Welded steel conduit pipe 25mm black in colour, both size inner & outer screwed at both ends length 3mtrs with 14swg gauge, conf. to is: 9537, pt. ii, 1981

Rigid steel conduit pipe 40 mm dia., 4.5 metres length conforming to is: 9537 pt ii-1981 with amendment no. 1, 2 & 3 or latest if any.

Et 6367 polyester webbing slings with reinforced eye loop at both ends,polyester webbing slings with reinforced eye loop at both ends,polyester webbing slings,polyester webbing slings with reinforced eye loop at both ends,polyester webbing slings,polyester webbing slings with reinforced eye loop at both ends,polyester webbing slings with reinforced eye loop at both ends as per en,duplex type polyester flat belt webbing slings,polyester endless round sling,polyester endless round sling,ungalvanised steel wire rope,steel wire rope m s flexible,chain pulley block light weight,chain pulley block light weight,chain pulley block light weight,chain pulley block light weight,chain pulley block,triple spur gear chain pulley block heavy duty with geared travelling trolley,motorised chain pulley block,d shackle fitted with screwed pin,d shackle fitted with screwed pin,d shackle fitted with screwed pin,d type shackle with screwed pin eye and coller,d shackles,hydraulic jack,hydraulic jack,hand operated hydraulic test pum

500a, 750v, jumper plug assembly to spec. rdso/pe/spec/ac/0177 (rev-0)-2013 or latest, assembled jumper plugs at both ends, duly crimped with cables and covered with flexible polyamide conduit nw70 length 1650 mm to rdso/pe/spec/ac/0138-2009 (rev-1) or latest and its fittings/accessories. as per icf drawing icf/sk3-7-1-095 alt b or latest.

13 pin uic coupler plug assembly with contact pin consists of i .3 meters cables and plyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 reva. note ulc plug as per clw drawing no. clw/es/3/sk- 4/0047/e similar to schatbau part no. ulc st 13 p eo d2 and conduit as eer rdso specification rdso/pe/spec/ac-0138-2009 reva or latest.

13 pin uic coupler plug assembly consists of 1.3 mtrs cable and polyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev. 2. note- uic plug as per clw drawing no. clw/es/3/sk-4/0047/e similar to schaltbau part no. uic st13peod2 and polyamide conduit as per rdso specification rdso/pe/spec/ ac- 0138-2009 rev-2 or latest. item to be procured from clw approved sources.

Pipe water g. i. 1/2” medium quality conforming to is: 1239 (part-i) (weight should be 1.22 kg per met,pipe water g. i. 3/4” medium quality conforming to is: 1239 (part-i) (weight should be 1.58 kg per met,pipe g. i. 1 inch (25 mm) medium quality conforming to is: 1239 (part-i) screwed at both ends, pipe th,g. i. pipe 40mm dia medium weight, screwed at both end socket at one end and other end protected with,pipe g. i. size 2” medium quality confirming to is: 1239 (part-i) 1980, threaded at both end socketed,a set of 1/2” gi fittings consist of nipple 1/2” x4” -75 nos. , socket-50 nos, elbow-50 nos. , union-50,a set of 3/4 gi fittings consist of socket-50 nos, . elbow-50 nos. , nipple 3/4” x4” -75 nos. , union–,a set of 1” gi fittings consist of socket-75 nos, . elbow-75 nos. , nipple 1” x4” -75 nos. , union– 50

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4),(vitreous china) - washdown water closets as per is 2556,cp brass waste coupling 40 mm,gi nipple 20 mm x 100 mm,fevicol 1 kg in pack,cast brass float valve 15 mm with ball and rod complete,cast brass valves plunger type 20 mm,ewc single piece vitreous china ware complete,mild steel sliding door bolt cllpt type 300 mm long, rod not less than 16mm dia, isi marked,paint synthetic enamel smoke gray first quality in 04 ltr container,gi tee 25 mm,stainless steel butt hinges size 75 mm,ptmt waste coupling 32 mm,gi socket 15 mm,cp brass extention nipple for 15mm bore 65mm long,cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm,ss plate rack 24 inch x24 inch x10 inch,synthetic enamel paint of black colour.,polish fre

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4),(vitreous china) - washdown water closets as per is 2556,cp brass waste coupling 40 mm,gi nipple 20 mm x 100 mm,fevicol 1 kg in pack,cast brass float valve 15 mm with ball and rod complete,cast brass valves plunger type 20 mm,ewc single piece vitreous china ware complete,mild steel sliding door bolt cllpt type 300 mm long, rod not less than 16mm dia, isi marked,paint synthetic enamel smoke gray first quality in 04 ltr container,gi tee 25 mm,stainless steel butt hinges size 75 mm,ptmt waste coupling 32 mm,gi socket 15 mm,cp brass extention nipple for 15mm bore 65mm long,cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm,ss plate rack 24 inch x24 inch x10 inch,synthetic enamel paint of black colour.,polish fre

For complete deion and other details, please refer to tender