Tender Details
Particulars | Details |
---|---|
Title |
Pvc Transparent Braided Pipe Size 1/2 Inch Used For Greasing Purpose With Minimum Air Pressure Of 8 Kg/Cm Square, The Pipe Should Be 100 Meters In One Length.
|
Description |
For Complete Deion And Other Details, Please Refer To Tender
|
Organisation | Ministry of Railways | Central Govt. Ministry/Department |
Tender Id | 106452100 |
Reference Number |
31245083B |
Tender Fee | 0 |
EMD | 0 |
Tender Value | |
Place | Hazipur |
Link | https://www.ireps.gov.in/ireps/supply/pdfdocs/082024/106452100/viewNitPdf_4691182.pdf |
Start Date | August 24, 2024 17:18 |
End Date |
30/08/2024 ( Expired 280 days ago ) Search Similar tenders? |
Join for More Relevant Opportunities |
Rotex magnet valve 3 way nc 10 type with manifold model 3038c, rotex drg. no. 081-055-02-c working pressure of air 2-10 kg/cm2, coil size iii railway stud type 110 volt dc, 3/8 inch bsp (f) thread pipe connection with manual actuator, body material aluminum embossing of make s.no. & date of mfg. to be done .
For complete deion and other details, please refer to tender
Read moreHigh pressure wire braided hydraulic hose of 1/2” size x 5 meter length conforming to sae 100 r1
Read more
Seamless pipe heavy grade size 32 mm nominal bore length 6 mtrs. to 8 mtrs. confirming to rdso str-04-abr-19 rev.-2 of dec 2019 with is:1239 part-1.
For complete deion and other details, please refer to tender
Read moreHyd. pressure hose 1/2 (8 no.) specification: - hyd. pressure hose no. 8 sae 100 r2 with maximum working pressure 276 bar and minimum bursting pressure 1103 bar. running length-each in 25 mtrs. of length. acceptable make/brand: soni, superseal, parker, aeroquip
For complete deion and other details, please refer to tender
Read more1/2 inch nylon braided air blow pipe. working pressure: 16 kgs/squre centimeter. inner dia: 1/2 inch. note: 1. valid warranty certificate from the oem to be supplied along with the material. 2. manufacturing date to be mentioned on the material body at different places.
For complete deion and other details, please refer to tender
Read moreSupply of pneumatic impact wrench with square drives 1/2 and its accessories as 1) pneumatic impact wrench with square drive 1/2 working torque within range 102-786 nm, maximum torque within range 1200-1250 nm. eight: maximum- 2.0 kg, length: maximum 200mm, free speed:8000-8200 rpm, 2) 1/2 filter regulating with lubricator frl, 3). 8x12 recoil hose-10mtrs, 4) 3/8 quick release coupling (steel), 4) 1/4 adapter (steel) for quick release coupling, 5) 1/2 square drive impact deep socket size
For complete deion and other details, please refer to tender
Read moreSterile disposable suction tube, specification - ,1. sterile suction catheter for single use. 2. single channel tube. 3. proximal end with cup connector, conical tip, allowing the tube to be connected to devices such as suction pump system. 4. open distal end, straight, with two side s. 5. diameter expressed in charriere, french gauge. 6. length expressed in cm. 7. colour code/ external diameter: visible on cup connector. 8. material: polyvinyl chloride (pvc). must be dhep free 9. size s
For complete deion and other details, please refer to tender
Read moreHydraulic hose pipe part no.- hs02, length (min.)-0.5 mtr., hose i.d.- 1/4 inch, working pressure 10000 psi with both end male fitting one side 3/8 inch-18 other side 1/4 inch-18 suitable for avlock make hand held unit. make: avlock/avdel or similar reputed brand.
For complete deion and other details, please refer to tender
Read morePolyurethane (pu) hose pipe dimension:- size 1/2 id 13 x 18 mm length :- 25 mtrs. working pressure : 188 psi (13bar) with suitable end fitting to be connected with air line and tool as per specification.
For complete deion and other details, please refer to tender
Read morePneumatic air blow gun (metalic body) with spiral air hose pipe of 10 mtr.length, clour-blue/yellow with quick coupling, both side socket & fitting. air gun & hose pipe should be tested at a pressure of 12 kg/cm square.
For complete deion and other details, please refer to tender
Read moreof your Industry type