1. machined washer a25 as per drg.no. is:2016-67 table-1, coating as per mdts-057, packing instruction - pi042 as per drg.no. is:2016-67 table-1, coating as per mdts-057 specn: is:2016-67 table-1, coating as per mdts-057 2. set of punched washers for fiat bogie consisting of 03 items. item no.1. punched washer a14 (16nos)- is:2016-1967, material steel to is:2062, coating as per mdts-057.,item no.2. punched washer a18 (32 nos.)- is:2016-1967, material steel to is:2062-2011 reaffirmed 2021, coat

Hex. nut m30 conforming to is 136464(part 3):2002. is 1367 (part 6):2002,10. mdts-057 (rcf pl no.1:33670511) specn: to is 136464(part 3):2002. is 1367 (part 6):2002,10. mdts-057

Set of split pins for icf bogie consisting of 04 items- 1. split pin 4x22, as per is:549-2005 st34 coating as per mdts-057 qty. -16 nos. 2. split pin 5x56 as per is: 549-2005, st-34, coating as per mdts-057 qty.- 16 nos. 3. split pin iso 1234-8 x 45-st. to icf drg. no. ts/mc-0-1-001 alt h, item no. 22, iso 1234 8x45-st is:549/2005 qty. 12 nos. 4. split pin 10x63 as per is:549-2005 st34 coating as per mdts-057 qty. 16 nos.

Set of washers for fiat bogie consisting of 11 items (1) plain washer a9 to rcf drawing no. lihw09 alt-b, item 04 and to spec is: 2016-1967, steel, coating as per mdts-057, quantity- 16 nos. (2) plain washer a11 to rcf drawing no. lihw09 alt-b, item-07 and to spec is: 2016-1967, steel, coating as per mdts-057, quantity -24 nos. (3) spring washer b12 to rcf drawing no. lihw09 alt-b, item-22 and to spec is: 3063-1994, coating as per mdts-057, quantity -40 nos. (4) punched washer a18 to rcf drawi

Hex head bolt m16x70 (high tensile) confirming to is 1364(part-1) 2023, is:1367-2017,pt-iii, with property class-10.9,ce and coating as per rcf spec no. mdts-057.

Hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles

Hex. head screw m 24x100(h.t) for lhb/fiat bogie. specification no. :- rdso/cg/s/24005 _ rev. nil for screw is: 1364 (pt.2)/2023(sixth rev.) with property class-10.9 to is:1367 (pt.-3)/2017 (fifth rev.),ce, coating as per rcf/mdts-057

[1] hex head bolt with nylock nut size-m27x130mm is:1364-2002/p.c 8.8 [2] hex head bolt, gr 10.9, m16 x 50mm x 1.5p with helicoil thread insert 16x1.5px1.5d.

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Set of hardware items for secondary suspension of 3 phase locos consisting of 07 items with zinc coating as follows. (1) socket head screw m12 x 25mm as per is:6761/1994 & 12.9 pc, qty/ set- 04 nos, (2) hex head screw m12 x 20mm as per is:1364/1367 & 8.8 pc qty/set-04 nos, (3) hex h ead bolt m16 x 20mm as per is:1364/1367 & 8.8 pc-qty/set-04 nos, (4) hex head bolt m20 x 60mm as per is:1364/1367 & 8.8 pc percent u2013 qty/set -08 nos, (5) hex head bolt m20 x 80mm as per is:1364/ 1367 & 8.8 pc-