Split pin size 10 x 63 -st is:549-2005

Washer spring m8 single coil type a phospated to specn is: 3063-94,washer spring, single coil type a nominal size m-10, to spec is: 3063 steel phosphated,pin cotter split steel phosphated to size 2mm dia x 25mm long to spec n is: 549-2005,pin cotter split dia 4 x 45 (is: 549) , designation: split pin iso 1234-4x45-st to is: 549,pin cotter split 5mmx45mm long steel to specn is: 549-2005.

Split pin size dia 13 x 112 mm long to is:549/2005 rev.-3.

Split pin of dia 5.0 x 80mm with zinc coated as per is:549/2005.

Washer 5t 65g 05 to gost 6402-70,cotter pin/split pin 2x12.019 gost: 397-79,split pin 3.2 x 20 to is: 549, zinc plating 9 microns thick

Suspension head bolt & pin as per drg. hwpm/mu/19(rev-2),mild steel split pin (5mm x 65mm) as per-is-549

Set of split pins for pantograph type am-12 (low speed). set consisting of 08 items 1. split pin for servo motor size: 4x56 to contransys part no.c00180001 or equivalent, qty-01 no. 2. split pin for throttle valve assembly size: 1.5x50 to contransys part no.c00190001 or equivalent,, qty-02 no. 3. split pin for main spring assembly size: 2.5x30 to c0060003 or equivalent,, qty-06 nos. 4. split pin for push rod assembly size: 1.5x30 tocontransys part no.c0090004 or equivalent, qty-01 no. 5. split

Set of split pin suitable for am-12 type pantograph. one set consisting of 07 items in 55 nos. size:- (1) 4mm x40mm, qty = 22 nos. (2) 3mm x 25mm, qty = 02 nos. (3) 5.5mm x 50mm, qty = 01 no.

Set of split pin for ir03h pantograph. each set consisting of 09 items (21 nos) as per enclosed annexure b. set of spilt pins for pantograph type ir ? 03h sl. description part no qty/set 1. split pin for push rod assembly (dia 3mm x 30l) c0090004 02nos 2 . split pin for steady link assembly(dia1.5mm x 30l) c0090005 01nos 3. split pin for support rod cylinder assembly bottom side(dia 4mm x 56l) c00150012 02 nos. 4 . split pin for support rod cylinder assembly top side ( dia 3mm x 30l) c00150014

Hex head bolt m24x140x90 to is: 1364,s4.8 with castle nut to is:2232, spring washer to is 3063, flat washer to is:2016 with split pin to is: 549 for buffer (split hole of dia.5 mm at a distance of 10 mm & 15 mm from bottom end split holes