The nitinol core coronary wire - width should be 0.014 in diameter and length of 180 cm or more. the tip weight should be less than one gram. should have hydrophilic coating. should have 1:1 torquability. should be compatible with dock extension wire

Wire wound resistor 4.7 ohms 1000w, size 50 mm outer dia and resistor length 380 mm with suitable fixing clamp item to be supplied along with fixing clamps. height of fixing clamp should beabove 35 mm.

1) breathable impervious surgical gown should be an intelligent and high-performance gowna made up of 60-gsm light weight trilaminate material. gown should provide full imperviousness to blood-borne pathogens and should meet thea standards set by aami pb70, astm f1671, and en 13795. breathable membrane should reactsa to body temperature changes, to enhance water vapor transmission for wearer comfort.a gown should be available in xl (130 cm), xll (150 cm), and 2 xll (150 cm) with raglan sleeves

Water flow meter, mechanical with calib [ water flow meter, mechanical with calibration certificate from nabl lab, is:2373 or latest, size - 50mm. least count - 10 liter, water meter should be enclosed typewith brass body cover with mettalic gears]

Digital clamp on earth tester with automatic self-calibration, jaw capacity 32 mm, 4 digit lcd display with 47 x 28.5 mm in lenth. automatic range selection and 0.1 ohm to 100 ohm resistance measurement range. the equipment shall be possible to measure the earth resistance value without any connection lead .make - kusum, meco,htc ,fluke etc

Supply of contact wire parallel clamp (small) part no. 1041-2 complete with fasteners as per rdsos spec. no. ti / spc / ohe / fittings/0130- (10/13) rev-1 and rdsos drawing no. eti/ohe/p/1040-2 reve or latest. material must be procured from core/rdso approved vendors or their authorised representatives. the authorization letter from core/rdso approved vendor, submitted with the offer should be tender specific. (drawing attached)

Resistance 4.7 ohms,1000 watt as per drawing no. mei/w- wres/26122017-12 with inverted clamp height of 100 mm and suitable for fixing in existing panel board of size 400 x 250 mm as per clw specification no.clw/es/c-47/1 suitable for rc damping panel for auxiliary winding for transformer. the material must be of following make ; escol, vepl, pec, sur , kiyosh or equivalent manufacturers name and manufacturing month & year should be clearly mentioned on material.

Aerosol spray paint, colour siemens greyaerosol spray paint, colour siemens grey matt, net volume - 400 ml can, net weight -300 g. gloss angle of 25 to 60 deg, drying time 3 - 5 minutes, dust free 10 - 15 minutes, tough dry 2 hours, full dry max temp 110 deg c. make: any reputed make with date of manufacturing should not be more than one month at the time of supplying the material.

Pipe water g. i. 1/2” medium quality conforming to is: 1239 (part-i) (weight should be 1.22 kg per met,pipe water g. i. 3/4” medium quality conforming to is: 1239 (part-i) (weight should be 1.58 kg per met,pipe g. i. 1 inch (25 mm) medium quality conforming to is: 1239 (part-i) screwed at both ends, pipe th,g. i. pipe 40mm dia medium weight, screwed at both end socket at one end and other end protected with,pipe g. i. size 2” medium quality confirming to is: 1239 (part-i) 1980, threaded at both end socketed,a set of 1/2” gi fittings consist of nipple 1/2” x4” -75 nos. , socket-50 nos, elbow-50 nos. , union-50,a set of 3/4 gi fittings consist of socket-50 nos, . elbow-50 nos. , nipple 3/4” x4” -75 nos. , union–,a set of 1” gi fittings consist of socket-75 nos, . elbow-75 nos. , nipple 1” x4” -75 nos. , union– 50

Dip tape 20-25 meter length with heavy detachable brass bob of length 15cms- along with calibration certificate,dip tape 10-15 meter length with heavy detachable brass bob of length 15cms- along with calibration certificate,hydrometer 0.700 to 0.750 g ml- along with calibration certificate,hydrometer 0.750 to 0.800 g ml- along with calibration certificate,hydrometer 0.800 to 0.850 g ml- along with calibration certificate,hydrometer 0.850 to 0.900 g ml- along with calibration certificate,alcoholmeter 94-104 per - along with calibration certificate,thermometer ip64c -20degree to 102degree c- along with calibration certificate,hydrometer jar- borosilicate glass accurate 500 ml,manilla rope thick type for samplers bottom all level,manilla rope thin type for samplers bottom all level,1 litre sample containers rectangular shape with aluminium made with sealing facility and washer should be of white colour hdpe virgin ptfe viton material,2 litre sample containers rectangular shape with aluminium made