Procurement of 8 mm thick ms plate as per is 2062 for unit ii esp inlet duct

Procurement of 10 mm thick ms plate as per is 2062 for unit v airpreheater esp columns and flue gas ducts

Procurement of 6 mm thick ms plate as per is 2062 for airpreheater primary air duct secondary air duct and flue gas ducts of unit iv

S1 ms shuttering plate 1 point 20 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s2 ms shuttering plate 1 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s3 ms shuttering plate 1 mtr x 0 point 60 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s4 ms shuttering plate 1 mtr x 0 point 50 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s5 ms shuttering plate 1 mtr x 0 point 30 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s6 shuttering nut and bolt of size m12 x 50mm comma m12 x 60mm of good quality and branded,s7 round ms pipe 50mm dia x 6 mtr long x 3 point 5 mm thickness of good quality and branded,s8 round ms pipe 50mm dia

Ms shuttering plate of size 1 mtr x 1 pt 2 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50x 6 mm having properly welded uniform finish approx weight not less than 69 pt 97 kgs,ms shuttering plate size 1mtr x 1 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50 x50 x6mm having properly welded uniform finish appx weight not less than 51 pt 70 kgs,ms shuttering plate size 1 mtr x zero pt 60 mtr made with 3 pt 15 mm thick ms sheet with angle iron size 50x50x 6mm having properly welded uniform finish appx weight not less than 31 pt 92 kgs,ms shuttering plate size 1 mtr x zero pt 5 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50 x 6mm having properly welded uniform finish,ms shuttering plate size 1 mtr x zero pt 3 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50x 6mm welded uniform finish appx weight not less than 20 pt 46 kgs,ms shuttering plate size 1 mtr x zero pt 2 mtr made with 3 pt 15 mm thick ms sheet with angle iron size 50x50x

1) retro reflective whistle board w/l hindi and english. drg. enclosed, board should be made with 2mm thick aluminum sheet with 25*25*3mm ms angle frame as per rdso drawing and rdso specification attached in document. 2) retro reflective caution indicator board back support angle frame 25x25x3 and clamping arrangements as per attached rdso provisional specification for retro-reflective indicators, may-2011 and dimensional drawing attached.

Extension purlins of rhs 96x48x4mmx0.45mtr,plates for purlins150x100x6mm,ms tee 50x50x6mm 54rm for ceiling panels,ms angle iron 50x50x6mm 51rm,clips for angle and tee,aluminium doors 3x7 feet,aluminium windows,sunshade for doors and s with sheets,wall panels 63mm thick,ceiling panels 40mm thick weight 95.6 sq mtr,flashing for corners 75x75,bird cover 50 kgs,profile colour coated sheet 3.90 mtr x 1050 x 0.63mm,profile colour coated 2.4 mtr 16 nos x 16 256 kgs,ridge cover 300x30xx3000mm long x 0.63mm,foundation bolts 16mm dia x 450mm,hexagonal bolt 12mm x 40mm,hexagonal bolt 16mm dia x 40mm,csk bolt 12mm x 40mm,nuts bolts 12mm x 100mm,ms column of rhs pipe of size 122x3.6mm x 2.8 mtr long,veranda columns of rhs section of size 96x48x4mmx1.9 mtr long,base and top plates of columns 250x250x8mm,top plates for veranda columns 150x150x6m,clips for bottom and top channels,top and bottom channels of size 30x65x30x2mm,clips for channels,truss as per following 8.1 rhs 96x48x4mm 15.75rm,plates for trusses of size 2

Ms column of rhs pipe of size 122x3.6mm x 2.8 mtr long,veranda columns of rhs section of size 96x48x4mmx1.9 mtr long,base and top plates of columns 250x250x8mm,top plates for veranda columns 150x150x6m,clips for bottom and top channels,top and bottom channels of size 30x65x30x2mm,clips for channels,truss as per following 8.1 rhs 96x48x4mm 15.75rm,plates for trusses of size 250x250x8mm and joint plates of size 15x50x6mm,purlins of rhs section 96x48x4mmx2.72 mtr,extension purlins of rhs 96x48x4mmx0.45mtr,plates for purlins150x100x6mm,ms tee 50x50x6mm 54rm for ceiling panels,ms angle iron 50x50x6mm 51rm,clips for angle and tee,aluminium doors 3x7 feet,aluminium windows,sunshade for doors and s with sheets,wall panels 63mm thick,ceiling panels 40mm thick weight 95.6 sq mtr,flashing for corners 75x75,bird cover 50 kgs,profile colour coated sheet 3.90 mtr x 1050 x 0.63mm,profile colour coated 2.4 mtr 16 nos x 16 256 kgs,ridge cover 300x30xx3000mm long x 0.63mm,foundation bolts 16mm dia x 450mm,hexagonal bolt

Deck sheet 1.20mm tr 50 including all necessary clamps fittings and fixtures etc for roofing as directed by engr in charge,ms iron angle of size 50mm x 50mm x 6mm conforming to is 2062 2011 grade e250 approx 4.52 kg per metre including cutting of appropriate size and painting,quick setting compound confirming to is 8041 1990,water proofing compound in 1 kg packing,red oxide primer and paint for steel surfaces,pcc solid block 400x200x200mm minimum strength 50kg per sqcm pcc shall conform to is 2185 part i 2005 solid block made out of pcc 1 3 6 having the compressive strength 5 kn per sqmm,cement opc 53 grade in poly bag of 50 kg each make acc ambuja india cement birla ultra tech lafarge,sand coarse conforming to is 383,stone aggregate coarse 20 mm conforming to is 383,transparent pipe 5 mm dia bore for water leveling best quality,plaster trowel with wooden handle isi marked.,fish line best qulity,galvanised iron pan mortar tasla 18 guage 16 inch dia minimum weight of 1 kg make taparia tata,picks axes with chie

For complete deion and other details, please refer to tender