Supply of go and no-go thread plug gauge

Air spring height go and no go gauge as per drg. no. cws/bct/2020/05 dt 25/11/2020. calibration certificate should be provided for each gauge from nabl approved lab.

29.65 /-0.13, internal depth h&l plunger gauge as per ofaj drg no sm/g 2060,52-0.05/ 0.15 total length h&l gap gauge as per ofaj drg no sm/g 2058,m 35 x1.5 p-6g(lh) & depth 8 min, internal threat minor dia go&nogo plug gauge as per ofaj drg no. sm/,m 35 x1.5 p-6g(lh) & depth 8 min, internal threat effective dia go-screw plug gauge as per ofaj drg n,m 35 x1.5 p-6g(lh) & depth 8 min, internal threat effective dia nogo screw plug gauge as per ofaj drg,9.9 /-0.25 internal depth h&l plunger gauge as per ofaj drg no sm/g- 2061,dia 40.9 /- 0.25 ext. dia go ring gauge as per ofaj drg no. sm/g-2063.,dia 40.9 /-0.25 ext. dia nogo ring gauge as per ofaj drg no sm/g-2064,dia 10 /- 0.2 internal dia go&nogo plug gauge as per ofaj drg no sm/g 2913

Tooth spacing k value checking go & no g [tooth spacing k value checking go & no go gauge for bull gear- 107 teeth (mating shaft pinion -21 teeth ) for wag-9 locomotive. size go: 317.09/317.17 mm & no go (service limit): 316.49 mm. ref : rdso drawing no. sk.dp-3848. material: tool steel- is-3748/90, hardness: 40/45 hrc and supply with calibration certificate issued from nabl approved lab.]

Gauge for tail fin thickness 2.25 /-0.055mm as per drg no. g tai 120 2 808 for tail 120mm mk-ii,go thread plug gauge (forø 22 1/8 lh thread) tail 120mm mk-ii as per drg no: g tai 120 2 816 0.,angle 8 degree go&nogo gauge as per drg no. g tai 120 2 806 for tail 120mm mk-ii,angle 10 degree go&nogo gauge as per drg no. g tai 120 2 807 for tail 120mm mk-ii

Thread plug gauge _76705001100_rfq_1_1000075842_ea,thread ring gauge _76705001200_rfq_2_1000075842_set,portable wheel diameter gauge _76705001300_rfq_3_1000075842_ea,digital wheel distance measuring gauge _76705001400_rfq_4_1000075842_ea,tread wear measuring gauge _76705001500_rfq_5_1000075842_ea,flange wear gauge _76705001600_rfq_6_1000075842_ea,tyre defect gauge _76705001700_rfq_7_1000075842_ea,wheel profile gauges _76705001800_rfq_8_1000075842_set,gauge fig 9 ref g 95 manual _77505201400_rfq_9_1000075842_ea,gauge fig 14 ref g 95 manual _77505201450_rfq_10_1000075842_ea,gauge fig 15 ref g 95 manual _77505201460_rfq_11_1000075842_ea,gauge fig 16 ref g 95 manual _77505201470_rfq_12_1000075842_ea,gauge fig 17 ref g 95 manual _77505201480_rfq_13_1000075842_ea,gauge fig 30 ref g 95 manual _77505201500_rfq_14_1000075842_ea,gauge fig 33 ref g 95 manual _77505201520_rfq_15_1000075842_ea,gauge fig 34 ref g 95 manual _77505201530_rfq_16_1000075842_ea,gauge fig 40 ref g 95 manual _77505201540_rfq_17_1000075842_ea,gaug

Go plug gauge for m44x1.5lh thread (rear cap) as per drg no g rea 120 2 701 0, nogo plug gauge for m44x1.5lh thread(rear cap) as per drg no g rea 120 2 702 0,dia25 0.10go&nogoplain plug gauge (rear cap 120mm mk-ii) drg. no: g rea 120 2 703 0,snap gaugego&nogodia51.98-0.10(rear cap 120mm mk- ii) drg. no: g rea 120 2 705 0,snap gauge 23.11 /-0.09 for penetrator 125mm fsapds dop 530mm as per drg no: g pen 125 7 107 0.

Dip tape 20-25 meter length with heavy detachable brass bob of length 15cms- along with calibration certificate,dip tape 10-15 meter length with heavy detachable brass bob of length 15cms- along with calibration certificate,hydrometer 0.700 to 0.750 g ml- along with calibration certificate,hydrometer 0.750 to 0.800 g ml- along with calibration certificate,hydrometer 0.800 to 0.850 g ml- along with calibration certificate,hydrometer 0.850 to 0.900 g ml- along with calibration certificate,alcoholmeter 94-104 per - along with calibration certificate,thermometer ip64c -20degree to 102degree c- along with calibration certificate,hydrometer jar- borosilicate glass accurate 500 ml,manilla rope thick type for samplers bottom all level,manilla rope thin type for samplers bottom all level,1 litre sample containers rectangular shape with aluminium made with sealing facility and washer should be of white colour hdpe virgin ptfe viton material,2 litre sample containers rectangular shape with aluminium made

Tooth spacing k-value checking go gauge [tooth spacing k-value checking go gauge for bull gear 72 teeth mating shaft pinion 20 teeth for wap-7 locos to rdso drg. no. skdp-3474 & rdso: mp.m1-129/86. sizes go: 260.958mm/260.992 mm. material: tool steel to is: 3748/90, hardness: 50/55 hrc. c alibration certificate from nabl approved lab to be supplied along with the material.]

Wheel profile gauge for b.g.loco rdso drg.no.skdl 3592 alt-6 ( for measurement of flange wear, root wear, tread wear, tyre thickness, wheel diameter and flat spot measuring gauge) material to be supplied along with calibration certificate traceable to nabl standards.