Steel wire rope dia 20 mm

The nitinol core coronary wire - width should be 0.014 in diameter and length of 180 cm or more. the tip weight should be less than one gram. should have hydrophilic coating. should have 1:1 torquability. should be compatible with dock extension wire

Galvanised steel wire rope dia 3mm having construction 6x19(12/6/1) wsc-1770 as per is: 3459/1977 tab-2, galvanised as per is:1835/1976 type-b .

Pvc flexible pipe dia 3/4 x 1/8 wall thickness

Bright steel wire rope 8mm dia with fibre core 120kg 2m to 180kg 2m,wire rope 12mm construction 6x36 rh lay,wire rope 10mm construction 6x36 lh lay,wire rope 20mm dia construction 6 x 36 rh lay fibre core is 2266 1989,wire rope 6mm dia construction 6 x 36 rh lay fibre core us 2266 1989,wire rope 18mm lh lay fibre core construction 6x36 or 6x37 with steel core length 100m dia 18mm,wire rope 16mm 6 37 const fiber tensile strength dia 16mm construction 6 37 fibre core rh lay 1770n mm2 approx mass 88.6

Modified steel wire rope sling of 15 swl [modified steel wire rope sling of 15 swl capacity to drg no. dme/dsl/ed-m-666. note : test certificate to proof load (twice swl) should be furnished from a govt approved test house.]

Pvc soft rubber tubing 8mm diameter, unsterile used for suction. should be 25 meter length in a single pack, pvc soft rubber tubing 6mm diameter, unsterile used for suction should be 180 meter length in a single pack

Stainless steel wire rope for 3:1 ratio regulating equipment 8.0 mtrs length & dia 8.65 mm.

Wheel disc for neral-matheran ng coacheswheel disc for neral-matheran ng coaches, size- tread dia-476 mm, bore dia-53 mm, root radius of the flange should be 15.5 mm. thickness of the wheel flange should be 24 mm. height of the flange should be 22 mm. conforming to kwv/sketch-1006 and mlr drg. no. la-67. for any contradiction between the sketch and the drawing, sketch no. kurdu/sketch-1006 shall prevail to the extent of contradiction only in light of size in description. material specification

Wire wound resistor 4.7 ohms 1000w, size 50 mm outer dia and resistor length 380 mm with suitable fixing clamp item to be supplied along with fixing clamps. height of fixing clamp should beabove 35 mm.