Hydraulic hose id - 1 x 48 long with ctype female fitting both end of 1 , working pressure-88 bar/1275 psi confirming to sae100r1.

Hose reel pipe, size-15 meter,max. pressure 300 psi,

Hydraulic pressure hose no.12 sae 100 r2 with maximum working pressure 215 bar and minimum bursting pressure of 860 bar in 25mtrs each in running length, acceptable make: parker, aeroquip, polyhose, aeroquip/ eaton aeroquip, eaton winer only.

Rubber hose pipe id 25 mm, length 30 meter fitted with both side female coupling and o ring suitable for fitting bp / fp hose of coach & working air pressure 14 kg /sq cm (coach bypass pipe), detailed specification as per annexure a .

Hp hose 1/4 inch bsp swivel fitting at both ends ,length 15 meter ,

High pressure single wire braided flex hose no. 32 with end fitting to blw drg. no: 40c77437-5 alt - f.

316l ss hp double ended cylinder, capacity 500cc, hydrotest pressure 3050psig(210bar),316l ss hp double ended cylinder, capacity 500cc, hydrotest pressure 5000psig(344bar),316l ss hp double ended cylinder, capacity 1000cc, hydrotest pressure 3050psig(210bar),ss 316 qtm4 series quick connect stem, 1/4 male npt,ss 316 qtm2 series quick connect , 1/4 male npt,ss 316 qf series quick connect body,ss 316 qf series quick connect stem,ss 316 nd series integral bonnet non-rotating stem needle valve 1/4 mnpt x 1/4 fnpt,ss 316 tm series rupture disk tee,ss 316 ndh series integral bonnet non-rotating stem needle valve 1/4 male & female npt,ss 316 ndh series integral bonnet non-rotating stem needle valve 1/4 female npt,ss 316 nd series integral bonnet non-rotating stem needle valve containing kalrez orings,ss outage tube adapter, 20 tube volume,ss outage tube adapter, 40 tube volume,ss 316 pipe fitting, hex nipple, 1/4 male npt,ss 316 pipe fitting, hex coupling, 1/4 female npt,ss 316 pipe fitting, adapter

High pressure hose pipe size 5/16 inch, length15 meters long with connector (both sides end fittings) end fittings with o ring type straight with 27 a/f nut both sides suitable for water jets.

Rubber air hose - nominal bore 12.5mm, braided with synthetic fibre reinforcement in lengths of 15mtrs, working pressure of 1.0 mpa to is: 446- 2025, type 1.

Pneumatic tool hose rubber (having id-12.5 mm and od-21.5 mm maxm.) two layer rayon braided conforming to specifcation is-446 type-iii minimum bursting pressure 56 kg/cm2, acceptable make: plasser, dunlop, indomaksson, pix, polyhose only.