101 Test Plugs In India 2026

Pneumatically operated endurance machine for making breaking & normal operation test for plug and

Organisation: National Test House | Department of Consumer Affairs

Start Date: October 23, 2026 20:48

Place: Tamil nadu

Due Date: 1 days left

Servicing and load test (c-10 test) along with supply of vent plug and their replacement in various battery banks for unit no. 1 and 2 at ph-i, sgtps, mppgcl, birsinghpur.

Organisation: Madhya Pradesh Power Generating Company Limited | Chief Engineer(Gen.)-Sanjay Gandhi Thermal Power Station-Birsinghpur - MPPGCL

Start Date: November 07, 2026 23:30

Place: Madhya pradesh, sgtps birsinghpur

Due Date: 11 days left

Supply, erection, testing and commissioning of high mast lighting system, solar lighting and providing illumination to transformer bay of ody at mghe power house-jogfalls-577435,karnataka

Supply, erection, testing and commissioning of 14meter octagonal pole type motorized high mast illumination system with 250w led light (06nos.) along with mlcp, supports, foundation, civil works, earthing with complete accessories, luminaries, installation materials, associated equipment etc., with all leads and lifts at front side of mghe power house. supply, erection, testing & commissioning of 10meter high mast lighting with 200w led lights (06 nos.) along with panel board, ladder for climbing, supports, foundation, civil works, earthing with complete accessories, luminaries, installation materials, associated equipment etc., with all leads and lifts at back yard of mghe power house. laying & termination of 4 sq.mm 4 core, 1.1kv grade armored pvc insulated lt ug copper cable from nearest power source to high mast control box and all required accessories for laying the cable to be provided. supply, installation, testing & commissioning of 12 v dc, 120w led solar street lighting system with 5 meter pole, complete accessories, installation materials with all leads & lifts at various areas of mghe power house. providing illumination to transformer bay with 34 lighting points including supply of junction boxes, saddles, pvc pipe, hdpe pipe, industrial plug and socket panel, mcbs and all necessary accessories required for providing lighting points. note- cable required for power supply from acdb source to transformer bay lighting distribution box will be provided by kpcl. supply & installation of 100 w led flood light along with fittings.

Organisation: Karnataka Power Corporation Limited

Start Date: November 03, 2026 20:43

Place: Karnataka, kpcl executive engineer emo office svp mghe

Due Date: 6 days left

Set of male and female terminal block (1) 1- conductor male connector, 2.5 sq mm, pin spacing 5.08mm, 3 pole; 2.5 sqmm part no 231-633 with (2) 1-conductor female plug; 2.5 sq mm, pin spacing 5.08mm, 3-pole, 2.5 sqmm part no 231-301/026-000) brands: wago/ phoenix note: 1) the firm should submit authorized dealership certificate or proof of purchase from oem or dealer and necessary test certificates. 2) firm should mention make and model no. while participating in the tender.

For complete description and other details, please refer to tender document.

Organisation: Ministry of Railways

Start Date: October 09, 2026 18:05

Due Date: 4 days left

Drift punch copper 15 cm,engineers stethoscope,prink punch 15 cm,radiator pressure cap,compression testing gauge suitable for diesel engine with standard accessories,magneto spanner set with 8 spanners,rivet set snap and dolly combind 3 mm,rivet set

Drift punch copper 15 cm,engineers stethoscope,prink punch 15 cm,radiator pressure cap,compression testing gauge suitable for diesel engine with standard accessories,magneto spanner set with 8 spanners,rivet set snap and dolly combind 3 mm,rivet set snap and dolly combind 4 mm,rivet set snap and dolly combind 6 mm,stud remover with socket handle,spark plug spanner 14mm x 18mm x size,marking out table 90 x 60 x 90 cm,allen key set of 12 pieces 2 to 14 mm,callipers outside with spring 15 cm,dividers with spring 15 cm,philips screw driver set of 5 pieces 100 mm to 300 mm,chain pulley block capacity with tripod stand 3 ton,dividers with spring 15 cm,drill twist, various sizes 1.5 mm to 15 mm by 0.5mm,fuel injection pump dismantling tool kit universal vice,lifting jack screw 3 ton,lifting jack screw 5 ton,lifting jack screw 20 ton,right cut snips 250mm,set of stock and dies metric,torque wrenches 12 to 68 nm,torque wrenches 50 to 225 nm,bench lever shears 250 mm blade x 3mm,liquid penetrate inspection kit,starter

