Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Brushless dc railway carriage fan 225 mm sweep 110v dc bracket type complete as per rdso specification no. rdso/pe/spec/tl/0021-2005 rev.3 with amendment no. 1 with frp blade and crash worth guard. the guard shall be conforming to drg. no. icf/sk-7-6-158 coi-ii alt.g od of the fan guard 270mm plus minus 2 mm. dimension of fan shall conform to drawing rdso/pe/sk/tl/0026-2002 (rev 0 ) and complete fan will be silver ash colour

Lateral damper for secondary air spring suspension arrangement to icf drg. no. dc/emu/m/asr-0-5-005 alt-p/6, item no. 2 and guarantee/warranty shall be as per clause-8 of rdso spec. no. c-8703 rev.3, of april 2023. and spec rdso spec no. :c-8703 rev.3, of april 2023.

One coach set of air spring assembly (160 kn capacity) for main line/rajdhani lhb coaches for fiat type bogies as per rdso specification no. rdso/cg/s/23002, rev-1. scope of supply shall be as per specification rdso/cg/s/23002, rev-1 (each coach set will consists of four air spring assembly). packing instruction - mcf spi-042. (as) rdso item id: 3100341

Carbide drill dia 6 mm type 2010-6.00 make: -ifanger/applitec/bimu or equivalent.,boring tool type 440100-r-k10 make: - ifanger/applitec/ bimu or equivalent.,boring tool type mten 425060-r-k10, tool will be used for finish boring, length of finish boring 3.9,boring tool type mten 425100 r-k10, tool will be used for finish boring, length of boring 8.00 mm, n,multi function tool holder dr-mf-16r 2.25 d: 01 no. insert xcmt 080304-mf-ic908: 50 nos. screw so 30,90 degree eco cut multifunction tool, over all length 94 mm, shank dia 20mm. ecc 16r-2.25 d08 - qty:

Empty barrels of 210 lts capacity, grade a confirming to is 1783 (part 1): 1993 latest, triple/spiral seam construction for type 2 drums, type 2d, drums with strengthening corrugations on the body, minimum gross capacity 210 liters , nominal thickness of steel sheets- 1.25 mm, two screwed closures one of 50 mm and the other of 20 mm, body of drum shall be continuously resistant welded so as to provide air tight joint, internal protective coating & outer stove enamelled paint, internal phosphat

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender