Barrel nipple 40 mm nb,150 mm long,barrel nipple 25 mm nb,100 mm long,barrel nipple 15 mm nb,100 mm long,barrel nipple 20 mm nb,100 mm long,equal tee 40 mm nb,equal tee 20 mm nb,equal tee 15 mm nb,equal tee 25 mm nb,unequal tee 25 mm,15 mm,elbow 40 mm nb, 90deg.,long-radius elbow 25 mm nb, 90deg.,long-radius elbow 80 mm radius,long-radius elbow 100 mm radius,socket 15 mm nb,socket 20 mm nb,socket 25 mm nb,socket 50 mm nb,union 40 mm nb,union 25 mm nb,reducer 25 mm,15 mm

Compressed asbestos fibre jointing sheet metallic 3.2mm thick,nipple g.i. heavy duty,g.i.socket heavy duty both end threaded confirming to is-1239 by1964 1by2 inch,g.i.socket heavy duty both end threaded confirming to is-1239 by1964 2.inch,reducer g.i.heavy duty 1inchx1by2inch,reducer g.i.heavy duty 1inchx3by4inch,reducer g.i.heavy duty 2inch x 1inch,reducer g.i.heavy duty 3by4inchx1by2inch,gi union 1inch,m.s.flanges heavy duty confirming to is-6392by1971 50.mm n.b,elbow g.i.heavy duty 1inch x 90 degree,bend g.i. with socket heavy duty 2inch x 90 degree,bend g.i.with socket medium duty 1inch x 90 degree,bend g.i.with socket medium duty 1by2inchx 90 degree,nipple g.i. heavy duty 1inch x 6inch,elbow g.i. medium duty 1by2inch x 90 degree,g.i.socket heavy duty both end threaded confirming to is-1239 by1964 1 inch,plug g.i. 1by2inch,g.i.socket heavy duty both end theaded confirming to ts-1239 by1964 3by4 inch,plug g.i. 3by4inch,compressed asbestos fibre jointing sheet metallic 1.6mm thick

Safety chain, conforming to is:3076-1984, grade t (8) or latest; short link chain of nominal 12 mm diameter, overall length 4.572 metres, with long links at both ends and suitable hook/locking arrangement for padlocking.as per rdso drawing specification no. tfc/spec./374/safety chain. and aligned with operating manual guidelines.

Kirschner wire 250 mm long x 1pnt0 mm dia both ends trocar point,kirschner wire 250 mm long x 1pnt5 mm dia both ends trocar point,kirschner wire 250 mm long x 2pnt0 mm dia both ends trocar point,kirschner wire 15cm x 2mm both ends trocar,headless compression screw 3pnt0mm pnttitaniumpnt,headless compression screwpnt 2pnt4 mm short thread pnttitaniumpnt,olecranon platepnt anatomical 3pnt5 mm right or left complete construct with 6 locking and 4 cortical screws pnttitaniumpnt,distal radius volar locking plate complete construct with 6 locking and 3 cortical screws titanium,clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws left or right side stainless steel 316l,clavicular anatomical plate 3pnt5 mm complete construct for left or right side with 6 cortical screws pntss 316lpnt,olecranon platepnt anatomical 3pnt5 mm right or left complete construct with 6 locking and 4 cortical screws pntstainless steel 316lpnt,quotproximal tibial lateral periarticular locking plate system

Set of nipples required for pneumatic pipelines consisting of two items as follows. 1) 1/2 x 1/2 nipples both sides parallel threads as per drg. no. b/trs/pn.eqpt/3/56 or latest. qty/set. = 03nos. 2) 3/4 x 1/2 reducing nipple taper & parallel thread(nom dimension in mm on od: 27 x 21r & nom diameter in mm on id: 20.15 as per drg. no. b/trs/pn.eqpt/3/18, alt a or latest if any. qty/set. = 01no. note: ten sample sets should be got approved before effecting bulk supply.

