C/o link road upper bhager fatoh to sarti kallari km 0/00 to 1/500 sh c/o rcc slab culvert 15.00 mtr span at rd 0/235 under dmft.

Restoration of rain damages onkalhel chatri jungrar road km 0/0 to 7/0 (sh c/o bed plate dirt wall wheel guard railing sabl etc. of 3.00 mtr span culvert at rd 3/380 and5/305 along with wing walls)

Rrd on moviseri to dalikar road km. 0/00 to 14/00 (sh c/o extension of 900 mm dia hume pipe culvert with both side crate wall at rd 12/300)

Sink or wash basin ceramic,urinal pot with all fitment items,wc indian type and p trap and foot rest complete set,upvc pipe 0 point 5 inch 6 mtr long,pvc pipe 0 point 75 inch 6 mtr long,pvc pipec 110 mm dia 6 mtr long,door latches,pvc elbow,pvc coupler,pump 1 hp,end cap,ball valve 25 mm,tank connector,pipe nipple,brass nipple,waste coupling,pvc pipe 4 inch dia,rubber washer,water tap 1 inch,jet spray,stop cock 1 or 2 inch dia isi mark,glue,teflon tape,pvr machine,alkathene pipe 2 inch dia,bib cock 1 or 2 inch dia,ppr stop cock 1 inch dia,ppr stop cock 1 or 2 inch dia,gi pipe 3 or 4 inch dia 6 mtr long isi mark,gi pipe 1 inch dia 6 mtr long isi mark,gate valve 1 inch dia isi mark,gate valve 3 or 4 inch dia isi mark,gi tee 3 or 4 inch dia isi mark,gi elbow 1 inch dia isi mark,gi elbow 3 or 4 inch dia isi mark,gi couplings 3 or 4 inch dia isi mark,gi couplings 1 or 2 inch dia isi mark,waste pipe for wash basin,gi pipe 15 mm length of 6 m as per isi specification,ppr pipe clamping machine,ppr pipe 1 inch dia,ppr

S1 ms shuttering plate 1 point 20 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s2 ms shuttering plate 1 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s3 ms shuttering plate 1 mtr x 0 point 60 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s4 ms shuttering plate 1 mtr x 0 point 50 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s5 ms shuttering plate 1 mtr x 0 point 30 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s6 shuttering nut and bolt of size m12 x 50mm comma m12 x 60mm of good quality and branded,s7 round ms pipe 50mm dia x 6 mtr long x 3 point 5 mm thickness of good quality and branded,s8 round ms pipe 50mm dia

Ofc 24 core armoured,ofc 12 core unarmoured,40mm hdpe pipe with rope,gi pipe 2 inch dia,0.6mm warning tape,coupler for hdpe conduit,cemented men hole chamber with cover,joint enclosure 24 core ofc,joint enclosure 12 core ofc,sc sc patch cord 03 mtr,lc sc patch cord,splitter,splitter,splitter,splitter,media converter,optical network unit,optical line terminal,route marker for ofc concrete rcc mile stone shape painted orange with letter afnet and cias ofc painted with red using black enamel,e pon sfp module,cias server rack,joint markers for ofc,splice ofc 24 core lc fdf,12 core fdf for sc connector fully loaded,road crossing cma culvert crossing with gi pipe,hdd digging,manual digging laying and installation and commissioning of 24 core ofc and 12 core ofc at a depth of 1.65 mtr using hdpe pipe with warning tape and back filling

Provn of drilling bore of 150 mm dia upto 10 mtr depths or refusal defined as where n is value 100 of more for 30 cm or part of penetration spt as described in specs documents,collection of disturbed and undisturbed soil sample at interval of 1 mtr or at change of strata or as per relevant is code as described in specs documents,to carry out the test to ascertain soil profiles or proportion to determine safe bearing capacity with field and lab investigation as described in specs documents,conduct lab test on disturbed soil samples as considered necessary according to relevant specification of is 2720 as described in specs documents,conducting lab test on undisturbed soil sample as considered necessary according to relevant specification of is 2720 as described as described in specs documents,ground water table as described in specs documents

Ms flat 65 x 8 mm,ms flat 75 x 6 mm,ms flat 75 x 8 mm,ms flat 150 x 10 mm,ms roundbar 10 mm,ms roundbar 16 mm,ms roundbar 32 mm,ms roundbar 40 mm,ms sqaurbar 25 x 25 mm,ms pipe dia 50 x 3 mm,ms l channel 30 x 30 x 3 mm,gi sheet 24 swg , 2500 x 1200 mm,ss flat 50 x 3 mm,al flat 50 x 3 mm,power hacksaw blade 10 tpi 450 mm x 32 mm x 1.6 mm,tungsten electrode dia 2.5 mm,m.s.c.c. filler rod dia 2 mm,silver brazing flux,steel wire brush 200 mm, 4 rows of stainless steel wire,taflon tape 18 mm x 10 mtr,16 sqmm copper welding cable,file handle plastic 3 inch,grease lubricating, nlgi grade 3,petrolium jelly,emery paper 0 no,wooden screw 20 x 5 mm , 100 no per pkt,wooden screw 25 x 5 mm ,100 no per pkt,wooden screw 35 x 5 mm ,100 no per pkt,wooden screw 45 x 5 mm ,100 no per pkt,wooden screw 45 x 8 mm , 100 no per pkt,m.s. rivet snap head dia 6 mm x 75 mm long ,100 no per pkt,mild steel wire nail or dhabha khilli 2 inch , 100 no per pkt,10 mm x 150 mm candle,wooden gatti 2 inch , 100 no per pkt,capacitor 0.47 mfd 400 v

Construction of link road from gambhir mughlan more to chanja mohalla by way of earth work in cutting/filling 03 nos 1 00 mtr dia h p culvert 01 nos 0 60 mtr dia h p culvert and construction of walling in km 1st rd 0 500

Construction of road from gala to buli bandi tanveer mohalla ghambir mughlan by way of earth work in cutting filling 09 nos 1 mtr dia hp culvert 03 nos 0 60 mtr dia hp culvert and construction of walling in km 1st rd 0 500 2nd call