Blower motor suitable for roof mounted packaged ac unit for electrical locomotive as per rdso spec no rdso/2007/el/spec/0055, rev-2 or latest.

Blower motor for roof mounted packaged ac unit of electric locomotives, type: aom, 0.12kw, supply 415v ac +/- 10 percent , 3-phase, 0.4 amps, rpm 1350, star connection, reference is: 325, freq. 50hz, as per rdso spec. no. rdso/2007/el/spec/0055, rev.- 2 with latest if any. make: lhp or star electric. specification :- - rdso spec. no. rdso/2007/el/spec/ 0055, rev.-2

High reach pantograph for electric locomotives. rdso/2007/el/spec/0054 rev-3 amendment 2 str: rdso/2008/el/str/0049 rev 2 .

Procurement of condenser motor, 0.15kw, supply 415v ac +/- 10 percent , 3-phase, 0.7amps, 63 frames, rpm1350, star connection, reference is: 325, frequency 50hz suitable for roof mounted cab ac unit in wag9 hc electric locomotives as per rdso spec. no. rdso/2007/el/spec/0055, rev. - 2, or latest if any.

High capacity compressor 1745/1750 lpm for conventional electric loco. as per rdso spec no. rdso/2018/el/spec/0137 rev 0 and str no. rdso/2007/el/str/0015 rev 1 for on board mounting on a base frame

Evaporator blower wheels (lhs & rhs) with housing, for cab ac of wag7 locomotives. note: 1) item should be suitable for 2t capacity roof mounted cab ac of make daulatram / fedders lylord / sidwal fitted on conventional electric locos to rdso specification no: rdso/2007/el/spec/0055 rev.2 of nov 2007/revised on 07.10.2014. 2) one sample to be got approved before effecting bulk supply.

Associated component of machined stator assembly (11 items) for tm type 6fra 6068, (hard copy of 3-d cmm report must be provided with each set) specn/drg no:- as per clw spec.-4tms.096.068, rev-2 alt.-3, str: rdso/2007/el/str/0021 rev-1.

Set of flange gaskets for mph & radiator pipe lines of ac electric locos, each set consists of 12 gaskets as follows.. 1) gasket as per ref no. 1 of s.c.rly drawing no. a3/el/conv/3/2698,alt-c qty/set-3 nos. 2) gasket as per ref no. 2 of s.c.rly drawing no. a3/el/conv/3/2698, alt-c qty/set-3 nos. 3) gasket as per ref no. 3 of s.c.rly drawing no. a3/el/conv/3/2698, alt-c qty/set-4 nos. 4) gasket as per ref no. 4 of s.c. rly drawing no a3/el/conv/3/2698, alt-c qty/set-2 no

Set of spares for water reservoir assembly of wiper for 3 phase locos as per clw spec. no. clw/ms/3/50 alt-6, clw drawing no. 1209-07-303-020. (water reservoir with ca0pacity of 08 ltrs) . set details as follows: 1) water reservoir with capacity of 08 ltrs, qty. = 01 no. 2) mounting plate , qty. = 02 nos. 3) water tank filter, qty. = 01 no. 4) plug , qty. = 01 no. 5) ss hex. screw m5 x 12 , qty. = 04 nos. 6) o ring ,- dia-19 x 3mm qty. = 02 nos. one set consists of 06 items in 11 nos. materia

Set of blocking diodes illumination test (position no. 123) & its accessories as per clw specn.no. clw/es/3/0055, alt-h, one set consists of 04 items aggregating to 17 pieces as follows: (1) diode block 1.5a, 1600v, type diblo-5, dsi30-16a as per abb document no. hbtb585480 r0001, qty:01 no. (2) connector socket 14 poles, 6a, 240v, ac, as per abb document no. hbt415175p0001, qty:01 no. (3) contact as per abb document no. hbt415176 p0001, qty:14 nos. (4) wire clip as per abb document no. hbt415