Lowering and diversion of 3 no. (2 no.of 10 inch dia and 1 no.of 8 inch dia ) pipeline of 2 no. 4000 gpm and 1 no. 2000 gpm pump-motor set of amal.joyrampur colliery under lodna area..

Shifting, diversion, extension, dismantling, repairing and maintenance of 02(two) ranges of 10 inch and 8 inch dia. m.s. pipeline at quarry no.2 of kathara colliery.

Installation of 150mm dia 1160m long ms pipeline from 17l/2d to 2l/16d for 17l/2d pump with 6 inch dia ms pipe and in underground at mic, jpc

Providing new borewell(150mm dia) ,5hp motor and extension of pipeline arrangements(200m) for nursery and miniforests in ceylon colony village in panchalankurichi panchayat

Condenser fan frp, suitable for use in sidwal make conventional rmpu, axial flow, number of blades:8/10, blade series material: h, nylon 66 rgf25 fr, hub dia: 150 mm, hub material: lm-6, motor mounting: adaptor type, frp fan dia: 21 inch, conforming to rdso specification no. elps/spec/ac/03 (rev-2) may-2009 with amendment no. 1 & 2.

Supply of above ground header pipelines for tank lorry fiiling gantry for ms 8inch dia with third party inspection applicable and as per the standard in item deion,supply of above ground header pipelines for tlf gantry hsd for 12 inch dia with third party inspection applicable and as per the standard in item deion,supply of above ground header pipelines for tlf gantry for eth and hexane 4 inch with third party inspection applicable and as per the standard in item deion,supply of unloading pipelines s at tlf gantry for ms hsd ethanol bio diesel hexane of 6 inch dia with third party inspection applicable and as per the standard in item deion,supply of unloading pipelines at tlf gantry for ms hsd ethanol bio diesel hexane of 4inch dia with third party inspection applicable and as per the standard in item deion,supply of pipelines for intertank transfer of ethanol tanks of 3 inch dia with third party inspection applicable and as per the standard in item deion,supply of pipeline

Air compressor for plasma cutting machine,angle plate adjustable 250 x 150 x 175,anvil 24 sq. inches working area with stand,bearing different types,boring bar indexable,caliper hermachrodite.spring 15 cm,caliper inside spring 6 inch or 15 cm,caliper outside spring 6 inch or 15 cm,caps screws m6, m8, m10, m12,carbide wear block 1 mm-2 mm.,carrier for mounting components,,drill twist 1.5 mm to 15 mm,drills guage straight shank,drills guage straight shank,cut section models for hydraulic components,cut section models for penumatic components,divider spring 6 inch or 15 cm,dowel pin straight dia. 1 inch length 4 inch,drift drill 200 mm hardened and black finish,stake grooving. 100 x 100 x 300 mm,stake hatchet with leg. 300 x 200 x 20 mm,file knife edge smooth.15o mm,file round 2nd cut 150 mm,file round 2nd cut 200 mm,file square 2nd cut 250 mm,file square rough 300 mm,file triangular 2nd cut 200 mm,marking out table 90 x 60 x 90 cm,drill gauge 1,5 to 12.5 mm in steps of 0,5 mm,drill twist st. shank metric,drill

Aa battery cell-1.5 v,aaa battery cell-1.5 v,al. pipe 50 mm dia. x 3 mm thick,al. ferrul-16 sq.mm,aluminium flat- 50 x 3 mm,bar magnet,bare copper wire 19 swg,bare copper wire 8 swg,battery 9v,boring tool lathe,brake light bulb,brake light socket,c.i. block- 50 x 6 x 100mm,cable joint kit resin compound,capacitor- 47 microfarad, 25v,car cabin light bulb,carbon resistor box- 0.25 watt and 0.5 watt,carbon resistor-12k, 0.25 watt,carbon resistor-1k, 0.25 watt,carbon resistor-3k9, 0.25 watt,carbon resistor-470e, 0.25 watt,carbon resistor-82 ohm, 0.25 watt,copper lug -pin type- 4.0 sq.mm,copper lug ring type- 1.5 sq.mm,copper lug ring type- 2.5 sq.mm,copper lug -ring type- 4.0 sq.mm,copper pipe- 50 mm dia. x 3 mm thick,copper pipe- 0.25 inch dia.,dc motor -small size 1.5 volt,diode - in4001,diode - in4007,diode, sot- 23 -2.9 x 1.3 mm,earth electrode- primary electrode-2100 x 26 x 3.5 mm,earth electrode- secondary electrode -copper strip-20 x 5 mm,electronics sequential control circuit 4 channel,engine head gasket

Di including extension and shifting of 3 nos. 4000 gpm pump-motor and 01 nos 1000 gpm pump-motor with electrical from middle quarry to 10 inch dia and 6 inch dia pipe line of b patch re-installation at new place 3 nos 4000 gpm pump an

Shifting including di and extension of 10 inch dia pipeline in order to lowering (multiple times) 02 nos. 2000 gpm and 01 no. 3000 gpm pump- motor to maintain smooth supply of water for domestic use at jeenagora quarry amal.nt-st-jg colliery u