Safety chain with hook/ suitable locking arrangement at ends for pad locking having length of 10 feet

Indigenous ts6 transport spring for hmt feed size 45x40x7(7.5 meter) without welding joint. moc: ss304.,hexamine feeding screw, od-52mm, pitch-50mm, cord dia: 7.5mm, running length-17 meters without welding

Sproket/wheel for simplex roller chain 50 teeth, 2.5 inch pitch. bore- 106mm(id) , mat: en8/c-45, teet,chain roller no 200-2 1/2 pitch simplex, total link 78 nos. (77 link 1 connecting link) with one sin,sprocket 23 teeths 2.5 pitch, id-100mm, mat: en8/c-45, flame hardened to minimum 300 bhn, suitable

Chain (roller conveyor chain), for frm m [chain (roller conveyor chain), for frm machines.equivalent part no. su3 p, make- plasser/rollan/mp. note: material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. note.: the necessary test certificate to be submitted by supplier along with supply of material. ]

Wooden slate for stacker,ms roller for stacker,carriage bolt for stacker with nut and washer complete,uhm slate for conveyor,counter sunk screw complete,uhm strip 50x6 mtr,uhm strip screw complete,split pin suitable for conveyor,sprocket 9 teeth,return roller,return roller shaft,dye pressed strip for stacker,driving chain for stacker pitch 1 inch dia 16mm

Disconnecting and earthing device, 8 pole, 2 way, without off, on load 125 amps at 1000v ac, 2no+2nc and with heavy handle and pad locking arrangement in one position, mounted in a stainless steel enclosure, suitable for ac 23 duty and conforming to iec60947 maximum depth including handle 480mm suitable for switch board cabinet of lhb ac coach as per rdso letter no. el/7.1.108/mssbc dated 17.09.2021 & rdso letter no. el/6.8.21/tl-ac committee dated 11.05.2023 and rdso specification no. rdso/pe

Chain with flight bar assembly consisting of a chain 26x92x210 links confirming to is din 22252 or equivalent bis standard 02 nos., b flight bar 35 nos part no 317015 or equivalent,chain connector suitable for chain 26x92 02 nos. for l and t feeder breaker, part no 31705 or equivalent drawing enclosed,t head bolt for l and t feeder breaker, part no 31702 or equivalent drawing enclosed,nylock nut for l and t feeder breaker, part no 31703 or equivalent drawing enclosed,sprocket for drive shaft for l and t feeder breaker, part no 31661a or equivalent,sprocket for tail end shaft for l and t feeder breaker, part no 31641a or equivalent,sliding bearing block assembly for tail end shaft without bearing. suitable for bearing no23124cc for l and t feeder breaker, part no 31663 or equivalent,drive shaft assembly complete with sprockets, shaft, bearing, bearing block, distance piece etc. in assembled condition for l and t feeder breaker, part no 3164 or equivalent,tail shaft assembly complete with sprockets, shaft, bear

3 kvar metalized polypropylene gas filled, wavy cut three phase self-healing type capacitors, rated at 480v, 50hz, rated current 3.6 amps. capacitor should have discharge resistor and over pressure disconnection as per rdso modification sheet no. rdso/pe/ms/ac/0054-2011 (rev-1)/latest and confirming to is: 13340 (part-1): 2012 / iec 60831-1:2002/latest with isi mark suitable for capacitor bank of lhb ac coach. acceptable makes: m/s epcos or m/s vishay or any other equivalent capacitor confirm

3 kvar metalized polypropylene gas filled, wavy cut three phase self healing type capacitors, rated at 480v, 50hz , rated current 3.6 amps. capacitor should have discharge resistor and over pressure disconnection as per rdso modification sheet no. rdso/pe/ms/ac/0054-2011 (rev-1)/latest and confirming to is: 13340 (part-1) : 2012 / iec 60831-1:2002/latest with isi mark suitable for capacitor bank of lhb ac coach. acceptable makes: m/s epcos or m/s vishay or any other equivalent capacitor confir

For complete deion and other details, please refer to tender