Construction of 1st type drain and p/l 80mm thick inter locking paver block m-40 grade in various streets in lakkarpur f block ward 22, faridabad. under councilor fund (1.00 c.r). recall

Relaying of 80mm thick ipb in various streets of sector 13 extension and sector 13 new housing board, ward no. 10, municipal corporation karnal.(recall)

Copper alloy taps/stop valves (v2) conforming to is 8931,health faucet,plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763,cast copper alloy screw down bib taps and stop valves for water services conforming to is 781,bathroom water shower (v2),gi tubing 80 mm medium grade isi marked,gi tubing 40 mm medium grade isi marked,gi tubing 65 mm medium grade isi marked,gi tubing 20 mm medium grade isi marked,gi tubing 50 mm medium grade isi marked,gi tubing 25 mm medium grade isi marked,gi tubing 32 mm medium grade isi marked,float valve pvc 20 mm with ball and rod,float valve pvc 15 mm with ball and rod,gi tubing 15 mm medium grade isi mark,gi wire cloth 0.56 mm nominal dia wire and average width of aperture 1.18 mm as approved

Rough cost estimate for providing and laying of 80mm thick interlocking paver blocks and drain type-1 in newly added colony i.e. village bhupani (colony id-12576), bhupani, faridabad. recall

Rough cost estimate for providing and laying of ipb 80 mm thick m-40 grade at kapil vihar park to nalanda apartments, houses 44 to 58, house nos. 229 to 249, and house nos. 95 to 103 streets of sector 21c of ward no. 20 (new) faridabad.

Copper alloy taps/stop valves (v2) conforming to is 8931,copper alloy taps/stop valves (v2) conforming to is 8931,copper alloy taps/stop valves (v2) conforming to is 8931,floor drain traps (v2),waste fittings for washbasin and sinks as per is 2963,waste fittings for washbasin and sinks as per is 2963,ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774,floor drain traps (v2),bathroom water shower (v2),connector pipes for washbasins/ sinks/ geyser,gi elbow 15mm isi marked,gi elbow 20mm isi marked,gi elbow 25mm isi marked,gi elbow 50mm isi marked,gi elbow 80mm isi marked,gi nipple 15mm x 100mm class b,gi nipple 15mm x 150mm class b,gi nipple 15mm x 50mm class b,gi nipple 15mm x 75mm class b,gi nipple 20mm x 100mm class b,gi nipple 20mm x 150mm class b,gi nipple 20mm x 75mm class b,gi nipple 25mm x 100mm class b,gi nipple 25mm x 150mm class b,gi nipple 25mm x 75mm class b,gi nipple 40mm x 100mm class b,gi nipple 40mm x 150mm class b,gi nipple 50mm x 100mm class b,gi plu

Providing and laying 100mm and 150 mm dia of ductile iron (di) isi marked k-7 water h.no b-146 to b-188, b-169 b-200 , 391 to d-267, 290to 319a, b147 to b-180, c-100 c-85a, c-45a toc45f, c-74 toc-63 sector 11 block b and c of ward no 3 old faridabad

Supply of field toilet block 06 seater relocatable,deatchable ms steps as per drawing and specification,stainless steel indian water cloiwc s trap thickness 1 point 5mm grade,stainless steel wash hand basin,cp towel rod of 18 inch length make isi marked,cp tap weight not less than 450 gm,cp pillar tap for whb weight not less than 450 gm,cp steel soap dish isi marked,plastic cabinet fitted with looking glass of size 1.5 ft x 2 ft with isi marked,500 ltr capacity water tank isi marked 4 layer cover with iron cage,pvc wire insulated cable 1 point 5 sqmm,pvc wire insulated cable 2 point 5 sqmn,pvc casing capping 20 mm size make topson or plaza or polyplast,5 pin 5 amps switch socket combination with pvc mounting box,11 watt led with lamp as approved to be placed on the wash hand basin,11 watt led with bakelite angle holder,power point of 5 pin 15 amp socket and switch combination of modular type,exhaust fan of 250mm sweep single phase 230 or 240 volt with shutter,mcb dp 32 amps conforming to is 2282 to 1996,c

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),stainless steel sinks for domestic purposes (v3) as per is 13983,plywood for general purposes marked to is 303 (v3),plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763,plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763,wire mesh tainless steel of size 1.2 x 15 mtr with 0.56mm x 1.18mm appartus,peg of six,aluminium sliding bolt 300mm isi mark,pre-laminated particle board one side teak melamine finish and other side white melamine finish 8x4x18mm thick,cushion cover made out of superior quality tapestry cloth size 533x560x100 mm,wooden beading teak wood 25 mmx 25 mm,door seal with aluminium frame 3 feet long,sink coupling,pvc bullets 50mm con

Providing and laying 80mm thick interlocking paver block (isi marked) with drain and water line at various streets described in pachsheel colony id no. 9165 (new approved colony) in ward no. 25 div-5 faridabad.