Set Of T Bolt Assembly As Per Elw Drg. N [Set Of T Bolt Assembly As Per Elw Drg. No. Elw/Bsl/4/F64.022. One Consisting Of 3 Items 96 Nos.(32 Nos. Each) Note: T Bolt Head Length Should Be 22 Mm Instead Of 34 Mm And Bolt Head Curvature Should Be 2mm Instead Of 5.5 Mm.]

Particulars	Details
Title	Set Of T Bolt Assembly As Per Elw Drg. N [Set Of T Bolt Assembly As Per Elw Drg. No. Elw/Bsl/4/F64.022. One Consisting Of 3 Items 96 Nos.(32 Nos. Each) Note: T Bolt Head Length Should Be 22 Mm Instead Of 34 Mm And Bolt Head Curvature Should Be 2mm Instead Of 5.5 Mm.]
Description	For Complete Deion And Other Details, Please Refer To Tender
Organisation	Ministry of Railways \| Central Govt. Ministry/Department
Tender Id	106452831
Reference Number	56245707A
Tender Fee	0
EMD	0
Tender Value	-
Place	Mumbai CST
Link	View Original Tender Notice https://www.ireps.gov.in/ireps/supply/pdfdocs/092024/106452831/viewNitPdf_4691943.pdf
Start Date	August 26, 2024 17:24
End Date	Expired 16/09/2024 Expired 758 days ago Search Similar tenders?

Co110080642: m24x140 hex. head bolt- 10.9 is: 1364 & nut-10 is: 1364 with 2 washers is: 6649 drg: dcme/,co110080640: m24x120 hex. head bolt- 10.9 is: 1364 & nut-10 is: 1364 with 2 washers is: 6649 drg: dcme,co110080641: m30x160 hex. head bolt- 10.9 is: 3757 & nut-10 is: 6623 with 2 washers is: 6649 drg: cme 84

Co110080642: m24x140 hex. head bolt- 10.9 is: 1364 & nut-10 is: 1364 with 2 washers is: 6649 drg: dcme/,co110080640: m24x120 hex. head bolt- 10.9 is: 1364 & nut-10 is: 1364 with 2 washers is: 6649 drg: dcme,co110080641: m30x160 hex. head bolt- 10.9 is: 3757 & nut-10 is: 6623 with 2 washers is: 6649 drg: cme 84

Oil seal rubber 180 x 215 x 15 mm, sprng,bush,block plummer sn - 522,plummer block bearing block s 528,hex head bolt-2643,nut,hex head bolt - 0133,seal kit,potential transformer,new control panel assembly with up to 750ma,shaft with keys and sleeve nuts for 6 sta

Oil seal rubber 180 x 215 x 15 mm, sprng,bush,block plummer sn - 522,plummer block bearing block s 528,hex head bolt-2643,nut,hex head bolt - 0133,seal kit,potential transformer,new control panel assembly with up to 750ma,shaft with keys and sleeve nuts for 6 sta

1 head assembly,2 handle assembly,3 cylinder assembly,4 upper valve assembly,5 lower valve assembly,6 head-standard,7 handle standard,8 telescopic stand,9 normal stand,10 water tank,11 plunger rod,12 handle axle,13 third plate,14 connecting rod,15 socket seamless,16 bearing,17 hexagonal coupler m 12x1.75x50,18 hex. bolt m 12x1.75x40,19 hex. bolt m 12x2.0,20 hex. nut m 12x1.75,21 h.t. bolt m 10x1.75x40,22 nylock nut m 10x1.5,23 chain with coupling,24 axle washer,25 reducer cap,26 cast iron cylinder body,27 brass liner-short,28 plunger yoke body,29 plunger upper valve,30 bucket spacer,31 follower,32 check valve,33 check valve seat,34 rubber seat retainer,35 pump bucket,36 sealing ring,37 seating for upper valve,38 seating for lower valve

1 head assembly,2 handle assembly,3 cylinder assembly,4 upper valve assembly,5 lower valve assembly,6 head-standard,7 handle standard,8 telescopic stand,9 normal stand,10 water tank,11 plunger rod,12 handle axle,13 third plate,14 connecting rod,15 socket seamless,16 bearing,17 hexagonal coupler m 12x1.75x50,18 hex. bolt m 12x1.75x40,19 hex. bolt m 12x2.0,20 hex. nut m 12x1.75,21 h.t. bolt m 10x1.75x40,22 nylock nut m 10x1.5,23 chain with coupling,24 axle washer,25 reducer cap,26 cast iron cylinder body,27 brass liner-short,28 plunger yoke body,29 plunger upper valve,30 bucket spacer,31 follower,32 check valve,33 check valve seat,34 rubber seat retainer,35 pump bucket,36 sealing ring,37 seating for upper valve,38 seating for lower valve

1 head assembly,2 handle assembly,3 cylinder assembly,4 upper valve assembly,5 lower valve assembly,6 head-standard,7 handle standard,8 telescopic stand,9 normal stand,10 water tank,11 plunger rod,12 handle axle,13 third plate,14 connecting rod,15 socket seamless,16 bearing,17 hexagonal coupler m 12x1.75x50,18 hex. bolt m 12x1.75x40,19 hex. bolt m 12x2.0,20 hex. nut m 12x1.75,21 h.t. bolt m 10x1.75x40,22 nylock nut m 10x1.5,23 chain with coupling,24 axle washer,25 reducer cap,26 cast iron cylinder body,27 brass liner-short,28 plunger yoke body,29 plunger upper valve,30 bucket spacer,31 follower,32 check valve,33 check valve seat,34 rubber seat retainer,35 pump bucket,36 sealing ring,37 seating for upper valve,38 seating for lower valve

