Hydraulic oil brand: ioc (barrel should be ms only)

Spo2 sensor probe for use with multiparameter monitor of make g3d. the probe should be minimum 3 metres in length.each probe should be individually packed.

Floor end profile,l=2000mm, as per drawing: lw41112, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation.the item should be packed with adequate strength.

Trochanteric femur nail advanced system one set. spec: (1) 9 mm to 12 mm diameter with inbuilt set screw. (2) should be capable of allowing cannulated screw or blade (one) with same hole in proximal part. (3) end of blade and screw should be porous to allow augmentation with 5 mm distal locking option (two). (4) material should be titanium molybdenum. (complete range of size shape and side specific implant with instrumentation should be available at the time of surgery).[ item code no.:s6155

Pin for curve roll of fiat bogie to rcf drg no. lw05124 alt. nil. packing instruction: the item should be collectively packed in wooden box of sufficient strength .

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Va fibula plate (1 plate + 8 va locking screws + 6 cortical screws). spec: locking anatomical five hole variable angle distal fibula plate with 8(2.7 mm) va screw for head and shaft with two 3.5 cortical screw option in head for syndesmotic layer and 4(2.7mm) cortical screw, variable angle locking screw should have option to lock at + - 15 degree of axis in any direction complete range of size shape and side specific implant with instrumentation at the time of surgery. implant should be us fda

Set of glass for ac compartment door for lhb ac 3tier economy (in-house) coaches. as per drawing: mplgdlaccnex1 version 0 packing instruction:pi134 ver 3.0 mirrors: biodegradable self adhesive plastic lamination sheet to be provided on each mirror. followed by wrapping in biodegradable bubble sheet all around. individual mirror to be packed in cardboard box and further ten nos of these mirrors to be packed in bigger cardboard box. the box should be properly tied up with the help of nylon strip

Bearing cover pe for traction motor type 4303by as per bhel drawing no. 24394328002 or s.n. enterprises part no. sne/bcpe/21 note - 1) company name and p. o. no. should be embossed on component, 2) material to be supplied with anti corrosion coating, packed in wooden box and wrapped with bubble wrap.

Disposable presterilised meniscal repair suture passing system with polyethylene button or anchor and 1 to 0 multi strand,meniscal cinch for all inside meniscal repair,all inside meniscal repair implant system.,titanium anchor 2.8 2.4 3.5 5.0 mm components as under,bio anchor 2.8mm 2.4 3.5 5.0mm,suture disc for acl pcl reconstruction titanium all sizes pre sterilised.,titanium endobutton with adjustible length suspensory loop made of suture made of uhwpe core with braided fixation of tendon graft,end resector for arthroscopic shaver system disposable presterilised 3 to 5.5 cm diam,arthroscopic burr all types including acromioplasty burr and conical burrs size 3 to 5.5 mm disposable presterilised,sterile packed cork screw 4.5 mm anchorwith 2 x no. 2 preloaded suture made of uhwpe core cuff repair,sterile packed cork screw 6.5 mm anotator cuff repair,sterile packed bioabsorbable anchor with single loaded sliding suture made of uhwpe core with braided polyester jacket 2.4 2.8 3.5 mm,sterile packed titanium ancho