Reducing nipple of size 1/2 x 3/8 bsp threading (parallel) on both sides, total length - 40mm; 1/2 threaded length -15 mm; 3/8 threaded length-15mm, hex. head thickness-10mm, width af27mm, 3/8 ends inside should have tapered profile (cone type). material: carbon steel astm-a108 & grade a1018 with zinc coated. note: material should be machined from forged planks & not to be casted.

15 mm galv. steel tubes medium grade is: 1239 part-i/2004 both ends screwed one end with socket and other end with plastic thread protector , randum length of 4 to 7 m continuously welded electric resistant weld(erw), high frequency induction welded(hfiw), hot finished welded (hfw) light coated isi mark and socket also to be isi marked confirming to is: 1239 (part-ii)/2011.

Advc 63 10 i p a pneumatic cylinder of festo make,festo make pneumatic actuator model dsnu 20 80 p a mq,double acting pneumatic round cylinder with flexible cushioning rings at both ends position sensing via proximity sensor 25 mm bore and 80 mm stroke,dsl 20 25 270 cc a s20 kf b pneumatic cylinder of festo make,pneumatic parallel gripper double acting total stroke length of 15 mm and bore of 25 mm make festo model number dhps 25 a,dpzj 16 100 p a kf s2 pneumatic cylinder of festo make,dsnu 16 125 p a pneumatic cylinder of festo make,festo make double acting pneumatic cylinder with flexible cushioning rings at both ends position sensing via proximity sensor bore 25mm stroke 15mm,festo make pneumatic actuator model slg 8 100 ysr a,festo make pneumatic cylinder 12mm bore and15 mm stroke model number adn 12 15 a p a,festo make double acting swivel and linear drive unit 20 mm bore and 25 mm stroke make festo model number dsl 20 25 270 cc a s2 kf b,festo make magnetic proximity sensor type sme 10 kl led 24 part nu

Bathroom or toilet mirror (v3),stainless steel shelf rack,towel ring,copper alloy gate valve for waterworks purpose (v2) conforming to is 778,towel rail,copper alloy gate valve for waterworks purpose (v2) conforming to is 778,bathroom water shower (v2),health faucet,flexible drain hoses for wash basins/ sinks,bathroom water shower (v2),bathroom water shower (v2),stainless steel sinks for domestic purposes (v3) as per is 13983,towel ring,connector pipes for washbasins/ sinks/ geyser,floor drain traps (v2),flexible drain hoses for wash basins/ sinks,floor drain traps (v2),flexible drain hoses for wash basins/ sinks,copper alloy gate valve for waterworks purpose (v2) conforming to is 778,gi pipe 20 mm dia,gi pipe 25 mm dia,gi union 15 mm,gi pipe 15 mm,gi tee 25 mm material,gi union 20 mm,nipple gi 20mm x150mm male threads on both ends,gi tee 15 mm,gi tee 20 mm,gi nipple 25mm dia 100mm length,gi nipple 20 mm dia 75 mm length,gi nipple 15mm dia 150mm length,gi hexa nipple 25 mm,gi nipple 20mm dia 100 mm length,gi

Pipe water g. i. 1/2” medium quality conforming to is: 1239 (part-i) (weight should be 1.22 kg per met,pipe water g. i. 3/4” medium quality conforming to is: 1239 (part-i) (weight should be 1.58 kg per met,pipe g. i. 1 inch (25 mm) medium quality conforming to is: 1239 (part-i) screwed at both ends, pipe th,g. i. pipe 40mm dia medium weight, screwed at both end socket at one end and other end protected with,pipe g. i. size 2” medium quality confirming to is: 1239 (part-i) 1980, threaded at both end socketed,a set of 1/2” gi fittings consist of nipple 1/2” x4” -75 nos. , socket-50 nos, elbow-50 nos. , union-50,a set of 3/4 gi fittings consist of socket-50 nos, . elbow-50 nos. , nipple 3/4” x4” -75 nos. , union–,a set of 1” gi fittings consist of socket-75 nos, . elbow-75 nos. , nipple 1” x4” -75 nos. , union– 50