Floor end profile,l=2000mm, as per drawing: lw41112, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation.the item should be packed with adequate strength.

Carbide sludge containing minimum 50 cao (on dry basis) . it should be free from grits, stone, lumps

Needle for inside-out meniscal repair with eye for thread.1. standard-length stainless steel with a 38cm or more in length and diameter should be 0.8 mm or less. 2. should be made up of high strength, flexible stainless steel, 3. needle should have eye on non-sharp end to pass minimum 2-0 suture. 4. needles can be used with other meniscal repair systems. (as per detailed specifications attached)

Chlorine tablets for use in ir-drdo bio-toilets confirming to rcf specification mdts-14274 rev-00. technical requirements: 1. the tablet size should be 78 mm diameter and weight should be of approximately 200 g. 2. the tablet should have active molecule of 3, 5 di-chloro-isocyanuric-acid. 3. it should have effective chlorine of >= 50 percent chlorine. 4. the tablet should have formulated for sustained release (should last for at least 21 days in tap water). 5. moisture content should be

Pacer with mask for child [srphc82337065-spacer with mask for children.1)it should be suitable for use for infants and children.2)the minimum capacity of the holding chamber should be approximately 250cc(ml).3)the holding chamber should have a valve to prevent rebreathing of the exhaled air.4)should be made of polymer /polycarbonated material.5)should have a mask of pediatric size suitable for covering the nose and mouth of the infant and children.6)should be compatible with the mdi which is b

Nyloc nut m20 high tensile, as per drawing: is:7002-1991/din982, 10, coating as per mdts-057, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. as per drawing no: lw05004 alt d , item no-57

Printing and supply of electric locomotive schedule card ia/ib (enclosed for reference). schedule card record consisting of 34 pages (17 leaves) (english only) note:- (1) paper quality should be minimum 75 gsm. (white) (2) printing should be done on both sides of the paper. (3) after printing, schedule card should be supplied in booklet form either tag (or) pinned. (4) the firm should contact the consignee to collect the updated/finalised schedule form before printing.

Hq_med_sur_[ph.no.272005] cotton bandage cloth non sterilized. the cloth should be woven in plain weave with well formed selvedge and free from filling, stitching or dressing material defects. it should be bleached to good white as per is.863:1988. width of 100 cm, supply in metres.

Set of standardized registers consists of (a3 with printing & binding of 757 registers (14 different types of registers), a4 with printing & binding of 2314 registers (59 different types of registers) & a5 with printing & binding of 1049 registers (14 different types of registers) as per the details enclosed in annexure: i, ii & iii). . printing as per sample enclosed. quality of paper should be 70 gsm & front cover page should be 80 gsm & properly binded. one printing proof should be got appr

Intubating catheter/bougie 14 french 70 cm long - (1) it should facilitate endotracheal intubation in patients when visualisation of the glottis is inadequate. (2). introducer should be a 14 french 70 cm long radio opaque catheter for adults (3). the tip should be blunt and angled to assist in proper placement beyond the vocal cords and to minimise trauma to internal structures. (4). should have 2 removable adapters to permit ventilation. one with a 15mm adapter to connect to ventilating circu