Floor end profile,l=2000mm, as per drawing: lw41112, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation.the item should be packed with adequate strength.

Plate spring dia 160 x dia 82 x 6 mm as per drg. no. 1268801 ver. 05r1, item no. 25. packing instruction - pi001 (suitably packed in jute bags)

Single inlet centrifugal blower 415v, 3-ph,50 hz.generally conforming to drawing no. edts-331, rev-a, annexure-a, type-ii or latest. packing instruction - spi215

Luggage rack complete for memu/tc 3-phase coaches, as per drawing: icf/mrvc/c/bt-6-2-002 alt c col- i, packing instruction no.pi042 ver1.0

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Trough floor assembly complete for 3 phase memu/dmc coach note:- 1.0 extra channels are to be provided on suitable location of trough floor assembly for lifting/transporation purpose ., as per drawing: em11545 alt b item no. 6 to be supplied as loose in seprate packing, packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any sh

Battery box assembly schedule of infrastructural requirements for stainless steel battery box complete as per specfication no: mdst 141 rev.01 , as per drawing: cc91205 alt a , packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any shall be at the cost of supplier.

Bogie frame of lhb coaches drawing:-1. lw03007 - sheet 1 of 2 and 2 of 2 alt. g or 2.455-0-3-001 _ j _ icf _ sheet 1 of 2 & 2 of 2 alt ( k ) specification no:- mdts 213 rev.04, mdts-166 rev 02 special terms and conditions:- packing instruction: bogie frame of fiat bogie 1-all machined surface shall be applied with suitable rust preventive which shall prevent it from corrosion & oxidation for a minimum period of one year of storage 2-the packing shall be such that all the machined s

Florescent paper,legal paper,fabric colour,drawing sheet,wire 1.5mm polycab,wire 1mm polycab,bulb 20w with holder,switch with socket 6a,switch bd 12 switch,laser pointer green,slide paper,spiral sheet,pen stand,lamination roll,tape 1 inch transparant,stadler lumo permt,paper cutter blade,sketch pen luxer,stadler fine line,talk sheet,drawing roll,tape 1 inch all colour,packing tape 2 inch,stadler soluble marker,rebinding of alternator big,printed white file with logo,printed file cover yellow,ivory sheet,acrylic sheet,envelop legal with cloth,paint white,printing of investigation slip,bond paper,printing of key issue register 400 pages,binder clip 25mm

For complete deion and other details, please refer to tender