Similar Tenders

• Nylon-66 cable tie, self locking, non-releasable.colour: black in packets of 100 numbers. size: 300 mm in length x 4.8 mm in width (/- 10 percent tolerance is accepted ) as per clw specification no. clw/es/3/0131/d make: superlock /konark / lockwel / nylock / ty-cab / black burn only.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Guwahati Closed 19/04/2024

  View tender →

• Book ruled 2 quires 20.5 x 33.5 cm [tolerance plus or minus 5mm] 60 gsm

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Hubli Closed 24/05/2024

  View tender →

• Nylon-66 cable tie, self locking, non-releasable. colour: black in packets of 100 numbers. size: 650 mm in length x 9 mm in width (/- 10 percent tollerance is accepted ) as per clw specification no. clw / es /3 / 0131 /d make: superlock /konark / lockwel / nylock / ty-cab / black burn only.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Guwahati Closed 19/04/2024

  View tender →

• Pneumatic fender tubeless 660 x 1160 mm tolerance plus or minus 10 percent,sand paper isi mark,whit

  Department of Defence | Ministry of Defence Closed 04/03/2024

  View tender →

• Cable tie set consisting of 05 items details as per annexure attached herewith. specification: clw specification no.- clw/es/c-54. [all dimension in mm and tolerance plus minus 1 percent ]

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Hazipur Closed 20/08/2024

  View tender →

• High tensile bolt size 12x30 mm, 1.75 mm pitch, grade of bolt will be 8.8 , plating / finish phosphate as per is: 1367 (part-12)/1981 rev-2, quantity tolerance plus minus 5 percent

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Jaipur Closed 18/07/2024

  View tender →

• Coconut broom with wooden plug of nominal length in 800mm tolerance plus/minus 10 percent ,weight-500 gram (min) tolerance plus 15 percent and minus 0 percent without wooden plug, size of wooden plug, tapper wooden plug shall be of length 150mm reasonably round having dia of 25mm at top and 5mm at bottom. material of tide up round, g.i. wire, no. of round is 4. size of g.i. wire dia 1.2mm.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Gorakhpur Closed 18/11/2024

  View tender →

• Set of copper joint tube copper sleeve each of length 15mm, tolerance plus minus 5 percent confirming to is - 191, as per annexure-a. 1 set consist of 04 items total qty - 21,000 nos

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Gorakhpur Closed 04/09/2024

  View tender →

• Polyester staple fiber pillow of 100 percent white virgin hollow fiber, weight 450 gram (with tolerance as plus 20 gram and minus 10 gram) surrounded by virgin hollow fiber sheet of 20 mm thickness minimum . pillow covering size shall be 60 cm ( plus/minus 1 cm) x 33 cm ( plus/minus 1 cm) and should contain 50 percent ( minimum) polyester yarn & balance cotton with nwr mark on corners with indelible ink. pillow should be resistance to normal wash. tag in corner should be stitched in each pillo

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Jaipur Closed 11/02/2025

  View tender →

• Abrasion resistance rubber sheet (size-width 1200 mm , thickness- 6 mm, length- 10 mtrs per roll ) suitable for shot blasting machine having hardness shore a 45-55, tensile strength 15 mpa minimum, specific gravity(g/cc)-1.10 material: natural rubber, firm shall provide test certificate from nabl authorized laboratory. make: bharat rubber/ zenith/ duratuf/surfex, tolerance:- plus/minus 10 percent of thickness, plus/minus5 percent of length, plus/minus 2 percent of width

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Guwahati Closed 29/11/2024

  View tender →