1 head assembly,2 handle assembly,3 cylinder assembly,4 upper valve assembly,5 lower valve assembly,6 head-standard,7 handle standard,8 telescopic stand,9 normal stand,10 water tank,11 plunger rod,12 handle axle,13 third plate,14 connecting rod,15 socket seamless,16 bearing,17 hexagonal coupler m 12x1.75x50,18 hex. bolt m 12x1.75x40,19 hex. bolt m 12x2.0,20 hex. nut m 12x1.75,21 h.t. bolt m 10x1.75x40,22 nylock nut m 10x1.5,23 chain with coupling,24 axle washer,25 reducer cap,26 cast iron cylinder body,27 brass liner-short,28 plunger yoke body,29 plunger upper valve,30 bucket spacer,31 follower,32 check valve,33 check valve seat,34 rubber seat retainer,35 pump bucket,36 sealing ring,37 seating for upper valve,38 seating for lower valve

1 head assembly,2 handle assembly,3 cylinder assembly,4 upper valve assembly,5 lower valve assembly,6 head-standard,7 handle standard,8 telescopic stand,9 normal stand,10 water tank,11 plunger rod,12 handle axle,13 third plate,14 connecting rod,15 socket seamless,16 bearing,17 hexagonal coupler m 12x1.75x50,18 hex. bolt m 12x1.75x40,19 hex. bolt m 12x2.0,20 hex. nut m 12x1.75,21 h.t. bolt m 10x1.75x40,22 nylock nut m 10x1.5,23 chain with coupling,24 axle washer,25 reducer cap,26 cast iron cylinder body,27 brass liner-short,28 plunger yoke body,29 plunger upper valve,30 bucket spacer,31 follower,32 check valve,33 check valve seat,34 rubber seat retainer,35 pump bucket,36 sealing ring,37 seating for upper valve,38 seating for lower valve

1 head assembly,2 handle assembly,3 cylinder assembly,4 upper valve assembly,5 lower valve assembly,6 head-standard,7 handle standard,8 telescopic stand,9 normal stand,10 water tank,11 plunger rod,12 handle axle,13 third plate,14 connecting rod,15 socket seamless,16 bearing,17 hexagonal coupler m 12x1.75x50,18 hex. bolt m 12x1.75x40,19 hex. bolt m 12x2.0,20 hex. nut m 12x1.75,21 h.t. bolt m 10x1.75x40,22 nylock nut m 10x1.5,23 chain with coupling,24 axle washer,25 reducer cap,26 cast iron cylinder body,27 brass liner-short,28 plunger yoke body,29 plunger upper valve,30 bucket spacer,31 follower,32 check valve,33 check valve seat,34 rubber seat retainer,35 pump bucket,36 sealing ring,37 seating for upper valve,38 seating for lower valve

Chain with flight bar assembly consisting of a chain 26x92x210 links confirming to is din 22252 or equivalent bis standard 02 nos., b flight bar 35 nos part no 317015 or equivalent,chain connector suitable for chain 26x92 02 nos. for l and t feeder breaker, part no 31705 or equivalent drawing enclosed,t head bolt for l and t feeder breaker, part no 31702 or equivalent drawing enclosed,nylock nut for l and t feeder breaker, part no 31703 or equivalent drawing enclosed,sprocket for drive shaft for l and t feeder breaker, part no 31661a or equivalent,sprocket for tail end shaft for l and t feeder breaker, part no 31641a or equivalent,sliding bearing block assembly for tail end shaft without bearing. suitable for bearing no23124cc for l and t feeder breaker, part no 31663 or equivalent,drive shaft assembly complete with sprockets, shaft, bearing, bearing block, distance piece etc. in assembled condition for l and t feeder breaker, part no 3164 or equivalent,tail shaft assembly complete with sprockets, shaft, bear

Chain with flight bar assembly consisting of a chain 26x92x210 links confirming to is din 22252 or equivalent bis standard 02 nos., b flight bar 35 nos part no 317015 or equivalent,chain connector suitable for chain 26x92 02 nos. for l and t feeder breaker, part no 31705 or equivalent drawing enclosed,t head bolt for l and t feeder breaker, part no 31702 or equivalent drawing enclosed,nylock nut for l and t feeder breaker, part no 31703 or equivalent drawing enclosed,sprocket for drive shaft for l and t feeder breaker, part no 31661a or equivalent,sprocket for tail end shaft for l and t feeder breaker, part no 31641a or equivalent,sliding bearing block assembly for tail end shaft without bearing. suitable for bearing no23124cc for l and t feeder breaker, part no 31663 or equivalent,drive shaft assembly complete with sprockets, shaft, bearing, bearing block, distance piece etc. in assembled condition for l and t feeder breaker, part no 3164 or equivalent,tail shaft assembly complete with sprockets, shaft, bear

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

For complete deion and other details, please refer to tender

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

For complete deion and other details, please refer to tender

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

For complete deion and other details, please refer to tender

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

For complete deion and other details, please refer to tender

Tender Details

Tender Support

Oil seal rubber 180 x 215 x 15 mm, sprng,bush,block plummer sn - 522,plummer block bearing block s 528,hex head bolt-2643,nut,hex head bolt - 0133,seal kit,potential transformer,new control panel assembly with up to 750ma,shaft with keys and sleeve nuts for 6 sta

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

Set of t bolt assembly as per elw drg. n [set of t bolt assembly as per elw drg. no. elw/bsl/4/f64.022. one consisting of 3 items 96 nos.(32 nos. each) note: t bolt head length should be 22 mm instead of 34 mm and bolt head curvature should be 2mm instead of 5.5 mm.]

Get customized tender Recommendations for your Enterprise