Organisation: Directorate of Employment & Training | Labour and Employment Department Gujarat

Start Date: October 19, 2026 19:01

Place: Gujarat

Due Date: 0 days left

Blow lamp brass,steel rule graduated both in metric and english unit,bearing puller outside,hammer extractor,outside calliper,inside calliper,divider,drill hand brace,drill s.s. twist block,plane cutters,smoothing cutters,hand vice,hand drill machine

Blow lamp brass,steel rule graduated both in metric and english unit,bearing puller outside,hammer extractor,outside calliper,inside calliper,divider,drill hand brace,drill s.s. twist block,plane cutters,smoothing cutters,hand vice,hand drill machine,brake test arrangement with two spring balance rating-,fire buckets-,caliper inside spring type,caliper outside spring type,chisel cold flat,blow lamp,chisel cold cross cut 9 mm x 150 mm,chisel diamond point,lapping plate,drill gauges letter drill gauge,number drill gauge,jigs and fixture sample for demonstration,gauge plug single ended,engineer s try square knife edge,welding torches,calipers outside with spring,dividers with spring,cylinder bore gauge,different type of engine bearing model,different type of piston model,drift punch copper,drill point angle gauge,files assorted sizes and types including safe edge file,fuel injection pump dismantling tool kit,granite surface plate with stand and cover,growler,hand shear universal,hollow punch set of seven pieces,

Organisation: Directorate of Employment & Training | Labour and Employment Department Gujarat

Start Date: October 23, 2026 15:57

Place: Gujarat

Due Date: 0 days left

Contract Awarded

Test plug

Organisation: Department of Atomic Energy | PMO

Start Date: June 11, 2025 19:26

Due Date: Expired 498 days ago

Contract Awarded

🔬 Invitation for Bids: Test Plug/Probe 🔧 The Department of Atomic Energy, under the Prime Minister's Office, is seeking bids for the supply of a Test Plug/Probe. 📅 Submission Deadline: May 22, 2024, 11:00 AM Interested bidders should provide detailed specifications, pricing, and delivery schedules. This procurement is aimed at supporting critical research and development activities within the Department. Keywords: Test Plug/Probe, Department of Atomic Energy, PMO, Bid Invitation, R&D Supplies

Organisation: Department of Atomic Energy | PMO

Start Date: April 30, 2024 23:04

Due Date: Expired 904 days ago

Test plug/jack as per attached specifications

Organisation: Department of Atomic Energy | PMO

Start Date: August 04, 2023 17:39

Due Date: Expired 1175 days ago

Test plug/jack as per attached specifications

Organisation: Department of Atomic Energy | PMO

Start Date: November 06, 2023 20:29

Due Date: Expired 1081 days ago

Results for: Test Plugs

Pneumatically operated endurance machine for making breaking & normal operation test for plug and

Pneumatically operated endurance machine for making breaking & normal operation test for plug and

Servicing and load test (c-10 test) along with supply of vent plug and their replacement in various battery banks for unit no. 1 and 2 at ph-i, sgtps, mppgcl, birsinghpur.

Servicing and load test (c-10 test) along with supply of vent plug and their replacement in various battery banks for unit no. 1 and 2 at ph-i, sgtps, mppgcl, birsinghpur.

Supply, erection, testing and commissioning of high mast lighting system, solar lighting and providing illumination to transformer bay of ody at mghe power house-jogfalls-577435,karnataka

For complete description and other details, please refer to tender document.

Drift punch copper 15 cm,engineers stethoscope,prink punch 15 cm,radiator pressure cap,compression testing gauge suitable for diesel engine with standard accessories,magneto spanner set with 8 spanners,rivet set snap and dolly combind 3 mm,rivet set

Blow lamp brass,steel rule graduated both in metric and english unit,bearing puller outside,hammer extractor,outside calliper,inside calliper,divider,drill hand brace,drill s.s. twist block,plane cutters,smoothing cutters,hand vice,hand drill machine

Test plug

Test plug/probe

Test plug/jack as per attached specifications

Test plug/jack as per attached specifications

Get new Test Plugs tenders

Need help bidding on these tenders?