Tender Details
About Tender
🚂 Procurement Opportunity: Spares Nozzles For Cutting Blow Pipe 🛠️ The Ministry Of Railways, Specifically The Central Government Ministry/Department, Is Issuing A Call For Tenders For Spares Nozzles For Cutting Blow Pipes With A Thickness Range Of Metal From 50 Mm To 100 Mm. These Nozzles Must Conform To The Indian Standard Is: 7653/1975 (Reaffirmed 2008) And Be Of Type A With A 1/16 Inch Low Pressure Design. 📅 Bid Submission Deadline: May 08, 2024, 11:30 Am Interested Bidders Are Requested To Refer To The Tender Document For Complete Details And Specifications. Submissions Should Be Made Without Any Tender Fee Or Earnest Money Deposit (Emd). Keywords: Spares Nozzles, Cutting Blow Pipe, Indian Standard, Ministry Of Railways, Central Government, Tender, Procurement, Gorakhpur| Particulars | Details |
|---|---|
| Title |
Spares Nozzles For Cutting Blow Pipe Thickness Range Of Metal 50 Mm To L00 Mm Conforming To Is: 7653/1975 (Reaffirmed 2008) Type A, 1/16 Inch Low Pressure.
|
| Description |
For Complete Deion And Other Details, Please Refer To Tender
|
| Organisation | Ministry of Railways | Central Govt. Ministry/Department |
| Tender Id | 106320549 |
|
Reference Number |
28230634 |
| Tender Fee | 0 |
| EMD | 0 |
| Tender Value | |
| Place | Gorakhpur |
| Link | https://www.ireps.gov.in/ireps/supply/pdfdocs/052024/106320549/viewNitPdf_4542001.pdf |
| Start Date | April 17, 2024 23:33 |
| End Date |
08/05/2024 ( Expired 370 days ago ) Search Similar tenders? |
|
Join for More Relevant Opportunities |
Prov. and laying of 4 inch i/d di w/s pipe line to overcome the problem of low pressure from h.no.1285 to 1296/1 sec.30b chd under the charge of sde mcph 16 chd.
Prov. and laying of 4 inch i/d di w/s pipe line to overcome the problem of low pressure from h.no.1285 to 1296/1 sec.30b chd under the charge of sde mcph 16 chd.
Read more1/2 inch nylon braided air blow pipe. working pressure: 16 kgs/squre centimeter. inner dia: 1/2 inch. note: 1. valid warranty certificate from the oem to be supplied along with the material. 2. manufacturing date to be mentioned on the material body at different places.
For complete deion and other details, please refer to tender
Read moreBrake pipe 15 mm bore, 1316 mm long, black steel heavy duty seamless as per is:1239, part-1/2004 (reaffirmed 2015) with amdt-6 of june-2021, table-5 clauses 8.1 & 8.1.1 for bg main line coaches (with bogie mounted brake cylinder) to rdso sketch-98036, alt-1, item-3 and conforming to rdso spec. no. 04-abr-2019 (rev-02 of dec 2019)
For complete deion and other details, please refer to tender
Read moreFabrication & supply of 11200 mm o/r (curved) fan shaped switches for 1 in 16, t/out for bg 60 kg (uic) on psc sleepers to rdso drg. no. t-5692
For complete deion and other details, please refer to tender
Read morePressure booster pump 0.5 hp, 230 volt, single phase, flow rate 34-7 lpm, frequency-50/60 hz, discharge 2000-4000 lph, head range 6-24 mtr, pipe size 25x25 mm, impleller material- brass, copper winding, float type switch, accepted make crompton, kirloskar, havells, cri pumps or similar.
For complete deion and other details, please refer to tender
Read moreHot forged steel rivets for hot closing (snap head type) confirming to is: 1929/1982 (reaffirmed 1996) with amdt. 1 & 3 material as per is: 1148/1982 (reaffirmed 1997) size 16 x 50 mm...
For complete deion and other details, please refer to tender
Read moreThermoplastic textile reinforced water hose size: 20 mm x 15 mtrs. long to specn.is:12585-88 reaffirmed in 2018 or latest type-2 [re-inforcement-synthetic textile cover smooth finish] note: 1] the water hose shall be warranted for a period of 18 months from the date of delivery at depot. 2] material should be flexible to in respective pipe joints and to tight hold the conventional worm drive clips to is:4762/2002 or latest. 3] colour of water hose yellow/black. 4] manufacturer s
For complete deion and other details, please refer to tender
Read moreCutting blow pipe of nozzle mixing techn [cutting blow pipe of nozzle mixing technology, mixing of gases in three seat nozzle only.ss filter at inlet (oxygen), angle head forged from brass rods for much stronger and longer life . ss tube for oxygen and fuel gas, metallic knobs, better grip, lower fatigue for operator, cutting capacity 300 mm, length of torch 450mm, angle head 90 degree with 1 no. 1/16 pnme lpg cutting nozzle & 1 no. 3/32 pnme lpg cutting nozzle make esab/ victor/smith. ]
For complete deion and other details, please refer to tender
Read more(1) hh bolt of length 55 mm, dia 16 mm, pitch 2 mm, full threaded, along with suitable 2 flat washer, 1 spring washer & 1 nut, grade 8.8, zinc coating, qty/set-1 no. (2) hh bolt of length 50 mm, dia 8 mm, pitch 1.25 mm, half threaded, along with suitable 2 flat washer, 1 spring washer & 2 nuts, grade 8.8, zinc coating, qty/set-1 no. conforming to is: 1364 for bolts & nuts, is: 2016 for flat washer & is: 3063 for spring washer. note: one sample should be got approved before effecting bulk
For complete deion and other details, please refer to tender
Read moreof your Industry type