Construction of high-level platform from existing rail level platform, dismantling & re-fixing of paver blocks, fixing of chequered tiles at gonpura, construction of protection wall retaining wall and other miscellaneous works in connection with construction of new line from neora to jat dumri of danapur division of east central railway in bihar, india.

Custom bid for services - total 07 quantity of mobilization and demobilization for deployment and erection of boring craft & rig at each borehole location including gst as per sow,custom bid for services - total 280 running meter of boring of minimum 150 mm diameter boreholes up to 10 meters minimum from existing ground level (egl) including setting, dismantling, shifting of rigs & machineries etc including gst as per sow,custom bid for services - total 175 quantity of conducting standard penetration tests as per is 2131 2025 to bored borehole at all depths (interval of 1 dot 5 meters) as required including gst as per sow,custom bid for services - total 175 quantity of disturbed sample (interval of 1 dot 5m) including gst as per sow under geotechnical investigations,custom bid for services - total 91 quantity of undisturbed sample (interval of 3m) including gst as per sow under geotechnical investigations,custom bid for services - total 28 quantity of water sample including gst as per sow under geotechnical i

Fuse,adaptor,adaptor,adaptor 1 by 4,adaptor g5 by 4a,adaptor male,adaptor tee,banjo bolt,bolt 1 inch,cap screw m5,circlip,circlip,circlip item 5 tobe fitted,clamp,clevis right hand thread,clip worm drive,clip worm drive 59 by 83 mm,clip hose,clip jublee,gasket fuel level sensor,grommet 24 mm,kit shim 64 x 57,kit shim 72 x 65,kit shim 79 x 72,relay head light,nut side differential,nut male 1 inch

Electrical work in c/w provision of minimum essential amenities at various stations of bkn div to recoup shortfall in the jurisdiction of den/east/bkn, provision of high level island passenger platform & other passenger amenities between line no. 9 & 10 & extension of platform no.6 at hisar station, raising of pf no. 1 at lahli & bamla station to high level & extension to accommodate full length trains & raising of pf no. 1 at dhana ladanpur halt station & extension

Tiruchchirappalli division : 1). proposed raising of pfs to high level at 12 stations (nsg6- 2, hg3- 9, hg2-1) (13 pfs) in sr.den/east jurisdiction 2).raising of pfs to high level at 8 stations ( nsg6- 5, hg3- 1, hg2- 2) (11pfs) in sr.den/north jurisdiction 3).augmentation of facilities for divyangjan passengers - raising ofexisting ll/ml pfs to hl pf s in tpe (hg-2-pf 1), tom (hg3-pf 2) & mcj (hg-2, pf 1) - electrical general arrangements - works contract.

Level crossing fittings on psc sleepers bg for 60 kg as per rdso drg no. t-4916 (alt-3) including fittings c.i. brackets, c.i. distance bracket, turn bolts, single coil spring washer, plate screw with latest corrigendum issued up to 15 days before the date of opening of tender. list of quantity of one set fittings for level crossing psc sleepers 60 kg as per rdso drg. no. t-4916 (alt-3) is as under : (1 ) c. i. bracket to rdso drg. no. t-4917 and speci. irs:t-10 , qty. 2 nos. (2) c. i. distanc

Level crossing fittings on psc sleepers bg for 60 kg as per rdso drg no. t-4916 (alt-3) including fittings c.i. brackets, c.i. distance bracket, turn bolts, single coil spring washer, plate screw with latest corrigendum issued up to 15 days before the date of opening of tender. list of quantity of one set fittings for level crossing psc sleepers 60 kg as per rdso drg. no. t-4916 (alt-3) is as under : (1 ) c. i. bracket to rdso drg. no. t-4917 and speci. irs:t-10 , qty. 2 nos. (2) c. i. distanc

Gasket cover plate,washer bonded,plug magnetic 3 by 4 bsp,gasket fuel level sensor,screw,step,filter assembly hydraulic return,washer bonded,gauge sight 41mm af hexagon torque 9 10 nm,cap sideshift stabiliser,pin pivot,spacer,plug locking,mounting rubber,mounting resilient,setscrew m12 x 35mm,grille front,jcb logo,handle bonnet,grommet blind,cable wire 1000mm,beading rubber,pin,retainer hose,clip e type,fastener drive,key 2.2 mm,decal power and eco mode,decal,gaiter parkbrake lever,label relay,chart lubricant,grip,decal care link,decal warning,label fuse,decal,plate compression,mount relay,liner roof assembly,light interior,liner roof,liner roof,pad foam,circlip,grommet,screw m6 x 25,rubber pad 30x20x12,strut gas door,bush,grommet,screw grub,grommet,catch window lockback,screw m5x30 button head,door seal left hand,gasket door handle,lock cover door left hand side,strap check,door seal right hand,lock cover door right hand,seal window left hand side,handle righthand m6,rubber washer,handle assembly side window

335 oblique y98028, cab rops oblique fops, plate iv a,335 oblique y3428, support roof liner, plate iv f,336 oblique y2352, rim wheel 16.9 x 28,332 oblique a5841, cylinder nitrogen,335 oblique c9952, piston rod, plate xvi g,320 oblique 03394, flywheel assy. w300,335h1323, piston rod, plate xvi n,32006578, gear injection pump 65t, plate xxxvii a,336 oblique y2353, rim wheel 11x18,334 oblique y7790, harness panel cold start, plate viii d,458 oblique 20693, disc park brake,320 oblique 05551, manifold air induction turbo,333 oblique y2690, bumper,335y3307, sensor fuel level, plate iii c,334 oblique y3895, hub planetary,320 oblique 03114, rod connecting,40302290, battery, plate viii e,71820232, lead grid heater ve feed, plate xxvii a,914 oblique m4448, drive shaft,320 oblique 08587, bracket idler non-ac,335a8862, pump gear 14 cc, plate xiv b,335 oblique g7068, bracket support,45930298, fork selector 3rd, plate xxi c,335h3924, kit seal , plate xvi b,128c5857, window frame rh, plate iv q,320 oblique 05693, heater air

Drive belt orginal hberg mc,ina nk 35 30,adn-32-30-a-pp5-a 572659,pnu cyl advu-50-15-p-a, festo,apms,aevu-25-5-p-a 156945 p608,dnc-63-40-ppv 163416,dnc-20-40-ppv,pn. cylinder dnc-40-40-ppv 163352,timing belt 630 h 492 , width 25 mm,hex spanner 6 mm to 27 mm,allen key 2.5 mm to 18 mm,dsnu-20-20-ppva 1908291,festo cassette cpv10-m1h-5js-m7 161415,pn cyl. smc mgpm25tf-20,pn cyl. smc ecq2wf32-10dm,pn cyl.smc cq2b20-10s,belt hpd 525 5m,1778 14 m timing belt width 40 mm,power grip 210l timing belt width-10mm,air hose pipe id - 16 mm od - 19 to 22 m,air hose pipe id - 25 mm od - 28 to 32 m,air hose pipe id - 0.75 inch od - 42 mm,air hose pipe id - 1.5 inch od - 42to50,air hose pipe id - 0.5 inch od - 15to18,pipe cutter pvc pu ratchet cutting actio,timingbelt_380 h 100_epp,timing belt - 360 t5 w-10 mm, teeth 72,a 48 13 x 1220 li,htd 400 5m, 8 mm width,small sprit level bottle,v belt a 83,a 13 x 1220 li,a32 13 x 815 li,v belt a 56,v belt b 58,v belt b-54,v belt a 43 new wing,v belt b 52,timing belt 2800 8m,tim