1)10 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 1.18mt approx., number of plates: 10 nos. quantity.tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 11.78 mt 2)16 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 1.88 mt approx., number of plates: 16 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 30.14 mt 3)20 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 2.36mt approx., number of plates: 15 no. quantity.tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 35.33 mt 4)25 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 withsupplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 2.94mt approx., number of plates: 14 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 41.21 mt 5)32 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 3.77 mt approx., number of plates: 10 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension qty: 37.68 mt 6)36 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 4.24mt approx., number of plates: 4 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 16.96 mt 7)40 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b.. wt. of one plate - 4.71mt approx., number of plates: 20 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 94.2 mt 8)45 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 5.3mt approx., number of plates: 8 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 42.39 mt 9)50 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 5.89 mt approx., number of plates: 4 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 23.55 mt 10)56 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 6.59mt approx., number of plates: 12 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 79.13 mt

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender