The nitinol core coronary wire - width should be 0.014 in diameter and length of 180 cm or more. the tip weight should be less than one gram. should have hydrophilic coating. should have 1:1 torquability. should be compatible with dock extension wire

Crepe bandage 15cm x 4mtrs made of cotton with rayon, with fast edges, hypo allergic, with ce & iso certification, metal clips to be provided.

Hq_med_sur_[ph.no.272005] cotton bandage cloth non sterilized. the cloth should be woven in plain weave with well formed selvedge and free from filling, stitching or dressing material defects. it should be bleached to good white as per is.863:1988. width of 100 cm, supply in metres.

1) breathable impervious surgical gown should be an intelligent and high-performance gowna made up of 60-gsm light weight trilaminate material. gown should provide full imperviousness to blood-borne pathogens and should meet thea standards set by aami pb70, astm f1671, and en 13795. breathable membrane should reactsa to body temperature changes, to enhance water vapor transmission for wearer comfort.a gown should be available in xl (130 cm), xll (150 cm), and 2 xll (150 cm) with raglan sleeves

One piece femoral adult arterial cannula. 1) it should have a micro-port tips, made of a one piece material and kink resistant 2) cannula length 17 inche(43.2 cm) overall length with 7.1 in(18 cm) tip it should offer a high flow rate with minimal pressure differntial. 3) cannula should have a introducer along with depth markings to precise the position of the cannulae.should be vented 3/8 in(0.95 cm) connector. size 19 fr biomedicus. cat no.96570 - 019.

Rigid tape,dynaplast,athletic tape 3.8 cm,micopore box 1,micropore box 2,ultrasound gel bottle 250 ml,kinesio tape 600 cm x 5 cm,tape removal spray,surgical spirit 100ml,diclofenac spray 200 ml,cold spray,cotton roll 500 gms.,underwrap roll,dry needles 25mm x 0.25mm,dry needles 50mm x 0.25mm,dry needles 40mm x 0.25mm,dry needles 75mm x 0.25mm,professional cupping therapy set,cohesive elastic bandage 50mm width,cohesive elastic bandage 100 mm width,textile ice bag multi color 9 large,medical examination glove box of 100 pcs,medical examination glove box of 100 pcs,dynamic tape - 5m x 5cm,diclofenac gel 100 mg,crepe bandage - small,crepe bandage - medium,crepe bandage - large,disposable full size bed sheet packet,physio field runner bag,pre tape spray,kinesiology tape scissors large size,magic spray instant cooling spray,butterfly stitches box of 50 pcs,butterfly stitchesbox of 50 pcs,antiseptic dry powder spray betadine,sterile gauze swab pack of 4 x 10,hand sanitizer- 200ml,soft cervical coller,soft cervical

Intubating catheter/bougie 14 french 70 cm long - (1) it should facilitate endotracheal intubation in patients when visualisation of the glottis is inadequate. (2). introducer should be a 14 french 70 cm long radio opaque catheter for adults (3). the tip should be blunt and angled to assist in proper placement beyond the vocal cords and to minimise trauma to internal structures. (4). should have 2 removable adapters to permit ventilation. one with a 15mm adapter to connect to ventilating circu

Thermal tickets rolls of 500 each for un-reserved ticketing system as per attached specification with tender. masking tape/ paper tape used for joining plane white paper at the end of last ticket shall be affixed on the front side of the ticket roll in such a manner that the black mark on behind of the ticket does not get over lapped tape should not cover ticket more than 5 mm. (paper width- 81mm+/- 1mm, paper length- 90mm+/- 1mm, printable width- 77mm+/- 1mm, printable- 86mm+/- 1mm and paper

Disposable rotatable rat tooth forceps should have 1. rat tooth / alligator jaw with opening width of 3.8 mm to 7.2 mm and compatible with 2.8 mm instrument channel. 2. firm grip & easy movould be available with rotatable graspers. 3. shaft length more than 160cm and jaw opening from 11.3mm to 14.9mm. 4.should be made of medical grade stainless steel with ptfe

Reducing nipple of size 1/2 x 3/8 bsp threading (parallel) on both sides, total length - 40mm; 1/2 threaded length -15 mm; 3/8 threaded length-15mm, hex. head thickness-10mm, width af27mm, 3/8 ends inside should have tapered profile (cone type). material: carbon steel astm-a108 & grade a1018 with zinc coated. note: material should be machined from forged planks & not to be casted.