Cone roller and cage assembly (inner rings with polyamide cage assemblies) for upgraded class e [6 inch x 11 inch] ctrb for freight stock, 22.9/25 t axle load make m/s. timken india ltd. other technical requirement confirming to rdso str no. ab/rb-40-2016 (rev.2

Narrow jaw adapter class e 6 x11 . as per drg.no. drawing - rdso drawing no : wd-89067-s/9, alt-12, specn: mat. spec. - as per drawing with latest revision and amendments and conforming to rdso str no. ab/rb-40-2016, rev-2 of june 2021, with latest revision and amendments.

Cone roller and cage assembly (inner rings with polyamide cage assemblies) for upgraded class - e [6 inch x 11 inch) ctrb for freight stock, 22.9/25 t axle load.make m/s. nei ltd. to drg. no. rbsd-7111, rev nil, item-1. other technical requirements confirming to rdso str no.ab/rb-40-2016 (rev.2).

Axle end cap screw, drg. no. wd-18016-s-01 alt.-2 (item no.1) or latest, str: ab-rb-40-2016 (rev.-2).

One set consisting of three items of the same make : (1) aar-approved cartridge tapered roller bearing class e (6 x11 ) complete for use on freight stock of indian railways, conforming to indian railway str no. ab/rb-40-2016 (rev.2) of june 2021. (2) backing ring without vent hole for class e (6 x11 ) rdso drg. no. wd-92089-s-01 alt-1, item no. 9 and as per indin railways str no. ab/rb-40-2016 (rev.2) (3) axle end cap for class e (6 x11 ) rdso drg. no. wd-92089-s-01 alt-1, item no. 6 and as

Narrow jaw adapter class-k (6 1/2 x 9 ) as per rdso drg. no. wd-15020-s-03, alt. 8 or latest & confirming to rdso spec.: ab/rb-41-2016.

Set of traction motor taper roller suspension bearings (pe and ce) to rdso spec no. mp-0.2402.17 (rev.-02) march-2021 and hitachi drg. nos. 10r812-077. alt. a & 10r812-078 ,alt.- a

1. machined washer a25 as per drg.no. is:2016-67 table-1, coating as per mdts-057, packing instruction - pi042 as per drg.no. is:2016-67 table-1, coating as per mdts-057 specn: is:2016-67 table-1, coating as per mdts-057 2. set of punched washers for fiat bogie consisting of 03 items. item no.1. punched washer a14 (16nos)- is:2016-1967, material steel to is:2062, coating as per mdts-057.,item no.2. punched washer a18 (32 nos.)- is:2016-1967, material steel to is:2062-2011 reaffirmed 2021, coat

Aar approved/rdso approved grease for cartridge taper roller bearings of freight stock conforming to rdso specification no.wd-24-misc.2003 (revision-1) with amendment no.1 of october, 2016. aar /rdso approved brands: 1.exxon arapen rb-320 of m/s exxon mobil. 2. timken premium rail grease of m/s exxon mobil 3.shell alvania ep-d of m/s shell canada ltd. 4.mobilith shc 100 of m/s exxon mobil 5.mobilith shc 221 of m/s exxon mobil 6. shell gadus rail s3 aar al of shell oil products 7. servogrease r

For complete deion and other details, please refer to tender