x 45 mm to is:1364, s 8.8, with one nut to is: 1364 property class 8, two nos. flat washer to is: 2016 and one spring washer to din 127b is: 3063 for fixation of cable cleat of tm (restricted to be procured from clw approved sources).

Hex. head bolt (size: m24 x 180 - 8.8) with prevailing torque type nut, m24 - 8, to drawing / specification icf drg. no. t-0-7-613, alt-b, item- 2 & 3.: specification as per drawing enclosed.

Compact fluorescent light fitting, single, without 4-pin 11w cfl lamp and electronic ballast. the cfl fitting is to be provided with a holder. the complete cfl fitting shall conform to rcf drawing no. cc 76215 alt-d.

(1) hex head bolt m10x25 mm with nut, property class 8.8, is 1364 with 02 nos plain washer is 2016 & one number spring washer is: 3063 (zinc/cadmium plated). (2) m6x25 mm hex head bolt & nut as per is-1364/2000 along with one spring washer as per is-3063/72 and two flat washer as per is-2016.

Supply of inflatable lighting towers equipped with high-efficiency led lights, designed to provide 360-degree glare-free illumination. each unit shall be integrated with a compatible genset for independent operation. the equipment shall conform to the specifications enclosed. preferred make: aska or equivalent. note: item with equivalent & better specification accepted.