Battery box assembly schedule of infrastructural requirements for stainless steel battery box complete as per specfication no: mdst 141 rev.01 , as per drawing: cc91205 alt a , packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any shall be at the cost of supplier.

Monthly basis cab and taxi hiring service - without fuel - muv ac diesel driven commercial vehicle muv mpv suv e g bolero neo scorpio sumo or equivalent the registration date of the vehicle shall be such that at any point of execution of contract..

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Diffuser for fluorescent light fitting to item no.7 of icf drg. no. sk-7-6-103 col. iii with alterations c to m. note: material for item no.7 should be lexan-940 polycarbonate grains of ge plastic only and shall be free from scratches, air bubbles and holes etc. insignia of the firm may be embossed on the diffuser. however, the firms may quote for latest specification/drawing with amendment if any issued by rdso/icf/rcf.

Sealed maintenance free valve regulated lead acid rechargeable battery of normal voltage 12 v, nominal capacity of 7 ah suitable for use of emergency light unit of lhb type ac coaches (test certificate to be enclosed along with batteries). the battery shall not be more than 2 months old from the date of manufacture, at the time of supply. acceptable makes as per bill of material rdso/pe/spec/ac/0180-2016 (rev-0)/latest: m/s. exide, m/s. tafe (amco), m/s. amar raja, m/s. hbl note: item to be p

Digital clamp on earth tester with automatic self-calibration, jaw capacity 32 mm, 4 digit lcd display with 47 x 28.5 mm in lenth. automatic range selection and 0.1 ohm to 100 ohm resistance measurement range. the equipment shall be possible to measure the earth resistance value without any connection lead .make - kusum, meco,htc ,fluke etc

Residual current circuit breaker with overload (rcbo) 16a, 4 pole with type d tripping curves. 415v,50hz, sensibility 30ma ac. breaking capacity 6-10 ka, suitable to fit with din rail clamps. impulse current withstands at 8/20 microseconds pulses = 3ka, make: legrand (or) schneider (or) abb (or) lk (or) siemens only. similar to cat no. auf3d401603, part no : a9n4p16d, a9v61440. the material shall be procured from the said oem or their authorized dealers with tender specific authorization onl

Red dye penetrant kit consisting of red dye penetrant, remover/cleaner & developer in the ratio 1:4:4 as per is specification no. is:12889-2018, group-1 . the penetrant remover & developer should be of the following type:- penetrant (1) visibility: type-ii visible dye 20 microns. (2) washibility: method c , solvent removable. remover/cleaner-- class-2, non-halogenated solvent . packing:- in acrosol container cans. the content of the material ( mixture of product & propellant) shall be 80+/ 3

Wheel disc for neral-matheran ng coacheswheel disc for neral-matheran ng coaches, size- tread dia-476 mm, bore dia-53 mm, root radius of the flange should be 15.5 mm. thickness of the wheel flange should be 24 mm. height of the flange should be 22 mm. conforming to kwv/sketch-1006 and mlr drg. no. la-67. for any contradiction between the sketch and the drawing, sketch no. kurdu/sketch-1006 shall prevail to the extent of contradiction only in light of size in description. material specification

Manufacturing and supply of inspection gauges as per rdso drawing no. t-10311 for in sleeper measurement of turnout switches along with testing and calibration by any government approved lab or by any nabl accredited labs. the gauges are to be manufactured as per specifications mentioned in rdso drg. no. t-10311 and annexures attached. one set consists of following gauges- i) chipped tongue rail gauge ii) new wheel contact gauge iii) switch splitting proneness gauge iv) lateral wear angle gaug