Male elbow of size:1/4 inch x 10mm (male npt threads x metric od tube) with 10mm nut and suitable 10mm double ferrule fittings of is:316. material: astm a108 grade-1018.

Male elbow of size:1/4 inch x 10mm (male npt threads x metric od tube) with 10mm nut and suitable 10mm double ferrule fittings of is:316. material: astm a108 grade-1018

Set of 04 items required to elbow connector as per clw drg. no. 1209-18.406-035, sl. no. 1, alt. 3 or latest if any for sander equipment of wag-9 locos as follows. 1) body(elbow). qty/set. = 01 no. 2) back nut. qty/set. = 01 no. 3) back ferrule. qty/set. = 01 no. 4) front ferrule. qty/set. = 01 no.

Set of ss pipe fittings for sander pipe [set of ss pipe fittings for sander pipe as per clw specification no. clw/ms/03/053 alt-21. one set consists of 3 items 26 nos. as: - (1) 1/2 x 1/4 male connector - 10 nos. (2) 1/2 union - 8 nos. (3) 1/2 union tee - 8 nos. (materials to be procured from clw approved sources only).]

Green rubber hose pipe for mrb and sctmb of size: id: 10mm, od: 20mm, length: 800mm as per clw drg. no. 1209-11.344-046 alt - 3 or latest if any.

Set of spares for water reservoir assembly of wiper for 3 phase locos as per clw spec. no. clw/ms/3/50 alt-6, clw drawing no. 1209-07-303-020. (water reservoir with ca0pacity of 08 ltrs) . set details as follows: 1) water reservoir with capacity of 08 ltrs, qty. = 01 no. 2) mounting plate , qty. = 02 nos. 3) water tank filter, qty. = 01 no. 4) plug , qty. = 01 no. 5) ss hex. screw m5 x 12 , qty. = 04 nos. 6) o ring ,- dia-19 x 3mm qty. = 02 nos. one set consists of 06 items in 11 nos. materia

Set of various od setting master gauges consisting of twelve sizes as follows. (i) dia 320.000 mm +/- 0.005 mm. qty/set. = 01 no. (ii) dia 305.000 mm +/- 0.005 mm. qty/set. = 01 no. (iii) dia 260.000 mm +/- 0.005 mm. qty/set. = 01 no. (iv) dia 215.000 mm +/- 0.005 mm. qty/set. = 01 no. (v) dia 205.000 mm +/- 0.005 mm. qty/set. = 01 no. (vi) dia 184.000 mm +/- 0.003 mm. qty/set. = 01 no. (vii) dia 180.000 mm +/- 0.003 mm. qty/set. = 01 no. (viii) dia 150.000 mm +/- 0.002 mm. qty/set. = 01 no. (

Set of push button switches confirming to clw specification no. clw/es/s-8/m or latest, for material and requirement as follows 1. push button switch (green) 2 nc - qy/set - 2 nos 2. push button switch (green 2 no - qty/set - 2 nos 3. push button switch (black) 2 no - qty/set -12 nos 4. push button switch (black) 1 no +1 nc - qty/set - 3 nos 5. push button switch (red) 1 no +1 nc - qty/set - 3 nos

Set of blocking diodes illumination test (position no. 123) & its accessories as per clw specn.no. clw/es/3/0055, alt-h, one set consists of 04 items aggregating to 17 pieces as follows: (1) diode block 1.5a, 1600v, type diblo-5, dsi30-16a as per abb document no. hbtb585480 r0001, qty:01 no. (2) connector socket 14 poles, 6a, 240v, ac, as per abb document no. hbt415175p0001, qty:01 no. (3) contact as per abb document no. hbt415176 p0001, qty:14 nos. (4) wire clip as per abb document no. hbt415

Set of nipples required for pneumatic pipelines consisting of two items as follows. 1) 1/2 x 1/2 nipples both sides parallel threads as per drg. no. b/trs/pn.eqpt/3/56 or latest. qty/set. = 03nos. 2) 3/4 x 1/2 reducing nipple taper & parallel thread(nom dimension in mm on od: 27 x 21r & nom diameter in mm on id: 20.15 as per drg. no. b/trs/pn.eqpt/3/18, alt a or latest if any. qty/set. = 01no. note: ten sample sets should be got approved before effecting bulk supply.