Rubber air hose pneumatic purpose

Pneumatic/air hose rubber nominal

Medium pressure rubber hose for sander confirming to sae 100 r2 specifications. length = 950 mm, od =19 mm, id = 9.5 mm, both side 3/8 size swivell nut

Rock breaker pipe clamp,hose,hose,cover,bolt m16x 50mm,bolt m16x 55 mm,washer m16,hose 12 sae ephp 1500mmb,hose 12 sae ephp 1500mmb,flange,cap screw 12m x 45mm g12 point 9,o ring,flange split,cap screw 10m x 35mm,o ring,clamp single pipe,washer m10,capscrew m 14 x 50mm,cap screw,rubber insert dia 56,rubber insert dia 54

Single wire braided coton covered hydraulic hose , id-3/16 (4.76 mm) , od-33/64 (13.09 mm) to spec sae 100 r5.

3/4inch x 550mm length rubber hose to rdso drg.no. k1054 suitable for air spring suspension system lhb bogies. material specn. sae 100 r3.

Pneumatic tool hose rubber (having id-12.5 mm and od-21.5 mm maxm.) two layer rayon braided conforming to specifcation is-446 type-iii minimum bursting pressure 56 kg/cm2, acceptable make: plasser, dunlop, indomaksson, pix, polyhose only.

Rubber air hose - nominal bore 12.5mm, braided with synthetic fibre reinforcement in lengths of 15mtrs, working pressure of 1.0 mpa to is: 446- 2025, type 1.

Braided rubber hose pipe id 100x od 110 x l 500 mm with 01 no. worm drive clip, size : 120 mm, as per spec : - is : 444-1987, type- 2, and spec : aisi-304

Pneumatic grease gun of 50 kgs complete with pipe for bcm machine, specifications : weight (approx): 41 kg capacity: 50 kg ratio: 50:1 output volume: 360 gms/min. output pressure: 8500 psi type: pneumatic hose type: rubber hydraulic crimped hose length: 2 mtrs., acceptable make : plasser, penta only.