High pressure hose pipe size 5/16 inch, length15 meters long with connector (both sides end fittings) end fittings with o ring type straight with 27 a/f nut both sides suitable for water jets.

Jaguar pump 50kg_part no.335050,pneumatic lower repair kit_part no.344555,pneumatic motor repair kit_part no.344666,injector cap and o ring_part no.400128,pneu solenoid valve_part no.350006,3000mm hose with stud both side_part no.530042,follower plate_part no.350503,level indicator rod_part no.350504,fm-01 injector_part no.400100,2 bank injector with manifold_part no.400117,3 bank injector with manifold_part no.400118,4 bank injector with manifold_part no.400119,zerk fitting_part no.400127,pneu vent valve_part no.400400,pneumatic vent valve repair kit_part no.400475,lubrication controller lc-02_part no.400702,1700mm hose with stud both side_part no.530041,polyamide hose 8.4mm od-4mm id_50m_part no.801001,1500mm hose with stud both side_part no.530043,1400mm hose with stud both side_part no.530044,8000mm hose with elbow and swivel nut_part no.530045,hose stud_part no.600004,hose sleeve_part no.600005,ddr_part no.600013,pressure gauge_0-400 bar_part no.600016,spray valvebynozzel_part no.600041,elbow we 1by8m np

Hose connection 3/8 x 1600 mm long to icf drg no icf/sk-3-5-517,alt-u/18 item no 2 .both end should be swivel end with three nylon washers to icf drg no icf/sk-3-5-263, alt-nil, item no 3.

Flexible reinforced high pressure rubber hose pipe for vcb having embedded steel wire braiding od- 17.5 mm, id -8 mm, length- 730 mm, end fitting provided with 3/8 inch metallic swivel nut both end. the metallic nut shuld confirm to is-226 g.i. coated sae - 100ri specification :- as per description

Pipe water g. i. 1/2” medium quality conforming to is: 1239 (part-i) (weight should be 1.22 kg per met,pipe water g. i. 3/4” medium quality conforming to is: 1239 (part-i) (weight should be 1.58 kg per met,pipe g. i. 1 inch (25 mm) medium quality conforming to is: 1239 (part-i) screwed at both ends, pipe th,g. i. pipe 40mm dia medium weight, screwed at both end socket at one end and other end protected with,pipe g. i. size 2” medium quality confirming to is: 1239 (part-i) 1980, threaded at both end socketed,a set of 1/2” gi fittings consist of nipple 1/2” x4” -75 nos. , socket-50 nos, elbow-50 nos. , union-50,a set of 3/4 gi fittings consist of socket-50 nos, . elbow-50 nos. , nipple 3/4” x4” -75 nos. , union–,a set of 1” gi fittings consist of socket-75 nos, . elbow-75 nos. , nipple 1” x4” -75 nos. , union– 50

Gi socket, 15 mm, heavy class, is 1239,gi equal tee, 15 mm, heavy class, is 1239,gi plug male threaded,braided flexible connection hose,stainless steel sink waste coupling,shower head along with arm,acrylic exterior emulsion weather-proof paint minimum 4yr life 20 l bucket,abs bathroom shelf,stainless steel curtain bracket,stainless steel curtain rod, 25 mm dia 10 feet long,gun metal gate valve, 20 mm, is 778,gun metal gate valve, 25 mm, is 778,stainless steel towel rail, 600 mm,u clamp for 15 20 25 mm pipe,white cement based putty 20kg bag,white cement 1 kg pack,ordinary portland cement,pvc low level flushing cistern,ptmt angel valve,ptfe thread seal tape,brass spindle for 15 mm stop cock,upvc plain socket,upvc tank connector nipple,upvc union,synthetic enamel paint,acrylic distemper 20l bucket,stainless steel door handle,upvc solvent cement,black phosphated self tapping screws,paint brush,synthetic fabric paint roller,cp health faucet,cp jet spray,brass nrv 25 mm,gi nipple,float valve,male threaded adaptor,

Supply of transverse cross bond made of ms flat of size 40?6 mm, suitable for glued joints in crossover track-circuited areas, as per rdso drawing no. eti/ohe/g/05251, with holes at both ends and complete with gi bolts of size 16?50?38 mm along with nuts, spring washers and flat washers; and cross/transverse bond and special bond fabricated from ms (mild steel), complete with ms flats duly painted with one coat of red oxide primer and finished with black paint, suitable for ohe bonding and ret

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4),(vitreous china) - washdown water closets as per is 2556,cp brass waste coupling 40 mm,gi nipple 20 mm x 100 mm,fevicol 1 kg in pack,cast brass float valve 15 mm with ball and rod complete,cast brass valves plunger type 20 mm,ewc single piece vitreous china ware complete,mild steel sliding door bolt cllpt type 300 mm long, rod not less than 16mm dia, isi marked,paint synthetic enamel smoke gray first quality in 04 ltr container,gi tee 25 mm,stainless steel butt hinges size 75 mm,ptmt waste coupling 32 mm,gi socket 15 mm,cp brass extention nipple for 15mm bore 65mm long,cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm,ss plate rack 24 inch x24 inch x10 inch,synthetic enamel paint of black colour.,polish fre

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4),(vitreous china) - washdown water closets as per is 2556,cp brass waste coupling 40 mm,gi nipple 20 mm x 100 mm,fevicol 1 kg in pack,cast brass float valve 15 mm with ball and rod complete,cast brass valves plunger type 20 mm,ewc single piece vitreous china ware complete,mild steel sliding door bolt cllpt type 300 mm long, rod not less than 16mm dia, isi marked,paint synthetic enamel smoke gray first quality in 04 ltr container,gi tee 25 mm,stainless steel butt hinges size 75 mm,ptmt waste coupling 32 mm,gi socket 15 mm,cp brass extention nipple for 15mm bore 65mm long,cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm,ss plate rack 24 inch x24 inch x10 inch,synthetic enamel paint of black colour.,polish fre

Entry and mid level desktop computer,antifoaming agent for treatment of stp water,ci sluice valve 300 mm dia bore,gm gate valve 40 mm bore,timer switch with clock,pvc water storage tank 500 ltrs,gi pipe medium grade 15 mm dia bore,gi pipe meduim grade 50 mm dia bore,water meter 80 mm bore,ci foot valve 100 mm dia,water level indicator digital,ci foot valve 200 mm dia,submerssible cable 4 sq mm 3 core copper conductor1100 volts grade,float valve with epoxy coated aluminium rod and high density ball 15 mm,gun metal hydrant valve 63mm,float valve with epoxy coated aluminium rod and high density ball 50mm,gi socket med grade 80mm,brass nozzle 63 mm dia,ci non return valve 100 mm dia,ms flange 100 mm dia bore,lead pig bar,submerssible cable 2.5 sq mm 3 core copper conductor1100 volts grade,self closing taps copper alloy, chromium plated 20 mm,ci foot valve 150 mm dia,float valve with epoxy coated aluminium rod and high density ball 25 mm,ci butterfly valve 80 mm dia,rubber hose real of 20 mm dia,single phase preve