Similar Tenders

• Ercp high performance guide wire diameter varying from 0.018 inch, 0.025 inch, 0.032 inch, 0.035 inch. minimum 450cm length, made up of nitinol. should have hydrophilic angled or striaght tip of length 10cm.

  For complete description and other details, please refer to tender document.

  Ministry of Railways Closes 09/11/2026

  View tender →

• Y connector push pull type of haemostatic valve made of metal plastic or metalized composite to allow single handed manipulation to open and close the valve while introducing devices into the vasculature. should accommodate up to 9fr devices. should have side arm with fixed extension tubing and three way stopcock with torquer and insertion needle

  For complete description and other details, please refer to tender document.

  Ministry of Railways Closes 30/11/2026

  View tender →

• 3 tesla mri conditional combo-device crt-d (df-4) with quadripolar lv lead & accessories spec: 1. pacing mode - dddr, ddd, ddir, ddi, ddt, door, vdd, vvir, vvi, vvt, voo, ovo, voor, aai, aair, aat, aoo, oao, aoor. 2. should be capable to have anti trachycardia pacing (atp). 3. should deliver shock with percent u2265 35 joules. 4. endocardial electrodes: a) right ventricular with shock coils. (i) steroid eluting or coated electrode. (ii) polyurethane & (iii) must be negotiated with 7f or less

  For complete description and other details, please refer to tender document.

  Ministry of Railways Closes 17/11/2026

  View tender →

• Endomechanical instruments accessories for existing energy device diathermy it should be campatible

  Department of Higher Education | Ministry of Education Closed 26/11/2024

  View tender →

• Dvt pump - sequential compression device should have display that shows actual pressure delivered t

  Department of Atomic Energy | PMO Closed 30/07/2025

  View tender →

• Interlocking nail tibia 9mm x 300mm with 4 locking bolts. specifications- 1 should be made up of medical grade titanium 2 nail should have anatomical anterior femoral bow 3 nail should have four proximal locking and three distal locking options 4 screws should be self-tapping 5 company should provide the tibia nail and locking bolts six in number of various length as per requirement 6 implant should have jig for the distal locking screws 7 firm should provide the technical assistance a

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Mumbai CST Closed 06/11/2024

  View tender →

• Led light source. specification (1) light bulb-should have led source (2)luminous flux-should have 2800im (3) color temperature- should be 6500k (4)lamp hours-should be 30000h (5)brightness- should be 0 - 100 percent (6)power-should be 94 - 240v (7)weight-should be ergonomic (8)intensity-should have bright light. (9) accesories-should be supplied with light cable. (10) other features-should have low noise, precision design, cool & safe device.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 19/06/2024

  View tender →

• (i)all inside curved meniscus repair system for repairing meniscus tear, it should have depth limiter, active deployment, pre knotted 2 peek implants with suture, should be able to rotate freely depending upon the tear usfda approved (ii) adjustable femoral cortical suspension device having titanium button & ultrahigh molecular weight polyethylene loop . device should have adjustable loop & can be adjusted ranging from 10-100mm usfda approved (iii)interference bio screw having size 9mm x 25mm

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Bilaspur Closed 27/08/2025

  View tender →

• Titanium tibial interlocking nail any size,with four locking bolts 1.should be made up of titanium with three proximal and two distal locking bolt 2. set of one nail(expert type with tip locking option) and 5 bolt (of any length and diameter) 3.nail should have jig for the distal locking 4.firm should supply all implants and instrumentation of various sizes at the time of surgery along with technical assistance 5.firm should be reputed with long term market standing

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Mumbai CST Closed 26/12/2024

  View tender →

• Tibia nail should have following specifications nails (i)should be able to use as expert tibia nail as well as suprapatellar nail. (ii)cannulated nails 8-11 mm for reamed & un-reamed technique enabling nail ion over guidewire.(iii) titanium alloy. titanium grade 23 (ti 6al-4v eli) preferable. (iv)the nail should allow compression of 7mm through proximal hole. (v) distal locking options should have two mediolateral screws, two oblique locking screw options. (vi) proximal locking opt

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 19/02/2025

  View tender →