Supply of electromagnetic flow meter with flange end connection

02 different type sizes of swing type check valve with both end flange.

S1 ms shuttering plate 1 point 20 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s2 ms shuttering plate 1 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s3 ms shuttering plate 1 mtr x 0 point 60 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s4 ms shuttering plate 1 mtr x 0 point 50 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s5 ms shuttering plate 1 mtr x 0 point 30 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s6 shuttering nut and bolt of size m12 x 50mm comma m12 x 60mm of good quality and branded,s7 round ms pipe 50mm dia x 6 mtr long x 3 point 5 mm thickness of good quality and branded,s8 round ms pipe 50mm dia

15 mm galv. steel tubes medium grade is: 1239 part-i/2004 both ends screwed one end with socket and other end with plastic thread protector , randum length of 4 to 7 m continuously welded electric resistant weld(erw), high frequency induction welded(hfiw), hot finished welded (hfw) light coated isi mark and socket also to be isi marked confirming to is: 1239 (part-ii)/2011.

Ms shuttering plate of size 1 mtr x 1 pt 2 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50x 6 mm having properly welded uniform finish approx weight not less than 69 pt 97 kgs,ms shuttering plate size 1mtr x 1 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50 x50 x6mm having properly welded uniform finish appx weight not less than 51 pt 70 kgs,ms shuttering plate size 1 mtr x zero pt 60 mtr made with 3 pt 15 mm thick ms sheet with angle iron size 50x50x 6mm having properly welded uniform finish appx weight not less than 31 pt 92 kgs,ms shuttering plate size 1 mtr x zero pt 5 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50 x 6mm having properly welded uniform finish,ms shuttering plate size 1 mtr x zero pt 3 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50x 6mm welded uniform finish appx weight not less than 20 pt 46 kgs,ms shuttering plate size 1 mtr x zero pt 2 mtr made with 3 pt 15 mm thick ms sheet with angle iron size 50x50x

221500142 g. i. pipe dia-4 inch both ends with matching threaded of flange, length- 6 meter, (od-,220300616 h. d. type class-c/b. s. table-10e g. i. threaded 4 flange, od 215.9 mm, pcd 177.8 mm, 8

Ms channel of size 150x75x6 [430 mm long] along with ms plate of size 150x75x16mm i.e. ms plate [ref: 2] to be welded to the channel [ref: 1] at one end as per s. c. rly.drg. no.c/els/lgd/ex.ftg/3/12, alt 1 ref.no.1 & 2. note:- after welding the channels should be coated with black enamel paint as per is:8662/2004

Heavy duty high tenacity 100 percent polyester flat duplex webbing sling, having rein forced eye loop at both end. capacity- 3 ton, length- 3 mtr. and width- 75 mm. (to be supplied with load test certificate from government approved test house)

13 pin uic coupler, plug assembly consisting of 1.62 meter cable with polyamide hose & uic plug on both ends round type similar to schaltbau make as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev.-2.

Nctps i se m ii circle ahp dn complete cleaning of outer surface of cast basalt lined ms pipe having od 406 mm and painting coal tar paint in ash slurry disposal line 2 and 3 from recovery water pump house to ash dyke discharge end